WAN Commands

WAN Commands

Generated from FlexLib v4.2.18

Wide Area Network remote access

---

Wire Protocol

Commands follow the FlexRadio TCP wire protocol:

C[D]<seq_number>|<command> [sub-command] [parameters]

Where:

• C = Command prefix
• D = Optional debug flag
• <seq_number> = Sequence number for command tracking
• <command> = Primary command word
• [sub-command] = Optional sub-command
• [parameters] = Command-specific parameters

Responses follow the format:

R<seq_number>|<result_code>|<data>|[debug_info]

Where:

• R = Response prefix
• <seq_number> = Matching sequence number from command
• <result_code> = Result code (0 = success, non-zero = error)
• <data> = Command-specific response data
• [debug_info] = Optional debug information

Common Response Codes

Code	Meaning
0	Success
50000001	Unable to get foundation receiver assignment
50000003	License check failed
50000004	Parameter error
50000005	Incorrect number or type of parameters
50000016	Malformed command
5000002C	Incorrect number of parameters
50000032	Bad mode

---

Commands

wan register owner_token=...

Syntax:

C<seq>|wan register owner_token=<owner_token>

Parameters:

Parameter	Description
<owner_token>

Response Example:

R<seq>|0||

wan unregister owner_token=...

Syntax:

C<seq>|wan unregister owner_token=<owner_token>

Parameters:

Parameter	Description
<owner_token>

Response Example:

R<seq>|0||

wan set public_tls_port=... public_udp_port=...

Wan Set Forwarded Ports

Syntax:

C<seq>|wan set public_tls_port=<tcpport> public_udp_port=<udpport>

Parameters:

Parameter	Description
<tcpport>
<udpport>

Response Example:

R<seq>|0||

wan set public_tls_port=-1 public_udp_port=-1

Wan Set Forwarded Ports

Syntax:

C<seq>|wan set public_tls_port=-1 public_udp_port=-1

Response Example:

R<seq>|0||

wan validate handle=...

Creates a TCP client and connects to the radio

Syntax:

C<seq>|wan validate handle=<wanconnectionhandle>

Parameters:

Parameter	Description
<wanconnectionhandle>

Response Example:

R<seq>|0||