[pull] master from torvalds:master#594
Merged
pull[bot] merged 208 commits intozaixi:masterfrom Jan 20, 2022
Merged
Conversation
There is no change in behaviour, only some code is moved from pwm_apply_state to a separate function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
If a running PWM is reconfigured to disabled calling the ->config() callback before disabling the hardware might result in a glitch where the (maybe) new period and duty_cycle are visible on the output before disabling the hardware. So handle disabling before calling ->config(). Also exit early in this case which is possible because period and duty_cycle don't matter for disabled PWMs. In return however ->config has to be called even if state->period == pwm->state.period && state->duty_cycle != pwm->state.duty_cycle because setting these might have been skipped in the previous call. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
It is not entirely accurate to go back to the initial state after e.g. .enable() failed, as .config() still modified the hardware, but this same inconsistency exists for drivers that implement .apply(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the modern world implementing .apply(). This just pushes down a slightly optimized variant of how legacy drivers are handled in the core. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the modern world implementing .apply(). This just pushes down a slightly optimized variant of how legacy drivers are handled in the core. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the modern world implementing .apply(). This just pushes down a slightly optimized variant of how legacy drivers are handled in the core. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Currently there are two very similar approaches in use by this driver: img_pwm_config() uses pm_runtime_get_sync() and calls pm_runtime_put_autosuspend() in the error path; img_pwm_enable() calls pm_runtime_resume_and_get() which already puts the reference in its own error path. Align pm_runtime usage and use the same idiom in both locations. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Currently any node whose name starts with the "pwm-" prefix will match this schema and in turn required the "#pwm-cells" property. Avoid this by marking the schema with select: false, therefore only activating the schema when directly included from a PWM controller schema file. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Sparse warns: sparse warnings: (new ones prefixed by >>) >> drivers/vfio/pci/vfio_pci_igd.c:146:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [usertype] val @@ got restricted __le16 [usertype] @@ drivers/vfio/pci/vfio_pci_igd.c:146:21: sparse: expected unsigned short [addressable] [usertype] val drivers/vfio/pci/vfio_pci_igd.c:146:21: sparse: got restricted __le16 [usertype] >> drivers/vfio/pci/vfio_pci_igd.c:161:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [addressable] [usertype] val @@ got restricted __le32 [usertype] @@ drivers/vfio/pci/vfio_pci_igd.c:161:21: sparse: expected unsigned int [addressable] [usertype] val drivers/vfio/pci/vfio_pci_igd.c:161:21: sparse: got restricted __le32 [usertype] drivers/vfio/pci/vfio_pci_igd.c:176:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [usertype] val @@ got restricted __le16 [usertype] @@ drivers/vfio/pci/vfio_pci_igd.c:176:21: sparse: expected unsigned short [addressable] [usertype] val drivers/vfio/pci/vfio_pci_igd.c:176:21: sparse: got restricted __le16 [usertype] These are due to trying to use an unsigned to store the result of a cpu_to_leXX() conversion. These are small variables, so pointer tricks are wasteful and casting just generates different sparse warnings. Store to and copy results from a separate little endian variable. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202111290026.O3vehj03-lkp@intel.com/ Link: https://lore.kernel.org/r/163840226123.138003.7668320168896210328.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Variables allocated by kvzalloc should not be freed by kfree. Because they may be allocated by vmalloc. So we replace kfree with kvfree here. Fixes: d6a4c18 ("vfio iommu: Implementation of ioctl for dirty pages tracking") Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn> Link: https://lore.kernel.org/r/20211212091600.2560-1-billsjc@sjtu.edu.cn Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use look_up_OID to decode OIDs rather than implementing functions. Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
The 'share' parameter is no longer used by smb2_get_name() since commit 265fd19 ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access"). Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Signed-off-by: Steve French <stfrench@microsoft.com>
These fields are remnants of the not upstreamed SMB1 code. Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Signed-off-by: Steve French <stfrench@microsoft.com>
