TSUN MS800 with Y47 s/n and firmware 5.1.0.9

[oliof]

Hi,
I have a TSOL-MS800 (sold as MS-600 but identified by the proxy as MS800) with the following combination

Firmware version according to the information on the web service of the inverter is LSW5BLE_17_02B0_1.08-D1

My configuration for this is

  - serial: Y47xxxxxxxxxxxx
    monitor_sn: 2083185627
    modbus_polling: true
    node_id: "600"
    suggested_area: Dach
    client_mode.host: 192.168.xx.xx
    client_mode.port: 8899
    client_mode.forward: true

tsun-gen3-proxy identifies the device as a "TSOL-MS800 by TSUN".

Connection via local mode works, so this seems to behave like a GEN3Plus device .... but some entities aren't populated, in particular:

• Daily Generation
• Inverter Alarm
• Inverter Fault
• Total Generation

show as unknown. The entities crossed out eventually showed up. Daily generation probably didn't hit the threshold today because I set the system up in the later afternoon and the setup of the panels is not ideal due to limited options where to put them.

Otherwise Overall, this setup works really well. I don't think anything needs to be done to improve its functiion, but it seems to be a configuration that is outside what's covered in the repo's README so I wanted to share.