u-connectMatter v3.4.0.260526
Matter end-node reference application from u-blox.
Hardware: u-blox NORA-W36 (Wi-Fi + BLE) over UART via u-connectClient.
Firmware requirement: NORA-W36 u-connectXpress firmware 3.4.0 or newer is required.
Check your module''s version with AT+GMR and update if needed.
Downloads
Windows
| File |
Size (bytes) |
SHA-256 |
u-connect-matter-windows-x64-3.4.0.260526.exe |
7 815 056 |
c2c54e4c65b8cfea6562c266ab3f0094e7c30b9be3ceace43fc38b21ec3a109a |
Raspberry Pi Pico (RP2040)
| File |
Size (bytes) |
SHA-256 |
u-connect-matter-pico-3.4.0.260526.uf2 |
1 303 040 |
15bded68fd67faf6677ccdc1756f5069461ac09af1e26d799cdb4a78e067b2a1 |
u-connect-matter-pico-3.4.0.260526.elf |
7 378 696 |
5790133673af0ebc71433f2995ecceb1b440240e3bb7c92f07d4bc0fab21f952 |
STM32H743 (Cortex-M7, 480 MHz, 1 MB RAM, 2 MB flash)
| File |
Size (bytes) |
SHA-256 |
u-connect-matter-stm32-h743-3.4.0.260526.bin |
920 836 |
3d5e722c61414e7603af3af3cdd83ba3dda89cd1ef9013aec4018ca5822e6f68 |
u-connect-matter-stm32-h743-3.4.0.260526.hex |
2 590 096 |
4f9fd164a566b2db7b243628a4a68ad997849fc2b17517f60de4ff34e813a36c |
u-connect-matter-stm32-h743-3.4.0.260526.elf |
8 333 200 |
6d8e2ae508087a8873d7fe7532eb2593bb473bf2c6bcaa94c27f55e67932fd63 |
STM32F407 (Cortex-M4, 168 MHz, 192 KB RAM, 1 MB flash)
| File |
Size (bytes) |
SHA-256 |
u-connect-matter-stm32-f407-3.4.0.260526.bin |
735 984 |
49ceed5c52d83ac184f2ccc9e0bd5fddd218d2fffebc10e1c6adf6bcae07efdd |
u-connect-matter-stm32-f407-3.4.0.260526.hex |
2 070 060 |
444c94c5cae17517658a66f7e1ac287f326a645909da88371acaa4e6728c7ce3 |
u-connect-matter-stm32-f407-3.4.0.260526.elf |
7 229 912 |
083ce4c4f388b17746504b94a26843c985b0c0f4ce667ea5c8d65b2f8269a860 |
Linux x86_64 (Ubuntu 22.04+, Raspberry Pi OS 64-bit)
| File |
Size (bytes) |
SHA-256 |
u-connect-matter-linux-x86_64-3.4.0.260526 |
1 283 584 |
676644e77d908d373693f65cbff895450ab6c9244e01d467c81f24535a7a5475 |
Quick start
- Windows: download and run
u-connect-matter-windows-x64-3.4.0.260526.exe
- Pico: drag
u-connect-matter-pico-3.4.0.260526.uf2 onto the RPI-RP2 drive
- STM32H743: flash
u-connect-matter-stm32-h743-3.4.0.260526.bin (recommended embedded target)
- STM32F407: flash
u-connect-matter-stm32-f407-3.4.0.260526.bin (minimal config, fits in 192 KB RAM)
- Linux x86_64:
chmod +x u-connect-matter-linux-x86_64-3.4.0.260526 && ./u-connect-matter-linux-x86_64-3.4.0.260526
See the README for full setup instructions.
What''s new in 3.4.0
- Requires NORA-W36 u-connectXpress firmware 3.4.0+ (platform mDNS via AT+UMD* commands)
- Multi-endpoint Matter device: Lighting, Door Lock, Temperature Sensor, Occupancy Sensor
- BLE commissioning via NORA-W36 BLE stack
- OTA firmware update support (Matter BDX protocol + local XMODEM to NORA-W36)
- STM32H743 and STM32F407 embedded targets
- Windows x64 signed executable (u-blox AG certificate)
- Raspberry Pi Pico (RP2040) target
- Linux x86_64 binary (Ubuntu 22.04+, Raspberry Pi OS 64-bit)
Build
Every artifact is built clean (--rebuild) from the same git commit on the private
source repository. SHA-256 values change between releases only when source changes.