Set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO if netdev has multi tx queues. And add ksmbd_compare_user() to avoid racy condition issue in ksmbd_free_user(). because windows client is simultaneously used to send session setup requests for multichannel connection. Tested-by: Ziwei Xie <zw.xie@high-flyer.cn> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Set ipv4 and ipv6 address in FSCTL_QUERY_NETWORK_INTERFACE_INFO. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
When RSS mode is enable, windows client do simultaneously send several session requests to server. There is racy issue using sess->ntlmssp.cryptkey on N connection : 1 session. So authetication failed using wrong cryptkey on some session. This patch move cryptkey to ksmbd_conn structure to use each cryptkey on connection. Tested-by: Ziwei Xie <zw.xie@high-flyer.cn> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Add the description of @rsp_org in buffer_check_err() kernel-doc comment to remove a warning found by running scripts/kernel-doc, which is caused by using 'make W=1'. fs/ksmbd/smb2pdu.c:4028: warning: Function parameter or member 'rsp_org' not described in 'buffer_check_err' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: cb45172 ("ksmbd: remove smb2_buf_length in smb2_hdr") Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Fix argument list that the kdoc format and script verified in smb2_set_info_file(). The warnings were found by running scripts/kernel-doc, which is caused by using 'make W=1'. fs/ksmbd/smb2pdu.c:5862: warning: Function parameter or member 'req' not described in 'smb2_set_info_file' fs/ksmbd/smb2pdu.c:5862: warning: Excess function parameter 'info_class' description in 'smb2_set_info_file' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 9496e26 ("ksmbd: add request buffer validation in smb2_set_info") Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steve French <stfrench@microsoft.com>
…r_entry() A warning is reported because an invalid argument description, it is found by running scripts/kernel-doc, which is caused by using 'make W=1'. fs/ksmbd/smb2pdu.c:3406: warning: Excess function parameter 'user_ns' description in 'smb2_populate_readdir_entry' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 475d6f9 ("ksmbd: fix translation in smb2_populate_readdir_entry()") Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Remove some warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. fs/ksmbd/smb2pdu.c:623: warning: Function parameter or member 'local_nls' not described in 'smb2_get_name' fs/ksmbd/smb2pdu.c:623: warning: Excess function parameter 'nls_table' description in 'smb2_get_name' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Register ksmbd ib client with ib_register_client() to find the rdma capable network adapter. If ops.get_netdev(Chelsio NICs) is NULL, ksmbd will find it using ib_device_get_by_netdev in old way. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
When SMB Direct is used with iWARP, Windows use 5445 port for smb direct port, 445 port for SMB. This patch check ib_device using ib_client to know if NICs type is iWARP or Infiniband. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Add smb2 max credits parameter to adjust maximum credits value to limit number of outstanding requests. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Moves the credit charge deduction from total_credits under the processing a request. When repeating smb2 lock request and other command request, there will be a problem that ->total_credits does not decrease. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
If the client ignores the CreditResponse received from the server and continues to send the request, ksmbd limits the requests if it exceeds smb2 max credits. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
if CONFIG_LOCKDEP is enabled, the following kernel warning message is generated because rdma_accept() checks whehter the handler_mutex is held by lockdep_assert_held. CM(Connection Manager) holds the mutex before CM handler callback is called. [ 63.211405 ] WARNING: CPU: 1 PID: 345 at drivers/infiniband/core/cma.c:4405 rdma_accept+0x17a/0x350 [ 63.212080 ] RIP: 0010:rdma_accept+0x17a/0x350 ... [ 63.214036 ] Call Trace: [ 63.214098 ] <TASK> [ 63.214185 ] smb_direct_accept_client+0xb4/0x170 [ksmbd] [ 63.214412 ] smb_direct_prepare+0x322/0x8c0 [ksmbd] [ 63.214555 ] ? rcu_read_lock_sched_held+0x3a/0x70 [ 63.214700 ] ksmbd_conn_handler_loop+0x63/0x270 [ksmbd] [ 63.214826 ] ? ksmbd_conn_alive+0x80/0x80 [ksmbd] [ 63.214952 ] kthread+0x171/0x1a0 [ 63.215039 ] ? set_kthread_struct+0x40/0x40 [ 63.215128 ] ret_from_fork+0x22/0x30 To avoid this, move creating a queue pair and accepting a client from transport_ops->prepare() to smb_direct_handle_connect_request(). Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Whenever new parameter is added to smb configuration, It is possible to break the execution of the IPC daemon by mismatch size of request/response. This patch tries to reserve space in ipc request/response in advance to prevent that. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Create a memory region pool because rdma_rw_ctx_init() uses memory registration if memory registration yields better performance than using multiple SGE entries. Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Due to restriction that cannot handle multiple buffer descriptor structures, decrease the maximum read/write size for Windows clients. And set the maximum fragmented receive size in consideration of the receive queue size. Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
When killing ksmbd server after connecting rdma, ksmbd threads does not terminate properly because the rdma connection is still alive. This patch add shutdown operation to disconnect rdma connection while ksmbd threads terminate. Signed-off-by: Yufan Chen <wiz.chen@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Add commonly used structs (>50 instances) which are always or almost always const. Link: https://lkml.kernel.org/r/20211127101134.33101-1-rikard.falkeborn@gmail.com Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extend commit ce81bb2 ("fs/binfmt_elf: use PT_LOAD p_align values for suitable start address") which fixed PIE binaries built with -Wl,-z,max-page-size=0x200000, to cover static PIE binaries. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=215275 Tested by verifying static PIE binaries with -Wl,-z,max-page-size=0x200000 loading. Link: https://lkml.kernel.org/r/20211209174052.370537-1-hjl.tools@gmail.com Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Cc: Chris Kennelly <ckennelly@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: David Rientjes <rientjes@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Fangrui Song <maskray@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pointer sbufs is being assigned a value but it's not being used later
on. The pointer is redundant and can be removed. Cleans up scan-build
static analysis warning:
fs/nilfs2/page.c:203:8: warning: Although the value stored to 'sbufs'
is used in the enclosing expression, the value is never actually read
from 'sbufs' [deadcode.DeadStores]
sbh = sbufs = page_buffers(src);
Link: https://lkml.kernel.org/r/20211211180955.550380-1-colin.i.king@gmail.com
Link: https://lkml.kernel.org/r/1640712476-15136-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Add struct_group() to mark the "info" region (containing struct DInfo and struct DXInfo structs) in struct hfsplus_cat_folder and struct hfsplus_cat_file that are written into directly, so the compiler can correctly reason about the expected size of the writes. "pahole" shows no size nor member offset changes to struct hfsplus_cat_folder nor struct hfsplus_cat_file. "objdump -d" shows no object code changes. Link: https://lkml.kernel.org/r/20211119192851.1046717-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
congestion_wait() in this context is just a sleep - block devices do not support congestion signalling any more. The goal for this wait, which was introduced in commit ae78bf9 ("[PATCH] add -o flush for fat") is to wait for any recently written data to get to storage. We currently have no direct mechanism to do this, so a simple wait that behaves identically to the current congestion_wait() is the best we can do. This is a step towards removing congestion_wait() Link: https://lkml.kernel.org/r/163936544519.22433.13400436295732112065@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Return value directly instead of taking this in a variable. Link: https://lkml.kernel.org/r/20211210023211.424609-1-chi.minghao@zte.com.cn Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cm> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Jan Kara <jack@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce the error detector "warning" to the error_report event and use the error_report_end tracepoint at the end of a warning report. This allows in-kernel tests but also userspace to more easily determine if a warning occurred without polling kernel logs. [akpm@linux-foundation.org: add comma to enum list, per Andy] Link: https://lkml.kernel.org/r/20211115085630.1756817-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: John Ogness <john.ogness@linutronix.