STM32H733VGT6 doesnt boot into program #2900
Description
Describe the bug
After uploading my blinking LED programm to my chip it doesnt blink. Uploading works without issues with the STLink V3 Minie, but the Chip doesnt seem to boot into the programm afterwards
To Reproduce
Write a simple blinking LED programm. (In my case on PIN PE8). Set pinmode and let the pin "blink" every half second in the loop. Upload the code and wait for nothing to happen.
The reason i think its not booting into the program at all was because i made a for loop that activates every pin because i thought the pin definitions might be wrong.
Expected behavior
Chip gets power and the LED on Pin PE8 starts flashing.
Desktop:
- OS: Windows 11
- Arduino IDE version: 2.3.7
- STM32 core version: 2.12.0
- Upload method: SWD via STLink V3 Minie
Board (please complete the following information):
- Name: STM32H733VGTx Generic
- Extra hardware used if any: STLink V3 MINIE
Additional context
Since I added the Generic Boards for this chip I am pretty stumped that it doesnt work. It doesnt seems like a hardware problem. I tested it with BOOTSEL on all possible Logic levels