gridworks-scada-protocol.v1.0.0.dev4

Changes

• Bump versions so release job on main will run (#370) @anschweitzer
• gwsproto and gwadmin (#369) @anschweitzer
• gwsproto and gwadmin (#368) @anschweitzer
• Add test for scada.auto_state home alone -> atn transition (#362) @jessicamillar
• Interface tweaks (#359) @anschweitzer
• test_async_power_update (#355) @jessicamillar
• Various tweaks related to comments on PR #355 (#357) @anschweitzer
• ScadaLiveTest (#353) @anschweitzer
• remove actors.message from codec (#352) @jessicamillar
• Jm/codec (#351) @jessicamillar
• debugging the tank module code (#349) @jessicamillar
• Td/3 layer tanks (#348) @jessicamillar
• Merging main to 3 layer tank branch (#346) @thdfw
• Static Analysis in vscode (#326) @anschweitzer
• Has-a refactor (#341) @anschweitzer
• clarify home alone strategy in logs (#345) @jessicamillar
• Changes to match gwproactor v4 (#344) @anschweitzer
• Jm/sieg (#343) @jessicamillar
• Add home alone "summer" strategy (#342) @jessicamillar
• HomeAlone Strategies share a base, StratBoss removed (#340) @jessicamillar
• Jm/ha strategy (#339) @jessicamillar
• Limit gwprotoactor and gwproto to <2 (#338) @anschweitzer
• Tank model now has 3 clusters and 2 thermoclines (#337) @thdfw
• Decouple computing bid from building graph (#336) @thdfw
• PreComputedSuperGraph - oak winter first commit (#335) @thdfw
• StratBoss and RelayMultiplexer improvements (#333) @jessicamillar
• Jm/slow contract (#331) @jessicamillar
• Running FLO in separate thread (#330) @thdfw
• Hinge! (#329) @thdfw
• Updating branch with latest changes on main (mostly stratboss) (#328) @thdfw
• fix for h -> aa transition when stratboss is running (#327) @jessicamillar
• Various bus squashed and changes (#325) @jessicamillar
• Jm/strat boss - maintain stratification through heat pump state changes (#324) @jessicamillar
• Bring latest main updates to stratboss (#323) @thdfw
• hack oil dispatch messages (#321) @jessicamillar
• Jm/pipes (#320) @jessicamillar
• Jm/temp backoff (#318) @jessicamillar
• HomeAlone normal responsible for initializing relays 5 and 8 (#317) @jessicamillar
• WIP attempt at recreating pyModbusTCP client; untested (#316) @anschweitzer
• Jm/send forecasts (#315) @jessicamillar
• AllyGivesUp and goes back to HomeAlone if no forecasts (#313) @jessicamillar
• synth generator bug re using local weather forecast fixed (#312) @jessicamillar
• Jm/picocycle (#311) @jessicamillar
• Scada2 subscribes to topic published to by scada link management (#310) @anschweitzer
• Add glitch, ScadaInit -> GameOn, update some other types (#308) @jessicamillar
• As/eguage (#309) @jessicamillar
• Td/scadablindweather (#304) @jessicamillar
• Adding LoadOverestimationPercent for HA load estimation (#300) @thdfw
• Add AdminDispatch (#299) @jessicamillar
• Jm/ha top state (#296) @jessicamillar
• Sending remaining elec to ATN (#297) @thdfw
• Timeout has a maximum in Scada, and a default in Admin (#298) @thdfw
• Jm/type updates (#295) @jessicamillar
• Reformatting relay table, adding timer (#294) @thdfw
• Jm/small clean (#293) @jessicamillar
• keepalive buttons from td/admin (#292) @anschweitzer
• admin: use table implementation of relay display; add improvements to relay names. (#290) @anschweitzer
• admin: relays in a table (#289) @anschweitzer
• take out requests from atn and synth - from Andy's earlier PR (#288) @jessicamillar
• Jm/atn debug (#287) @jessicamillar
• how about this (#286) @jessicamillar
• admin button ui as an option (#283) @anschweitzer
• Td/atn (#285) @jessicamillar
• Td/tankdebug (#284) @thdfw
• Td/hp onpeak (#282) @thdfw
• Jm/stats: add relay functionality for thermostats (#280) @jessicamillar
• admin: update dependencies; fix 'gws' for pi (#279) @anschweitzer
• Debug new relay commands (#278) @jessicamillar
