Omakade 1.16.2

• The in-game guide works on Omarchy 4.0 stable releases. It needed a shell
  surface that only newer Omarchy builds have, so on stable the guide did not load.

Omakade 1.16.1

• The in-game guide's Record clip action now uses its own recorder. A screen recording you
  start from Omarchy keeps running on its own: the guide no longer shows it as its
  clip or stops it, and Omarchy's stop leaves the guide's clip alone.
• The in-game guide shows GPU load and temperature on NVIDIA cards too.
• Controller navigation is fixed across the app. A press could move two steps, which made
  some buttons and Settings sections hard or impossible to reach. Every screen is now
  tested from every control in every direction, in couch and desktop layouts.
• Home: the top buttons stay on one row, Down moves straight between shelves, and X adds
  a game to Up next. Going back up to the top buttons shows the top of the page.
• Settings: Back from Settings opened on Home returns to Home. Sliders change only with
  Left and Right, dropdowns no longer trap the controller, and Left from a page goes to
  the section list.
• With Steam running, each controller press counted twice, because Steam Input adds a
  copy of the pad. B in Settings on Home went past Home to the library. Omakade now
  ignores Steam's copy while the real pad is connected.
• In Game Mode, DESKTOP on Home goes straight to the desktop, as holding Home does.

Install Omakade

Omakade 1.16.0

Press Home or Super + Ctrl + G over a running game to open the in-game guide, a
panel at the edge of the screen in your Omarchy theme. The game pauses while it is
open. Resume, take a screenshot or record a clip, change the volume or sound output,
check performance, or quit the game.

• Desktop (in Game Mode) takes you to the desktop with the game hidden and muted.
  Press Home to come back to the game, paused, with the guide open.
• Hold Home for half a second to go to the desktop and back without the guide, as
  Home did in 1.15.
• RetroArch started by Omakade: Home opens only the guide. Click both sticks
  (L3 + R3) for RetroArch's own menu. Your retroarch.cfg is left as it was.
• The press that closes the guide never reaches the game.
• Game Mode opens straight onto its own workspace at full size, and the library
  stays behind your game.
• Prefer the old Home button? Set Home button in games to Game Mode in
  Settings. The guide comes with the package; omarchy plugin disable omakade.guide turns it off.

Fixes

• Sunshine apps exported by Omakade launch from Moonlight again.
• Heroic libraries with an empty Epic or Amazon cache no longer block GOG imports.
• OmaStore installs record playtime.
• x86_64 packages are built against Omarchy stable, so they start on stable, RC and edge.

Install Omakade ·
Guide documentation

Omakade 1.15.0

Press the Xbox, PlayStation or Home button to start Game Mode, return to the desktop
and resume.

• New Controller Home button setting in Settings → Controls, off by default. A short
  press on any controller does what Super + Ctrl + G does, from inside a game or with
  Omakade closed.
• It runs as an optional user service, omakade-guide-button, that only reads
  controllers. Nothing is grabbed, remapped or emulated, and Steam Input keeps working.
• Long holds, chords with other buttons or triggers, the press that switches a
  controller on and duplicate reports from Steam Input's pad are ignored. Presses while the screen is
  locked are ignored.
• With Steam open, turn off "Guide button focuses Steam" and "Enable Guide Button
  Chords for controllers" in Steam's controller settings.

Install Omakade ·
Game Mode guide

Omakade 1.14.2

Game Mode remembers your place. Return to the desktop, then resume your library
or running game with the same shortcut.

• Super + Ctrl + G returns to the desktop and resumes the complete Game Mode session,
  with or without a game. Details, selection, focus and scroll stay in place until
  End Game Mode, Stop Games and Leave, or closing Omakade.
• Running games stay on their workspace with attributable game audio muted while away.
  A game ending releases its game/audio records and keeps the library session available.
• Prepare the Game Mode layout and fullscreen state before showing the window,
  avoiding the windowed-to-fullscreen flash when entering or resuming.
• Keep Resume available during background session checks and prevent late focus
  requests from pulling you away from the restored desktop.
• Restore the desktop even when game audio recovery fails, retaining the recovery
  record for a retry.

Install Omakade ·
Game Mode guide

Omakade 1.14.1

Fixes the Game Mode shortcut leaving a new Omakade window on your desktop.
When the shortcut launches Omakade, pressing it again leaves Game Mode and closes
Omakade after restoring the desktop. An already-open window stays open in its
previous layout.

Install Omakade ·
Game Mode guide

Omakade 1.14.0

Game Mode brings Omakade to the couch. Choose a display and sound output, then
start from Settings or omakade --game-mode. Omakade opens fullscreen, silences
notifications and keeps the screen awake. Leaving restores the settings it changed.

