umbel

Compose Claude Code sessions from named bundles of skills, subagents, hooks, MCP servers, and settings. Switch bundles per claude process; your real ~/.claude/ is never touched.

Status: v0.1.0, beta. Solo-maintained, best-effort. Breaking changes possible while pre-1.0. Issues welcome.

Install

npm i -g @vessux/umbel        # global install — gives you the `umbel` binary
# or
npx -y @vessux/umbel --help   # one-shot via npx

Requires Node ≥ 18.17. Unix only (symlinks).

Note: the npm package is scoped (@vessux/umbel) due to npm's name-similarity filter. The CLI binary is plain umbel, so the rest of these docs use that.

Quickstart

First, get some artifacts on disk (skills, agents, hooks, MCPs) — see Installing artifacts. Then author a bundle at ~/.config/umbel/bundles/data-science.md:

---
name: data-science
description: Tools for data science work
skills: [local/pandas-cheatsheet, local/plotnine]
agents: [local/data-scientist]
mcps: [local/duckdb]
settings:
  model: claude-opus-4-7
---

Every artifact ref is <source>/<leaf> — bare names are rejected. Bundles can also pull in hooks:; see docs/bundles-spec.md for the full schema.

Launch Claude Code with that bundle:

umbel run data-science -- claude

Pin a bundle to a project so plain umbel run uses it:

umbel apply data-science

Installing artifacts

umbel does not fetch artifacts for you — it composes what you already have on disk. Drop skills, agents, hooks, and MCPs into:

~/.config/umbel/skills/<source>/<leaf>/SKILL.md
~/.config/umbel/agents/<source>/<leaf>/AGENT.md
~/.config/umbel/hooks/<source>/<leaf>/HOOK.md
~/.config/umbel/mcps/<source>/<leaf>/MCP.md

<source> is any lowercase identifier you pick — typically the upstream org name (superpowers, obra) or local for hand-authored content. It exists so multiple upstreams with overlapping names can coexist; bundles always reference artifacts as <source>/<leaf>.

Override the root with UMBEL_ARTIFACTS_DIR (default $XDG_CONFIG_HOME/umbel, typically ~/.config/umbel).

General recipe — import a Claude Code plugin repo

Most community plugins are git repos with a skills/<leaf>/SKILL.md layout. Symlink (or copy) each skill into a source-qualified namespace:

# Pick a namespace name — usually the upstream owner.
NS=upstream-name
REPO=/tmp/upstream-repo
git clone https://github.com/<owner>/<repo> "$REPO"

mkdir -p ~/.config/umbel/skills/$NS
ln -sf "$REPO"/skills/*/ ~/.config/umbel/skills/$NS/

Then reference them in a bundle as $NS/<leaf>. Repeat for agents/, hooks/, and mcps/ if the upstream ships them.

Caveat: umbel's HOOK.md / MCP.md frontmatter is umbel-specific (see docs/bundles-spec.md). Skills and agents drop in as-is; hooks and MCPs from upstreams using a different config shape need a small adapter file.

Example: obra/superpowers

git clone https://github.com/obra/superpowers /tmp/superpowers
mkdir -p ~/.config/umbel/skills/superpowers
ln -sf /tmp/superpowers/skills/*/ ~/.config/umbel/skills/superpowers/

Then in a bundle:

skills: [superpowers/brainstorming, superpowers/test-driven-development]

Why

Claude Code reads from one ~/.claude/ per user. Editing it to swap skill / subagent / MCP setups between projects is friction. umbel lets you keep many named bundles and pick one per claude process via --plugin-dir, --settings, and --mcp-config. The bundle is compiled to a Claude Code plugin layout in a cache dir on demand; your real ~/.claude/ stays untouched.

See docs/bundles-spec.md for the full design.

