Impossible connect WLED to my ESP32 WROOM 32 (AZ Delivery)

[SckyzO]

What happened?

Hello everybody
I have a problem when I try to connect my ESP32 WROMM 32 device (https://www.amazon.fr/gp/product/B071P98VTG).
I download the latest version 0.13.1 (ESP32.bin), I flash my ESP correctly without worries, I have the web interface and I configure my WIFI. But once I connect my led strip (for now 20 led to test). I can't do anything.
I connect the 5v on the 5v, DIN/DO is connected on CMD, ok, but then the GND I connect it on the g16 as indicated in the doc, but I lose the wifi. So I don't understand where the problem comes from.
Thank you for your help

To Reproduce Bug

N/A

Expected Behavior

N/A

Install Method

Binary from WLED.me

What version of WLED?

0.13.1

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[Aircoookie]

Hey, please try the connections as follows:
GND - GND (any of the 4 GND pins really, but closer to USB port is better)
DIN - G2 (make sure pin 2 is set as LED pin in LED settings, it should already be the default)
5V - 5V (If you want to connect lots of LEDs later, do not power them from the ESP32)

[SckyzO]

Whaou perfect ! My DIN was on CMD ... :(
It's is working perfectly thank ! I close issue