• Jm/merge (#277) @jessicamillar
• Td/aa (#276) @jessicamillar
• Td/hack (#275) @jessicamillar
• Td/synth (#274) @jessicamillar
• Jm/params (#271) @jessicamillar
• Jm/various (#270) @jessicamillar
• Jm/dfr (#269) @jessicamillar
• .env file used by 'gws admin' commands. (#267) @anschweitzer
• Td/debug: fix storage fullness estimation, various pico-cycler bugs (#268) @jessicamillar
• forward events from downstream to upstream (#261) @anschweitzer
• Jm/homealone merge (#266) @jessicamillar
• Jm/report event (#264) @jessicamillar
• Fix snapshot generation to include states (#263) @jessicamillar
• ApiFlowModule creates problem.event when flatlined (#260) @jessicamillar
• Analog Temp and stats report to scada2; all else to scada (#259) @jessicamillar
• Jm/layout - send a short version of layout on boot (#258) @jessicamillar
• New MQTT topic format which includes the source and destination in the topic (#254) @anschweitzer
• Update to match changes in gwproactor as/tree branch (#255) @anschweitzer
• run_scada.py supports parentless; service2 is a service for parentless (#256) @anschweitzer
• Updates to match change from gwproto.types to gwproto.named_types (#257) @anschweitzer
• Merge changes on main to as/topic (#253) @anschweitzer
• Jm/flow module: MVP PicoFlowModule for EKM (#251) @jessicamillar
• fix real bug (#252) @jessicamillar
• Jm/scada listens (#249) @jessicamillar
• scada2 listens to scada (#247) @jessicamillar
• Ported dashboard from jm/atn-ui (#245) @anschweitzer
• Jm/my dcs: WITH NEW GWPROTO (#244) @jessicamillar
• Jm/debug temp (#243) @jessicamillar
• ShNode 2.0.0, DataChannels, Status -> Report (#242) @jessicamillar
• Updates to match gwproto, gwproactor (#240) @anschweitzer
• Match gwproto, gwproactor changes (#241) @anschweitzer
• pydantic v2 (#239) @anschweitzer
• Use updated proactor with reupload fix (#237) @anschweitzer
• Pull changes on main onto jm/atn-ui (#236) @anschweitzer
• Add support for processing hubitat events over a web server. (#235) @anschweitzer
• Minor edits to layout_gen (#231) @jessicamillar
• Jm/params (#229) @jessicamillar
• Jm/derive: Update local code gen tools (#228) @jessicamillar
• Jm/aic: Use new version of gwproto with updated code gen (#227) @jessicamillar
• layout_gen: Re-use uids found in an existing hardware layout (#225) @anschweitzer
• Add ability to 'pause' the service (#224) @anschweitzer
• Add HubitatPoller (#222) @anschweitzer
• Make docs top level doc folder instead of wiki (#221) @jessicamillar
• Reverse ADS 0x4b and 0x48. ch 1 is now 0x4b AIN0 (#220) @anschweitzer
• SimpleSensor will sets loop delay from component attribute 'poll_period_s', if that attribute is present (#219) @anschweitzer
• Tank Module via HTTP/Hubitat/Fibaro (#216) @anschweitzer
• Support TLS and use TLS by default. (#214) @anschweitzer
• Changes to support gwproactor changes. (#212) @anschweitzer
• Merge driver fix from main (#211) @anschweitzer
• add error for voltage reading of 0 for temp sensors (#210) @jessicamillar
• Add NormallyOpen functionality and change Cac/Component name to Relay (#208) @anschweitzer
• As/relay hack (#207) @jessicamillar
• Move hardware-layout data_classes and schema to gwproto (#205) @jessicamillar
• Jm/power (#204) @jessicamillar
• Jm/power watts (#203) @jessicamillar
• GtDispatchBooleanLocal uses Name instead of Alias for SpaceheatNode (#200) @jessicamillar
• Makes TelemetryReportingConfig hashable (#199) @anschweitzer
• Revert "Power meter measuring multiple things, part 1" (#196) @anschweitzer
• DisplayName optional in Cacs (#194) @jessicamillar
• Power meter measuring multiple things, part 1 (#195) @anschweitzer
• Merge changes from jm/type (#193) @anschweitzer
• Proactor code now in gridworks-proactor package (#192) @anschweitzer