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Popov <alex.popov@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The oops id has been added as part of the end of trace marker for the kerneloops.org project. The id is used to automatically identify duplicate submissions of the same report. Identical looking reports with different a id can be considered as the same oops occurred again. The early initialisation of the oops_id can create a warning if the random core is not yet fully initialized. On PREEMPT_RT it is problematic if the id is initialized on demand from non preemptible context. The kernel oops project is not available since 2017. Remove the oops_id and use 0 in the output in case parser rely on it. Link: https://bugs.debian.org/953172 Link: https://lkml.kernel.org/r/Ybdi16aP2NEugWHq@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently delayacct accounts swapin delay only for swapping that cause blkio. If we use zram for swapping, tools/accounting/getdelays can't get any SWAP delay. It's useful to get zram swapin delay information, for example to adjust compress algorithm or /proc/sys/vm/swappiness. Reference to PSI, it accounts any kind of swapping by doing its work in swap_readpage(), no matter whether swapping causes blkio. Let delayacct do the similar work. Link: https://lkml.kernel.org/r/20211112083813.8559-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…able When a task is created after delayacct is enabled, kernel will do all the delay accountings for that task. The problems is if user disables delayacct by set /proc/sys/kernel/task_delayacct to zero, only blkio delay accounting is disabled. Now disable all the kinds of delay accountings when /proc/sys/kernel/task_delayacct sets to zero. Link: https://lkml.kernel.org/r/20211123140342.32962-1-ran.xiaokai@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Flags in struct task_delay_info is used to distinguish the difference between swapin and blkio delay acountings. But after patch "delayacct: support swapin delay accounting for swapping without blkio", there is no need to do that since swapin and blkio delay accounting use their own functions. Link: https://lkml.kernel.org/r/20211124065958.36703-1-yang.yang29@zte.com.cn Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…he and direct compact Add thrashing page cache and direct compact related descriptions and update the usage of getdelays userspace utility. The following patches modifications have been updated: https://lore.kernel.org/all/20190312102002.31737-4-jinpuwang@gmail.com/ https://lore.kernel.org/all/1638619795-71451-1-git-send-email- wang.yong12@zte.com.cn/ Link: https://lkml.kernel.org/r/1639583021-92977-1-git-send-email-wang.yong12@zte.com.cn Signed-off-by: wangyong <wang.yong12@zte.com.cn> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Delay accounting does not track the delay of memory compact. When there
is not enough free memory, tasks can spend a amount of their time
waiting for compact.
To get the impact of tasks in direct memory compact, measure the delay
when allocating memory through memory compact.
Also update tools/accounting/getdelays.c:
/ # ./getdelays_next -di -p 304
print delayacct stats ON
printing IO accounting
PID 304
CPU count real total virtual total delay total delay average
277 780000000 849039485 18877296 0.068ms
IO count delay total delay average
0 0 0ms
SWAP count delay total delay average
0 0 0ms
RECLAIM count delay total delay average
5 11088812685 2217ms
THRASHING count delay total delay average
0 0 0ms
COMPACT count delay total delay average
3 72758 0ms
watch: read=0, write=0, cancelled_write=0
Link: https://lkml.kernel.org/r/1638619795-71451-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Zhang Wenya <zhang.wenya1@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some general debugging features like kmemleak, KASAN, lockdep, UBSAN etc help fix many viruses like a microscope. On the other hand, those features are scatter around and mixed up with more situational debugging options making them difficult to consume properly. This cold help amplify the general debugging/testing efforts and help establish sensitive default values for those options across the broad. This could also help different distros to collaborate on maintaining debug-flavored kernels. The config is based on years' experiences running daily CI inside the largest enterprise Linux distro company to seek regressions on linux-next builds on different bare-metal and virtual platforms. It can be used for example, $ make ARCH=arm64 defconfig debug.config Since KASAN and KCSAN can't be enabled together, we will need to create a separate one for KCSAN later as well. Link: https://lkml.kernel.org/r/20211115134754.7334-1-quic_qiancai@quicinc.com Signed-off-by: Qian Cai <quic_qiancai@quicinc.