What's isolated, what leaks

A bundle session does not see your everyday Claude Code skills, agents, or plugins from ~/.claude/. Some surfaces still pass through, by design or by quirk:

Surface	Visible under a bundle?	How to control it
~/.claude/skills, agents, plugins	No — fully isolated	Nothing to do; --plugin-dir + --settings replace user-scope sources.
~/.claude/ oauth, history, projects state	Yes (shared on purpose)	Keeps you logged in across bundles. Bundles never write here.
<project>/.claude/skills, agents	Yes — baseline leak	Keep the dir empty, or move those skills into a project-scope bundle (see below).
<project>/.mcp.json	No, when bundle defines MCPs	Bundle adds --strict-mcp-config. Set mergeMcp: true to additive-merge.
<project>/.mcp.json	Yes, when bundle has no MCPs	The strict flag is only emitted alongside bundle MCPs.

So if your goal is "don't show me anything other than what this bundle declares", you have to:

1. Author the bundle (user-scope or project-scope — bundles themselves are not the leak).

2. Empty <project>/.claude/skills/ and <project>/.claude/agents/, or move their contents into a project-scope bundle that extends the user one. For example, put project-specific skills under <project>/.claude/skills/local/<leaf>/ and reference them from <project>/.claude/bundles/<name>.md:

   ---
   name: my-project
   extends: [data-science]
   skills: [local/project-specific-skill]
   ---

   extends: composes parent + child via C3 linearization (see docs/bundles-spec.md).

3. Leave mergeMcp unset (default false) so <project>/.mcp.json stays hidden when the bundle defines MCPs.

Run umbel show <name> before launching to see the resolved manifest plus the project-vs-bundle MCP diff.

Verbs

umbel list                              # scope-grouped bundle table
umbel show [name]                       # resolved manifest + sources + MCP diff
umbel build [name] [--no-cache]         # warm cache, print path
umbel apply [name] [--vanilla]          # pin <project>/.umbel-bundle (--vanilla = pin "no bundle")
umbel unpin                             # remove the pin
umbel run [name] [-- ...claude args]    # launch claude (bundle if name/pin, vanilla otherwise)
umbel init                              # multi-step authoring wizard
umbel gc                                # prune cache (keep newest 3 per name)
umbel shim install [--force]            # install ~/.local/share/umbel/bin/claude (the PATH shim)
umbel shim uninstall                    # remove the shim
umbel shim path                         # print the shim's absolute path
umbel skills [options]                  # low-level skill installer (v0 picker)

When invoked without [name] on a TTY, run / apply / show / build open a single-select picker. For run and apply the picker prepends a (vanilla) row meaning "no bundle, plain claude." Pinned bundle (or vanilla pin) is pre-selected.

PATH shim (recommended)

Install the shim once so plain claude resolves through umbel and discovers the project's bundle automatically. The shim short-circuits to the real claude binary when umbel has already resolved the launch (so subprocess shellouts to claude don't re-prompt):

umbel shim install                       # writes ~/.local/share/umbel/bin/claude
# then add to ~/.zshrc or ~/.bashrc:
export PATH="$HOME/.local/share/umbel/bin:$PATH"

After that, plain claude in a project with a .umbel-bundle pin runs under that bundle. In a project without a pin, the shim shows the picker so you can choose a bundle for that session or pick (vanilla) to run plain claude. Non-interactive shells fall back to vanilla automatically.

To opt out of all umbel routing for one invocation, call claude by its absolute path, or temporarily unset PATH's shim entry.

Pin file

<project>/.umbel-bundle is plain text, one line:

• a bundle name → run under that bundle;
• __vanilla__ → run plain claude with no bundle, no picker;
• absent → picker on TTY, vanilla on non-TTY.

umbel apply <name> writes a bundle pin. umbel apply --vanilla writes the vanilla pin. umbel unpin removes the file. Commit it to share a default with your team, or .gitignore it for per-developer setup.

Bundle resolution order for run

1. Explicit <name> arg
2. UMBEL_BUNDLE env var (set to __vanilla__ to force vanilla)
3. <project>/.umbel-bundle pin file (name or __vanilla__)
4. On TTY → picker with (vanilla) row; on non-TTY → silent vanilla.

