A simple ESP32 based weather station

Se pretende equipar un ómnibus con un sistema IoT que se encargue principalmente de controlar la calidad del aire y la cantidad de gente permitida abordo. El fin de este proyecto es poder asegurar al pasajero y al conductor un viaje saludable y comodo.

IoT Project With ESP32C6, Control Heater and Valve using Rulechain, OTA firmware Update Over MQTT Via Thingsboard

An Optimized Arduino MQTT Library for the Thingsboard IoT Platform.

Repositório dedicado a implementações e anotações sobre a disciplina de Introdução a Internet das Coisas - IMD0902 - UFRN - IMD (INSTITUTO METRÓPOLE DIGITAL)

Example code to push sensor data to ThingsBoard Platform using bme280 sensor and esp32 devkit.

This project makes use of a couple of libraries contained in the lib folder to achieve making a simulated miniaturized door to open automatically and close only when the person that entered has gone past a certain point. This feature ensures that the door does not slam close on someone going through the door. It also takes a log that is sent to …

A basic example of ESP32 with DHT11 or DHT22 sensor connected to ThingsBoard

IoT - Configurable thermostat using ESP8266 (ESP01 or NodeMCU 1.0 ESP-12E), DHT (11 or 22) and ThingsBoard as server.

Arduino libarary to connect with ThingsBoard IoT Platform

Kominfo x Indobot Academy | Final Project #2 | Apprenticeship

Battery powered IoT device that reports outdoor sound levels to ThingsBoard IoT Platform via WiFi

millisec UTC time stamp generator by GPS 1PPS decipline for ESP32

An example for sending data to ThingsBoard Live Demo

IoT - Configurable humidifier using ESP8266 (ESP01 or NodeMCU 1.0 ESP-12E), DHT (11 or 22), ultrasonic atomizer and ThingsBoard as server.

🚪 Lorapertura ⛅ IOT device in the things network for door status and weather station

Kominfo x Indobot Academy | Final Project #1 | Apprenticeship