If author is still interested in.. #3
Description
Hi!
Thanks a lot for such a handy tool.
It helped me to find a printing bug source and get a method of control g-code before starting print.
Hopefully, now there will be no more printing failures for unknown reasons.
In my case the bug source was a bad chinese sd-card. When writing to this card, random errors were obtained, which led to repeated printing failures.
Your tool shows all this errors, but it also shows correct g-codes as errors which it can't recognize.
For example:
M104 S240 ; set extruder temp
M140 S75 ; set bed temp
M107 ; start with the fan off
M900 K0 ; force LA off
M109 S240 ; wait for extruder temp
M106 S255 ; fan 100%
M83 ; use relative distances for extrusion
M204 T500 ; set Starting Acceleration
M73 P0 R177 ; Set Print Progress
It would be nice to be able to add user codes to the recognition table.