138a:0097 | list_devices failed: Could not activate remote peer 'net.reactivated.Fprint': startup job failed

[Ichigo-Meow]

Hello
Until recently, the sensor was working fine, but now stopped.

At first, the service starts normally.
But after

fprintd-enroll
list_devices failed: Could not activate remote peer ‘net.reactivated.Fprint’: startup job failed

The service crashes

sudo systemctl status python3-validity

python3-validity.service: Scheduled restart job, restart cou>
python3-validity.service: Start request repeated too quickly.
python3-validity.service: Failed with result ‘exit-code’.
Failed to start python-validity driver dbus service.

sudo validity-sensors-firmware

Downloading https://download.lenovo.com/pccbbs/mobiles/nz3gf07w.exe to extract 6_07f_lenovo_mis_qm.xpfwext
Extracting “version 5.3.3542.26 (NZ3GF07W)” - setup data version 5.5.7 (unicode)
 - “code$GetExtractPath$/WBF_Drivers/6_07f_lenovo_mis_qm.xpfwext”
Done.
Found firmware at /tmp/tmpc0pr_za8/code$GetExtractPath$/WBF_Drivers/6_07f_lenovo_mis_qm.xpfwext

sudo python3 /usr/share/python-validity/playground/factory-reset.py

Didn't help.

Perhaps the problems started after updating the system. In addition, I recently had to disassemble my laptop, including disconnecting the fingerprint sensor. Maybe that had an effect? I don't know.
But in lsusb
Bus 001 Device 011: ID 138a:0097 Validity Sensors, Inc.
The sensor is displayed normally, so it's unlikely to be a hardware problem.

What can I do?
Arch Linux
Python 3.14.2
python-validity 0.15-1 from aur

UPD:
I also found this

sudo systemctl status open-fprintd.service

янв 28 09:21:48 archlaptop systemd[1]: Starting Open FPrint Daemon...
янв 28 09:21:48 archlaptop open-fprintd[7596]: Traceback (most recent call last):
янв 28 09:21:48 archlaptop open-fprintd[7596]:   File "/usr/lib/open-fprintd/open-fprintd", line 11>
янв 28 09:21:48 archlaptop open-fprintd[7596]:     from openfprintd.manager import Manager
янв 28 09:21:48 archlaptop open-fprintd[7596]: ModuleNotFoundError: No module named 'openfprintd'
янв 28 09:21:48 archlaptop systemd[1]: open-fprintd.service: Main process exited, code=exited, stat>
янв 28 09:21:48 archlaptop systemd[1]: open-fprintd.service: Failed with result 'exit-code'.
янв 28 09:21:48 archlaptop systemd[1]: Failed to start Open FPrint Daemon.

sudo systemctl status fprintd.service

янв 28 09:15:18 archlaptop systemd[1]: fprintd.service:  Two services allocated for the same bus name net.reactivated.Fprint, refusing operation.
янв 28 09:15:30 archlaptop systemd[1]: fprintd.service:  Two services allocated for the same bus name net.reactivated.Fprint, refusing operation.
янв 28 09:20:59 archlaptop systemd[1]: fprintd.service:  Two services allocated for the same bus name net.reactivated.Fprint, refusing operation.
янв 28 09:21:06 archlaptop systemd[1]: fprintd.service:  Two services allocated for the same bus name net.reactivated.Fprint, refusing operation.

Downgrading libfprint didn't help, nor did the solutions from here