Replies: 22 comments 32 replies
|
Chunks fade in,it seems to be possible to run by adding a config file in the config folder. |
|
Thanks for the info I changed now👍 |
|
I just found out that this configuration file needs to be loaded in the game and needs to be pre-loaded, add it to the config folder, and then restart it to use Chunks fade in normally. |
|
Nvidium works just fine alongside Embeddium with some dependency config tweaking. i found the solution in this reddit comment I used the same way for Indium |
|
@Starexify try turning off translucent face culling, i did that and it fixed all of the issues with blocks not rendering |
|
I will try |
|
I can't find the option "Translucent Face Culling" anywhere |
|
should be options>video settings>advanced |
|
Which embeddium and nvidium versions ?? |
Yup xd when I tested 0.2.18 was latest. So you can edit the compatibility table with note about needing to edit config files and using specific versions |
|
I tried again and it still doesnt work, I used the
and only used these mods on latest version Neoforge 1.20.1: Edit: Found out its not nvidium that breaks the launching and immediatelyfast |
|
It should work even without ImmediatelyFast and Lazurite. Try without ImmediatelyFast, im having ImmediatelyFast-Forge-1.2.8+1.20.4. maybe NeoForge version causing a crash for you? Edit: here are minimum mods i used to run Nvidium on latest forge 47.2.20: and of course modified configs Edit:
So it needs to run with Forge version of immediatelyfast instead of Neoforge. Weird but ok |
|
On NeoForge it works with the forge version of ImmediatelyFast. But I think one of the fabric mods I have crashes it, I will try these days to see which crashes with nvidium and note everything |
|
Can you share with me your mods? maybe i encountered a problem with one of them while i had installed nvidium |
|
Good to know. i downloaded TexTrue before newest version was released. Off topic - "Iron's Spells and Spellboks" don't work with fabric GeckoLib. Crashes when rendering 3D models. |
|
Pipez's Item Pipe and Tech Reborn's machines (inventory blocks in general) incompatibility - they do not connect / transfer items.
However, Item Pipes shows a connection to Tech Reborn's Storage Units, but they do not transfer any items. Not sure how it would be fixed, thought. I would imagine that it would connect to any block entities that extend somekind of Inventory interface. Note that Fluid and Energy pipes works, thanks to Connector Extras. Connector 1.0.0-beta.39+1.20.1 |
|
Well, after hours and hours of learning, browsing Tech Reborn's code, learning Fabric's transaction API and Forge's way of handling items, I have came up with this Also, I do not know how I would get limit of the stack size for specified slot in the container, since vanilla's container does not care about per-slot max stack size to my knowledge. Not sure if usable, but sending it here regardless. /**
* A Forge IItemHandler that wraps a Fabric Storage
*
* @author <a href="https://mayuna.dev">Mayuna</a>
*/
@SuppressWarnings("UnstableApiUsage")
public class FabricItemStorage implements IItemHandler {
private final Storage<ItemVariant> storage;
private final Container container;
/**
* Create a new FabricItemStorage
*
* @param storage The storage to use
* @param container The container to use
*/
public FabricItemStorage(Storage<ItemVariant> storage, Container container) {
this.storage = storage;
this.container = container;
}
@Override
public int getSlots() {
return container.getContainerSize(); // Fabric's Storage API does not have a concept of slots, so we return the size of the container
}
@Override
public @NotNull ItemStack getStackInSlot(int i) {
return container.getItem(i); // Fabric's Storage API does not have a concept of slots, so we return the ItemStack in the specified slot from the container
}
@Override
public @NotNull ItemStack insertItem(int amount, @NotNull ItemStack itemStack, boolean simulate) {
if (itemStack.isEmpty()) {
return itemStack; // Uhh... what?