Skills picker (low-level, v0)

The original v0 entry point. Symlinks handpicked skills from $UMBEL_ARTIFACTS_DIR/skills/ into a project's .claude/skills/. Useful for sandbox image builds and CI idempotency checks. Mostly subsumed by bundles — keep using it if it fits your workflow.

# Interactive, from a Claude Code project root
umbel skills

# Deterministic install for a sandbox image build
umbel skills --target ./skills --skills tdd,grill-me,review

# CI-safe idempotency check
umbel skills --target .claude/skills --skills tdd,review --dry-run

# Replace a stray real dir left over from a manual copy
umbel skills --target .claude/skills --skills tdd --force

Picker flags

Flag	Meaning
--target <path>	Exact parent dir for skill symlinks
--source <path>	Override source root (default $UMBEL_ARTIFACTS_DIR/skills)
--skills <csv>	Non-interactive selection; implies no prompts
--force	Back up conflicting real dirs/files and replace
--dry-run	Print plan, exit 0, no writes
-h, --help	Usage
-v, --version	Version

Picker row states

Rows start checked iff currently installed correctly.

Icon	Meaning	Default-checked	Toggleable
(none)	Not installed	no	yes
(none)	Installed (correct symlink)	yes	yes (uncheck = remove)
⚠	Symlink → different source	yes	yes (leave = relink)
✖	Real dir/file, not a symlink	no	no (need --force)
?	Malformed SKILL.md	no	yes

Env vars

Var	Effect
UMBEL_ARTIFACTS_DIR	Override artifact root (default: $XDG_CONFIG_HOME/umbel).
UMBEL_DATA_DIR	Override generated-data root, home of the PATH shim (default: $XDG_DATA_HOME/umbel).
UMBEL_CACHE_DIR	Override compiled-bundle cache root (default: $XDG_CACHE_HOME/umbel).
UMBEL_BUNDLE	Used by run resolution (arg > env > pin). __vanilla__ forces vanilla.
UMBEL_RESOLVED	Set by umbel run when spawning claude. The shim short-circuits to vanilla when present, so subprocess shellouts to claude don't re-prompt.
NO_COLOR	Disable ANSI color (icons retained).

Exit codes

Code	Meaning
0	Success (or dry-run completed)
1	Apply / runtime failure
2	Usage error (bad flag, validation error, picker on non-TTY)
3	Source / bundle / parent not found
4	Conflict without --force (skills picker)

Troubleshooting

bundle '<name>': artifact ref(s) missing source qualifier; use '<source>/<leaf>'

The bundle lists a bare ref like tdd. Bundles only accept fully-qualified refs (local/tdd, superpowers/tdd, …). If you have a legacy flat layout under ~/.config/umbel/skills/<leaf>/, move it under a source namespace:

cd ~/.config/umbel/skills
mkdir -p local
# Move every existing leaf into the `local/` namespace
for d in */; do
  [ "$d" = "local/" ] && continue
  mv "$d" local/
done

Then reference each skill as local/<leaf> in your bundles.

bundle '<name>': source(s) not found: skills/<source>/<leaf>

The ref looks right, but the directory does not exist. Check:

• The path resolves under $UMBEL_ARTIFACTS_DIR (default $XDG_CONFIG_HOME/umbel, typically ~/.config/umbel) — echo ${UMBEL_ARTIFACTS_DIR:-$HOME/.config/umbel}.
• The leaf directory contains the expected manifest file (SKILL.md, AGENT.md, HOOK.md, or MCP.md).
• If you symlinked from an upstream repo, the link target is still readable.

bundle '<name>' not found

The CLI cannot find a manifest named <name>.md in either scope. Run umbel list to see the scope-grouped table of bundles umbel can see — user-scope (~/.config/umbel/bundles/) and project-scope (<project>/.claude/bundles/). The same listing also shows the resolved pin (.umbel-bundle) and the UMBEL_BUNDLE env override, so it doubles as a quick "what would umbel run pick?" check.

Contributing

See CONTRIBUTING.md. Solo passive maintenance — PRs and issues welcome, response is best-effort.

License

MIT — see LICENSE.