How to have what serial writes during autoconnect ?

[davidmarli]

Hi, not really an issue, but I use esp32 with displayscreen.
When I use autoconnect function, I can see in monitor many informations display :
for example :
*wm:AutoConnect
*wm:No wifi saved, skipping
*wm:AutoConnect: FAILED for 1 ms
*wm:StartAP with SSID: AfficheurTEMPO
*wm:AP IP address: 192.168.4.1
*wm:Starting Web Portal

I would like to use this lines and display them on the screen instead of on serial monitor.
How do I do that ?

Thank you.

[B1ackt34]

I use this way

Add libraries

#include <ItemSubMenu.h>
#include <ItemCommand.h>
#include <LcdMenu.h>
#include <MenuScreen.h>
#include <SimpleRotary.h>
#include <display/LiquidCrystal_I2CAdapter.h>
#include <input/SimpleRotaryAdapter.h>
#include <renderer/CharacterDisplayRenderer.h>

And then put this into setup

if(wifiManager.autoConnect("AutoConnectAP")){
      lcd.clear();
      lcd.setCursor(2, 1);
      lcd.print("WiFi connected");
      lcd.setCursor(2, 2);
      lcd.print("IP: ");
      lcd.setCursor(6, 2);
      lcd.print(WiFi.localIP());
      delay(2000);
      lcd.clear();
      }
  else {
      lcd.clear();
      lcd.setCursor(2, 1);
      lcd.print("Configuration");
      lcd.setCursor(2, 2);
      lcd.print("portal is");
      lcd.setCursor(2, 3);
      lcd.print("running");
      delay(2000);
      lcd.clear();
  }