Skip to content

Standalone Tools

lbergsten edited this page Jun 25, 2018 · 3 revisions

ContinousCameraStageV2

This tool is extremely useful for general surveys of the stave and other materials. It provides an easy layout for moving the stage in XYZ directions. It also allows the user to do a few quick calibrations within the VI including autofocusing, pattern matching, and calculated microns/pixel (if viewing a selection of strips).


CreateStaveMapFromCalibration

This tool takes in a previous full calibration (file called Calibration.ini) and creates a stave map. This is useful for changing a calibration for one fiducial mark into the map for another. It takes less than a second to run and requires only a few inputs.


VMP_TestStand

This tool allows one to run module placement without re-running a full calibration. It requires inputs including paths to the virtualstave.csv file to use and to where to save results as well as fiducial marks used. Extremely useful during module placement (one calibration/day then multiple modules placed).


visuallyInspectPositionListResults3

This tool allows the user to program the stage to take a series of photos. Version 2 saves the photos for analysis offline while version 3 does pattern matching on the fly and saves only coordinates of the pattern matched and not the images. This is useful for surveys of the stave and other materials and for camera stability tests.

Clone this wiki locally