• Move proactor test infrastructure to gwproactor_test (#191) @anschweitzer
• Renames - remove "2" from names (#190) @anschweitzer
• Remove actors-v1 code (#189) @anschweitzer
• Run proactor comm tests for dummy proactor and for scada (#188) @anschweitzer
• Tolerate more driver warnings (#187) @anschweitzer
• Add air temp (#183) @jessicamillar
• Jm/pipedebug (#182) @jessicamillar
• breaking change to telemetry name enum (#181) @jessicamillar
• As/status (#180) @jessicamillar
• add conversion factor for pipe flow (#179) @jessicamillar
• Add pipe flow meter (#178) @jessicamillar
• As/multipurpose (#177) @anschweitzer
• Smoothing out response to errors in drivers. (#173) @anschweitzer
• Multipurpose driver (#170) @anschweitzer
• Scada in repl (maybe) (#168) @anschweitzer
• EGauge power meter driver (#165) @anschweitzer
• Initial HomeAlone experiment (#159) @anschweitzer
• Exceptions in MQTT main loop no longer crash scada (#158) @anschweitzer
• Jm/pumpstat (#154) @jessicamillar
• Jm/thermistor (#153) @jessicamillar
• Add logging for drivers by passing settings (#151) @jessicamillar
• Systemd service instructions / watchdog interation; driver error propagation (#150) @anschweitzer
• Acking cleanups (#137) @anschweitzer
• local dev rabbit broker for scada.gridworks_mqtt (#136) @jessicamillar
• reformat the response to atn.snap (#135) @jessicamillar
• Add driver for G1_NcdAds1115_Ntc10k for pi and stub of that for mac (#134) @anschweitzer
• Scada / atn comm liveness is now monitored. (#133) @anschweitzer
• less ad-hoc ack management (#131) @anschweitzer
• Event reports (#130) @anschweitzer
• Merge cleanup for gwproto cleanup to main (#129) @anschweitzer
• Scada's my_simple_sensors() now includes nodes with Role.ROOM_TEMP_SENSOR (#127) @anschweitzer
• New test atn based on proactor in tests.atn (#126) @anschweitzer
• Rename 'test' to 'tests' to avoid import conflict (#124) @anschweitzer
• Use gwproto package for messages (#123) @anschweitzer
• Import simplification and isort (#13) (#122) @anschweitzer
• New message envelope and decoder mechanics (#121) @anschweitzer
• Don't set logging level root logger (#120) @anschweitzer
• Logging: rolling file handler, usage python logging module instead of print. (#119) @anschweitzer
• Replace houses.json with hardware-layout.json and HardwareLayout objects (#118) @anschweitzer
• update pi setup instructions (#117) @jessicamillar
• Allow tests to run on the pi. (#115) @anschweitzer
• More proactor tests (#114) @anschweitzer
• experiment (#113) @anschweitzer
• no relays in garage right now either (#112) @jessicamillar
• a few more wiki updates (#111) @jessicamillar
• Cut out the temp sensors that do not exist (#110) @jessicamillar
• Update to python 3.10 (#109) @anschweitzer
• actors2.PowerMeter & tests (#108) @anschweitzer
• Jm/rabbit integration (#107) @jessicamillar
• Jm/emon (#106) @jessicamillar
• Proactor - initial implementation / WIP (#105) @anschweitzer
• Add PYTHONPATH to .env for vscode testing (#104) @jessicamillar
• Jm/rename snapshot (#103) @jessicamillar
• Protocol fragment tests (#101) @anschweitzer
• try to get logging always UTC ISO format (#102) @jessicamillar
• update readme and remove template_settings (#100) @jessicamillar
• Settings object with Pydantic (#99) @anschweitzer
• coverage for boolean actuator (#98) @jessicamillar
• Add flush house and improve coverage of actor_base (#97) @jessicamillar
• Jm/dispatch (#96) @jessicamillar
• Add test of re-subscribe on mqtt connection restore. (#94) @anschweitzer
• Refactor test files (#93) @anschweitzer
• Run mosquitto mqtt brokers in CI (#92) @anschweitzer
• Jm/remove ear. WARNING: requires update to settings.py (#89) @jessicamillar
• Jm/status (#88) @jessicamillar
• clean up schema derivations (#86) @jessicamillar
