Memory Commands

Memory Commands

Generated from FlexLib v4.2.18

Memory channel operations

---

Wire Protocol

Commands follow the FlexRadio TCP wire protocol:

C[D]<seq_number>|<command> [sub-command] [parameters]

Where:

• C = Command prefix
• D = Optional debug flag
• <seq_number> = Sequence number for command tracking
• <command> = Primary command word
• [sub-command] = Optional sub-command
• [parameters] = Command-specific parameters

Responses follow the format:

R<seq_number>|<result_code>|<data>|[debug_info]

Where:

• R = Response prefix
• <seq_number> = Matching sequence number from command
• <result_code> = Result code (0 = success, non-zero = error)
• <data> = Command-specific response data
• [debug_info] = Optional debug information

Common Response Codes

Code	Meaning
0	Success
50000001	Unable to get foundation receiver assignment
50000003	License check failed
50000004	Parameter error
50000005	Incorrect number or type of parameters
50000016	Malformed command
5000002C	Incorrect number of parameters
50000032	Bad mode

---

Commands

memory remove ...

Remove

Syntax:

C<seq>|memory remove <index>

Parameters:

Parameter	Description
<index>

Response Example:

R<seq>|0||

memory apply ...

Select

Syntax:

C<seq>|memory apply <index>

Parameters:

Parameter	Description
<index>

Response Example:

R<seq>|0||

memory set

Syntax:

C<seq>|memory set <index> <parameter>=<value>

Parameter	Description
owner
group
freq
name
mode	Valid values: Off, CTCSS_TX
step
repeater	Valid values: Down, Simplex, Up
repeater_offset
tone_mode	Valid values: Off, CTCSS_TX
tone_value
squelch
squelch_level
power
rx_filter_low
rx_filter_high
rtty_mark
rtty_shift
digl_offset
digu_offset

Response Example:

R<seq>|0||

memory create

Request Memory

Syntax:

C<seq>|memory create

Response Example:

R<seq>|0||