Repository navigation
Tooling Pins
Primary Author: Prajita Bhattarai (pbhattarai1s@brandeis.edu)
The stave has 5 locking points where tooling pins are inserted. The tooling pins are used in the calibration of the stave assembly to define the origin and to find the angle between the stage and the stave. Several versions of the tooling pins have been used so far. The first version was a cylindrical metal pin where we pattern matched the edge of the pin. The second version was a conical metal pin where the tip of the pin was found by pattern matching whereas the third pin was a brass pin with two circles where the center of the hole was found by using a circle fit. Results from a simulation-based study showed that pattern matching with LabVIEW is more robust than the circle fitting algorithm. The fourth version, the 3D printed pins were designed to match the pattern and was found to be the most reliable pins so far.






