Set parameters and read and calculate values from SVM30 on Raspberry Pi

CSUS Senior Design Project 2021 Team members: Gil Clements | Aaron Costello | Alex Garcia | Max Repko | Richard Torres

Environment sensor with temperature, relative humidity and CO2, based on MSP-EXP430FR4133

Air quality monitor firmware

This is a driver of SGP30 for Arduino or ESP

An attempt to measure indoor airquality with ESP8266. Temperature, Pressure, Humidity, tVOC, CO2 and particulate matter.

"Smart radiator" is made from an old oil radiator that has a thermostat located on the radiator itself. Also an air quality detector wich is notifying on costumers mobile device when the air quality is low in order to open the window.

An ESP8266-based temperature/humidity/CO2/TVOC sensor.

Implementations of miscellaneous sensors

Home air quality monitoring. esp32 project to read sensors and write to influxdb and prometheus: PMS5003, S8, BMP180, SHT3X

Seeeduino Nano, EasySensors RFM95 eCO2 and VOC monitor for my Windows 10 IoT Core LoRa field gateways

ESP32Cam with Adafruit IO to send image, BME280 & GSP30 sensor values and device states using PubSubClient library & Python program to subscribe to the same topic.

As part of the thesis, a system was created that gives remote users at http://www.nerezisca-meteo.com/ an insight into current meteorological data as well as historical data display. The parameters to be measured are temperature, humidity, air pressure, solar radiation, wind speed and direction, carbon dioxide, carbon monoxide and air quality. T…

Sensirion SVM30 on Arduino, ESPxx, 32U4, Lorawan, DUE

Ambiance is an air quality monitoring system developed by PUP Hygears for our university. Designed to be user-friendly, it offers comprehensive web interfaces without compromising accuracy. This project served as a testing ground for my embedded system skills and provided an opportunity to teach my members about embedded systems, web design, github