• Add Super + Ctrl + G from Settings with one click. The same key leaves Game Mode,
  or opens the Game Mode controls over a game that is still running.
• Return Omakade to the exact spot it held in a tiled layout.
• Return to your library, leave games running, or confirm Stop Games and Leave. A game
  left running comes back to your desktop.
• Keep controls responsive with large libraries and when an emulator hangs.
• Recover session settings after an unexpected exit.
• Find setup instructions in the shorter README and new feature guide.
• Sort installed games first, then alphabetically, and dim uninstalled covers in
  desktop and Couch Mode. Other sort choices remain available.
• Import owned Epic, GOG and Amazon games from Heroic, including uninstalled
  titles. Heroic handles installation and launch; refresh its libraries before rescanning.
• Keep ROM filename details accessible when metadata and descriptions are missing.
• Add layer-shell-qt as a required dependency for the in-game overlay and
  declare libpulse as optional for Game Mode sound switching.
• Show wide box art whole on the details page, name consoles in full, and keep
  setup hints and playtime bookkeeping off the TV.

Game Mode switches desktop audio as a whole. Gamescope, HDR and per-game audio
routing are outside this release.

Install Omakade ·
Game Mode guide

Omakade 1.13.0

Clearer browsing, library repair and save relocation, with controller and keyboard
navigation checks built into the test suite.

• Rework Home, Library, Details and Settings layouts. Keep actions reachable in
  narrow windows, theme native controls, and use shared spacing and the Omarchy font.
• Make Couch navigation follow the visible rows. Up and Down reach adjacent toolbar
  rows, including wrapped filters, and return between games and their entry control.
  Search, Filters and Details restore focus when closed. Tab and Shift+Tab follow
  the visible controls and games.
• Give keyboard and controller input usable focus on a cold launch, including
  empty and delayed libraries. Opening Omakade no longer needs a mouse click first.
  Clear Filters also clears search stored in the library model.
• Add five navigation contracts covering 4,320 directional links and 16 cold-start
  cases to normal CI. Check keyboard, D-pad and analog input through production
  controller polling, both Couch layouts, empty results and wrapped rows.
• Match Nintendo controller actions to their button prompts. Show Stop Game only
  for attributable running targets and repair focus when actions change.
• Improve Stats Overview, Play patterns and Library snapshot, with clearer labels
  for recorded periods and imported lifetime totals.
• Clarify repair, artwork, launch setup and save actions. Evaluate library review
  availability in the background and keep review and undo controls navigable.
  Recheck superseded background work, group disconnected folders correctly, and
  keep relocation dialog focus inside its visible controls. Removing a search
  chip clears Couch searches too; relocation accepts real filenames containing #.
• Copy verified save backups when relocating a game's path. Preserve the original
  backups and copies on undo, reuse existing verified copies on repeated repairs,
  and refuse destination conflicts, incomplete recovery or unverified save mappings.
• Fix Home shelf scrolling and a cached-artwork geometry binding loop.

Omakade 1.12.0

Play history and local statistics, safer game stopping, durable recording, and new Nintendo DS,
PlayStation 3, and PSP sources.

Play history and statistics

• Open Stats for recorded play, top games, hourly patterns, streaks, achievements,
  and backlog habits. Export a local PNG card with the recording period clearly labelled.
  Imported lifetime totals stay separate. Desktop and Couch Mode are supported.
• See running sessions on Home, browse older history, and delete finished sessions
  with confirmation. Deletion preserves imported playtime and later recorded play.
• Stop one game or all attributable games. Previews explain shared Wine/Flatpak scopes;
  idle installations and documents open in editors are excluded. Recognize Steam Proton
  games whose process paths use Steam's container drive, and stop their verified prefix
  processes when no system wineserver is installed. Wait briefly for a forced process to
  exit before reporting the result.
• Record supported file-picker loads on Hyprland. Optionally pause recording when the
  emulator loses focus, or show the current game through Discord Rich Presence.
• Fix imported/recorded playtime overlap, recovery timestamps, stale title matching,
  Discord reconnects, and partial history deletion on storage failure.
• Keep Stats totals and charts consistent across midnight, New Year and DST. Paused
  historical sessions use labelled timing estimates. Storage errors prevent card export.
• Remember the selected Stats period, count linked installations consistently, and fit
  longer notes inside the exported card. Headless demo exports require an explicit fixture flag.

Recording reliability and emulator support

• Make refused session writes durable. Sessions get a stable identity before their first
  write, and an insert, close or active-session checkpoint the database refuses is journaled
  to a bounded file beside the database and replayed, both after a recorder restart and
  during ordinary polling. Replay is idempotent, so a crash between the database commit and
  the journal acknowledgment cannot double a session. A torn final append keeps the verified
  prefix, and a partial header is repaired rather than swallowing the next record. A replayed
  checkpoint keeps its observation time as the heartbeat and never lowers recorded progress.
  A game-wide clear, a single-session deletion and a database restore each invalidate only the
  records they should, checked in the same transaction as the write, and a temporary database
  read failure retries instead of discarding. An unresolved identity remains retryable under
  a durable journal-owner binding, while Replace restore invalidates and removes prior
  journal work. A recovered session whose game has exited or changed is closed at the last
  observation, and a surviving same-game process is adopted under one stable key. A failed
  final close remains retryable, and checkpoint replacement reports write, flush, sync,
  rename and directory-persistence failures instead of a false acknowledgement. Repeated
  checkpoints replace rather than fill the journal, and a full or damaged journal is shown in
  recorder status instead of dropping accepted records. This replaces the earlier in-memory
  retry limitation.

