Repository navigation
Installation
github-actions[bot] edited this page Nov 17, 2026
·
1 revision
There are three ways to install OOS. Read the Disclaimer first, and keep a backup of your original card or its rescue set.
| Way | Opens the scope | Your original card | State |
|---|---|---|---|
| Second card | yes | stays untouched in a drawer | run on a DHO924S |
| USB stick | no | OOS goes on it, beside stock | run on a DHO924S with a modified stock system |
| ADB over the network | no | OOS goes on it, beside stock | run on a DHO924S with a modified stock system |
flowchart TD
start([Install OOS]) --> open{Open the scope?}
open -- yes --> card[Second card: back up, clone, install]
open -- no --> adb{Root ADB on port 55555<br/>and your own build?}
adb -- no --> usb[USB stick with the .GEL file]
adb -- yes --> both[USB stick or ADB]
card --> first[First start]
usb --> first
both --> first
The second card is the safe way: if anything goes wrong, the original card goes back in. Without opening the scope there is no second card to fall back on (read this first).
- Install from a release: the ready-made files of a release and how to check them.
- Install on a second card: backup, clone and install, with the scope open.
- Install without opening the scope: from a USB stick or over ADB.
- Building OOS: build the kernel and the image yourself.
- First start and choosing how OOS starts: what happens next.
This wiki is generated from wiki/ in the repository; propose changes with a pull request.