Author

• Haokun Luo (haokun@umich.edu)

Install MobiBand

Client

• Connect your Android device to your PC
• Download the zip file and unzip it on your PC
• Type in command "adb install client/bin/MobiBand.apk"
• Launch the application "MobiBand"
• "Hostname/IP" is either the hostname or IP address of your server (for TCP and ICMP)
• "Port #" is the port number that should be consistent with your server (for TCP only)
• "Packet Size" is the single packet size that will be repeated "Total number of Packet" times (for TCP and ICMP)
• "Integr-packet Time" is the inter-packet timing in between two consecutive packets. It is fine to leave as "0". (for TCP and ICMP)
• "Total number of Packet" is the total packet number of TCP packet that being send along the "chain" of TCP packets (for TCP only)
• "Up" and "Down" button is select either uplink or downlink measurements (for TCP only)
• "TCP" and "ICMP(Ping)" is to choose between TCP or ICMP measurements (for TCP and ICMP)
• "Run" button is to start the measurement (for TCP and ICMP)
• "Stop" button is to stop the measurement (for TCP only)
• NOTE: if your phone doesn't contain a default Ping Program, please copy "resource/ping" to "/system/bin/" to your device.

Server

• "scp" the server folder to a remote server, i.e. ep2.eecs.umich.edu
• Make sure no applications are running on the port that MobiBand reserved (default is 10100)
• Run "./start.sh"

Run the application

TCP

• Once you start the server process (make sure that server's hostname and port number match the "Hostname/IP" and "Port #" fields on the MobiBand)
• Choose either "Up" or "Down" button
• Select "TCP" radio button
• Press "Run"
• Results will be displayed on the screen

UDP

• Select "ICMP(Ping)" button
• Press "Run"
• Results will be displayed on the screen