• Preserve artwork when a Steam app has no published capsule. Metadata keys with their embedded
  source/runner/app-id separators are now decoded losslessly when the library reopens, and a
  Steam preload whose capsule request fails falls back to its identified IGDB cover. A real
  Steam capsule still takes priority whenever one exists.

• Attribute a game Dolphin loaded from its own file picker. Dolphin rewrites a playtime file
  while emulation runs, keyed by disc id, so it is read for a live Dolphin process and a game
  whose total has advanced is recorded against the right game. A total that has not advanced
  attributes nothing, a disc id the library does not know or one that matches two games is
  refused rather than guessed at, and two games advancing between two polls is refused for that
  poll. A record that stops advancing keeps the game it last confirmed instead of ending the
  session, which is what a paused game looks like. A session first attributed from Dolphin's
  window title ends when the record takes over, so the same play is never billed twice. Evidence
  from a command line still wins over the record, and stop actions still use verified command
  line evidence only. No other supported emulator writes a record that proves the loaded game,
  so their file-picker loads keep the window-title path.

• Add native melonDS discovery, launching, recording, title-index and save protection for
  Nintendo DS and DSi dumps. Omakade scans the ROM folders the user marked as DS, reads the
  same game-code and header fields melonDS reads, groups the games under a Nintendo DS console
  entry, and launches one ROM as a structured argument. The default battery save beside the ROM
  and a SaveFilePath override from melonDS.toml are protected as a shared ROM-folder save
  set; save states and relocated <state>.sav files are not treated as in-game saves. The
  native source was accepted with the MIT-licensed DS-Craft beta 1.7.1 homebrew release under
  melonDS 1.1. The Flatpak route launched the same homebrew and closed one 14-second session.
  melonDS still has no current-session evidence for a game loaded inside its own picker.

• Add RPCS3 discovery, PS3 grouping, launching, recording profile, title-index support and
  PARAM.SFO-aware per-title save resolution. Omakade reads games.yml, installed
  dev_hdd0/game directories, the vfs.yml auto-detection folder and explicit PS3 ROM
  folders, validates categories rather than importing updates or save data, and uses the
  verified rpcs3 --no-gui <path>/Flatpak argv. The save resolver reads each candidate save
  directory's PARAM.SFO instead of trusting a title-id prefix. Native execution was accepted
  after installing supplied PS3 firmware 4.93 in the isolated RPCS3 root: the GPL-2.0 iPSX3
  homebrew booted as IPSX30001 and closed one 79-second session.

• Add PPSSPP discovery, PSP grouping, launching, recording and save protection. Omakade reads
  PARAM.SFO from ISO and PBP images, derives DISC_ID, DISC_VERSION and region, accepts
  homebrew ELF entries with a stable path identity, and scans explicit PSP folders plus the
  bounded Recent and PinnedPaths entries in ppsspp.ini. The native source was accepted with
  the MIT-licensed 2048PSP release under PPSSPP 1.20.4 and closed one 59-second session over a
  60-second wall span. A real-title run with God of War: Ghost of Sparta (NPUG80508) under
  PPSSPP 1.20.4 closed one 79-second attributed session. Save protection selects only
  PSP/SAVEDATA folders prefixed by the disc ID, keeps the shared-container warning, and never
  treats PPSSPP_STATE files as game saves.

• Read PCSX2's live logs/emulog.txt to identify the serial of the game actually loaded, including
  titles started inside PCSX2's own file picker. The adapter tracks appended data, handles log
  truncation and disc changes, keeps the last confirmed game while the log is quiet, and refuses
  an unknown serial instead of falling back to the previous game. A real Black (USA) run
  identified SLUS-21376 and closed one 75-second attributed session. Recorder Settings now
  states which sources have verified live-game evidence and which remain command-line/title only.

• Persist observed activity intervals for each session, including pause spans, through the
  database and the durable recovery journal. Existing sessions retain aggregate provenance; new
  interval-backed sessions are marked observed. The existing proportional Stats allocator is
  intentionally unchanged in 1.12.

Omakade 1.10.0

Xenia (Xbox 360) support and a TV setup for the couch.

• Xbox 360 games from Xenia Canary: discovery from Xenia's recent-games list and storage
  root, save backup, playtime recording, and launching through the xenia_canary binary.
  Thanks to @Salt-555 for the Xenia source work.
• Xbox 360 titles identified with IGDB and shown under their own console card, including
  names Xenia writes with trademark marks.
• Xenia pinned to X11 on Wayland, where its window otherwise stayed grey while audio kept
  playing.
• An optional TV gaming agent skill with a Gamescope launcher that checks the TV output,
  workspace, and audio sink before starting a game. It stays inert unless you install it.
  Thanks to @LucasOl1337 for the guide and helper.