• minor scada refactor (#85) @jessicamillar
• Add tests for serial schema pattern (#84) @jessicamillar
• test dataclass - schema conversions (#83) @jessicamillar
• Simplify dataclasses and add more tests (#82) @jessicamillar
• black many schema and add derive schema tests (#81) @jessicamillar
• Jm/meter - begin reading a Schneider Electric IEM 3455 in the garage (#76) @jessicamillar
• One client per actor (#75) @anschweitzer
• Jm/better simple sensor (#74) @jessicamillar
• Jm/debug scada - added loop_start for the cloud connections (#73) @jessicamillar
• fix PipeFlowMeter input (#72) @jessicamillar
• Jm/various: input data by ATN_G_NODE_ALIAS, add drivers (#71) @jessicamillar
• Re-subscribe on re-connected, command line utils. (#69) @anschweitzer
• init()/start() cleanup and responsive sleeps (#70) @anschweitzer
• Move choice for ear status csv download out of Ear class (#67) @jessicamillar
• move real README to top level (#65) @jessicamillar
• Jm/decouple: decouple ActorClass from Role (#63) @jessicamillar
• bug not caught by test (#62) @jessicamillar
• Jm/status fix (#61) @jessicamillar
• Jm/cli (#60) @jessicamillar
• Add fan radiator's relay (#58) @jessicamillar
• Little step in debugging mqtt fails (#57) @jessicamillar
• Jm/another pipe temp sensor (#56) @jessicamillar
• Jm/debug pipe (#55) @jessicamillar
• pipe temp sensor added in garage (#54) @jessicamillar
• garage config changes - only one tank temp sensor (#53) @jessicamillar
• fix debug log writing (#52) @jessicamillar
• actors pass black -l 100 and pycharm (#51) @jessicamillar
• MQTT debugging, output folder, clean up actor running scripts (#50) @jessicamillar
• dispatch includes to_alias (#49) @jessicamillar
• Jm/atn sends dispatch (#48) @jessicamillar
• Jm/csv works (#47) @jessicamillar
• Add mypy and black to requirements (#46) @jessicamillar
• Add Coverage reporting (#43) @anschweitzer
• Jm/relays report (#45) @jessicamillar
• Jm/status (#42) @jessicamillar
• Add start and stop (#38) @jessicamillar
• Jm/refactor names (#37) @jessicamillar
• fix typing for by_id and by_alias dicts (#36) @jessicamillar
• fast power reporting test works (#32) @jessicamillar
• Add test_collect_temp_data() (#34) @anschweitzer
• Jm/simplify subscription (#33) @jessicamillar
• Jm/more cleanup (#31) @jessicamillar
• As/pytest (#29) @jessicamillar
• forgot to add code derivation for type-tuple exchange (#28) @jessicamillar
• Jm/update schema (#27) @jessicamillar
• Add steps to install mqtt to readme (#5) @preeth1
• Example unit tests file + github actions (#4) @preeth1
• Removed schema/gt/gnr folder (#26) @jessicamillar
• Big code derivation update (#25) @jessicamillar
• rearrange init for primary_scada, mainly to check out stickler (#23) @jessicamillar
• Adding .stickler.yml configuration file (#22) @stickler-ci
• client ids 23 char random (#21) @jessicamillar
• Temporary logging in scada code for temperature calibration (#20) @jessicamillar
• MQTT publish works for more than 20 messages (#18) @jessicamillar
• Sensors do not send retained messages to mqtt broker (#16) @jessicamillar
• Calibrate temp sensors (#15) @jessicamillar
• MVP sense and publish water temp (#13) @jessicamillar
• Create derivation tools for, and then derive, dataclasses that come from the schema/gnode registry (#12) @jessicamillar
• made cacs and components subfolder and applied isort (#10) @jessicamillar
• Boolean actuation works in test bed for boost and pump (#9) @jessicamillar
• Add first secret using dotenv (#8) @jessicamillar
• python-dotenv example from end of pair coding session (#3) @preeth1
• utils -> helpers, add get_secret helper (#7) @jessicamillar
• Add test module to requirements (nose) (#6) @jessicamillar
• Rename variables (#2) @preeth1
• Linting on primary scada (#1) @preeth1