}
// Open a transaction to insert the item into the storage
try (Transaction transaction = Transaction.openOuter()) {
// Insert the item into the storage
long inserted = storage.insert(ItemVariant.of(itemStack), itemStack.getCount(), transaction);
// If the transaction was simulated or no items were inserted, return the original stack
if (simulate || inserted == 0) {
return itemStack;
}
// If the transaction was not simulated, return a copy of the stack with the amount of items that were not inserted
transaction.commit();
return ItemHandlerHelper.copyStackWithSize(itemStack, (int) (itemStack.getCount() - inserted));
}
}
@Override
public @NotNull ItemStack extractItem(int slot, int amount, boolean simulate) {
ItemStack stack = container.getItem(slot); // Get the ItemStack in the specified slot
// If the ItemStack is empty, return an empty stack
if (stack.isEmpty()) {
return ItemStack.EMPTY;
}
// Open a transaction to extract the item from the storage
try (Transaction transaction = Transaction.openOuter()) {
long extracted = storage.extract(ItemVariant.of(stack), amount, transaction);
// If the transaction was simulated or no items were extracted, return an empty stack
if (extracted == 0) {
return ItemStack.EMPTY;
}
// If the transaction was not simulated, commit the transaction
if (!simulate) {
transaction.commit();
}
// Return a copy of the stack with the amount of items that were extracted
return ItemHandlerHelper.copyStackWithSize(stack, (int) extracted);
}
}
@Override
public int getSlotLimit(int slot) {
// TODO: Get max size of stack in specific slot.. Dunno how
return container.getMaxStackSize(); // Usually 64
}
@Override
public boolean isItemValid(int slotIndex, @NotNull ItemStack itemStack) {
return container.canPlaceItem(slotIndex, itemStack);
}
} |
|
NEEPMeat does not load and will not even produce an crash report. Have a latest.log. Install contains only the barebones and dependency. |
|
Use fabric geckolib |
|
Does ars noveu work With sinytra |
|
Yes |
|
does someone know about a way to make synitra compatible with embeddium ? |
|
Embeddium is compatible with connector |
|
it wasn't for me because of TLauncher that make a update later. |
|
I was playing with sinytra connector and when i wore a armor piece my game crashed and showed up some armor stand issue , the mods that might have caused the issue are better end , better nether and epic fight i think these mods might be incompatabile but i tried this like a months ago so i dont know if this issue still comes up i am going to check that right after this. I can provide u with logs and crash report if that helps. |
|
i tried to replicate it but this time minecraft just went unresponsive and didnt respond so i closed it from jdk |
|
i found a photo of the same error that i saved |
|
Yeah, exact problem for me, I tried everything. The only thing that I can think of is trying to downgrade epic fight to a version that might not crash, but I don't know how much I need to go back. I also wanted to try to post this issue on their GitHub issues page and see if they can resolve this problem |
Why Origins is not working? |
|
I left this page since I stopped playing modded for a time and started modding instead (also no longer play on 1.20.1 so I won't update this any time sooner) but maybe someone else can help 👍 |
|
Debugify is now compatibility |
|
Do we need to disable anything in the settings of Debugify, or can we just install it? |
Just install it |
|
origins and better nether do not work |
|
there is a incompatibility with the mod '' defile '' from doctor4t (all the dependencies needed are: ratatouie and satin) |
|
other mods of his dont work either. i tried arsenal and that didnt work |
|
I know, it's because of the mixin : sinnytra don't let defile (or other mods) access ratatouille. |
|
and there are no traduction (fabric to forge) of some mixin. |
|
It also seems to be incompatible with the newest 3-4 1.20.1 versions of the Effective mod. |
|
VulkanMod is incompatible |
|
ClickSigns 1.0.4 doesn't work, however 1.0.2 and 1.0.3 do work. |
|
Better Fog doesn't work completely, fog effects seem to be ignored when Sinytra is present. |
|
could just be an issue like some other mods where for some reason with sinytra is doesn't create the necessary config files, best help I can give you is to check if you have the mod works fine without sinytra and to see if there are any issues with the mod reading the config file with sinytra reinstalled |
|
Hi, I am getting an crash before Minecraft boots and in the Modrinth logs it says BetterNether is responsible. Is there a way to fix this or is it just not compatible? Thanks. |
|
and here's the first bit of the crash logs: net.minecraftforge.fml.loading.EarlyLoadingException: Could not execute entrypoint stage 'main' due to errors, provided by 'betternether' at 'org.betterx.betternether.BetterNether'! |
|
do you also have connector extras installed? if not install it and try again and for safety, delete the betternether.json file from your config folder if present |
|
Can I use the mod Auto Lectern with it? https://modrinth.com/mod/auto-lectern For version 1.20.1. |
|
If anyone has any idea that would be great help! |
|
Raknetify seems to not work (again?) (a lot more mixins don't succeed either) |
|
Cardinal Components and Fabric Language Kotlin are both compatible, Immersive Portals for Fabric is incompatible, but the Forge version causes no issues. |
|
can you give me the full modlist because embeddium and hexal do not work together for me when i join a server |
and others
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
Info
I wanted to make this list of mods that doesn't work together with the Connector, for the reason that if someone finds incompatibilites and doesnt know which mod does that, to come here and find out which mods are incompatible. Some fabric mods are incompatible with other fabric mods aswell!
Incompatible Mods
Compatible Mods
Nvidium parity beta37+
connector.json
fabric_loader_dependencies.json
If you use ChunksFadeIn just use this instead of the 2nd config file:
fabric_loader_dependencies.json
Nvidium parity under beta36
connector_global_mod_aliases.json
fabric_loader_dependencies.json
If you have any mods that are incompatible, leave them below. I'll try to add them all!
All reactions