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: "Stephen Rothwell" <sfr@canb.auug.org.au> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…N_64KB Patch series "Fix CONFIG_TEST_KMOD with 256kB page size". The kernel test robot reported a build error [1] from a failed assertion in fs/btrfs/inode.c with a hexagon randconfig that includes CONFIG_PAGE_SIZE_256KB. This error is the same one that was addressed by commit b05fbcc ("btrfs: disable build on platforms having page size 256K") but CONFIG_TEST_KMOD selects CONFIG_BTRFS without having the "page size less than 256kB dependency", which results in the error reappearing. The first patch introduces CONFIG_PAGE_SIZE_LESS_THAN_256KB by splitting it off from CONFIG_PAGE_SIZE_LESS_THAN_64KB, which was introduced in commit 1f0e290 ("arch: Add generic Kconfig option indicating page size smaller than 64k") for a similar reason in 5.16-rc3. The second patch uses that configuration option for CONFIG_BTRFS to reduce duplication. The third patch resolves the build error by adding CONFIG_PAGE_SIZE_LESS_THAN_256KB as a dependency to CONFIG_TEST_KMOD so that CONFIG_BTRFS does not get enabled under that invalid configuration. [1]: https://lore.kernel.org/r/202111270255.UYOoN5VN-lkp@intel.com/ This patch (of 3): btrfs requires a page size smaller than 256kB. To use that dependency in other places, introduce CONFIG_PAGE_SIZE_LESS_THAN_256KB and reuse that dependency in CONFIG_PAGE_SIZE_LESS_THAN_64KB. Link: https://lkml.kernel.org/r/20211129230141.228085-1-nathan@kernel.org Link: https://lkml.kernel.org/r/20211129230141.228085-2-nathan@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: David Sterba <dsterba@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the newly introduced CONFIG_PAGE_SIZE_LESS_THAN_256KB to describe the dependency introduced by commit b05fbcc ("btrfs: disable build on platforms having page size 256K"). Link: https://lkml.kernel.org/r/20211129230141.228085-3-nathan@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: kernel test robot <lkp@intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b05fbcc ("btrfs: disable build on platforms having page size 256K") disabled btrfs for configurations that used a 256kB page size. However, it did not fully solve the problem because CONFIG_TEST_KMOD selects CONFIG_BTRFS, which does not account for the dependency. This results in a Kconfig warning and the failed BUILD_BUG_ON error returning. WARNING: unmet direct dependencies detected for BTRFS_FS Depends on [n]: BLOCK [=y] && !PPC_256K_PAGES && !PAGE_SIZE_256KB [=y] Selected by [m]: - TEST_KMOD [=m] && RUNTIME_TESTING_MENU [=y] && m && MODULES [=y] && NETDEVICES [=y] && NET_CORE [=y] && INET [=y] && BLOCK [=y] To resolve this, add CONFIG_PAGE_SIZE_LESS_THAN_256KB as a dependency of CONFIG_TEST_KMOD so there is no more invalid configuration or build errors. Link: https://lkml.kernel.org/r/20211129230141.228085-4-nathan@kernel.org Fixes: b05fbcc ("btrfs: disable build on platforms having page size 256K") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Chris Mason <clm@fb.com> Cc: David Sterba <dsterba@suse.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Until recent versions of GCC and Clang, it was not possible to disable KCOV instrumentation via a function attribute. The relevant function attribute was introduced in 540540d ("kcov: add __no_sanitize_coverage to fix noinstr for all architectures"). x86 was the first architecture to want a working noinstr, and at the time no compiler support for the attribute existed yet. Therefore, commit 0f1441b ("objtool: Fix noinstr vs KCOV") introduced the ability to NOP __sanitizer_cov_*() calls in .noinstr.text. However, this doesn't work for other architectures like arm64 and s390 that want a working noinstr per ARCH_WANTS_NO_INSTR. At the time of 0f1441b, we didn't yet have ARCH_WANTS_NO_INSTR, but now we can move the Kconfig dependency checks to the generic KCOV option. KCOV will be available if: - architecture does not care about noinstr, OR - we have objtool support (like on x86), OR - GCC is 12.0 or newer, OR - Clang is 13.0 or newer. Link: https://lkml.kernel.org/r/20211201152604.3984495-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The object-size sanitizer is redundant to -Warray-bounds, and inappropriately performs its checks at run-time when all information needed for the evaluation is available at compile-time, making it quite difficult to use: https://bugzilla.kernel.org/show_bug.cgi?id=214861 With -Warray-bounds almost enabled globally, it doesn't make sense to keep this around. Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Marco Elver <elver@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable ret is being assigned a value that is never read. If the for-loop is entered then ret is immediately re-assigned a new value. If the for-loop is not executed ret is never read. The assignment is redundant and can be removed. Link: https://lkml.kernel.org/r/20211230134557.83633-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ...
…/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
…rnel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This contains a number of nice cleanups and improvements for the core and various drivers, as well as a minor tweak to the json-schema device tree bindings" * tag 'pwm/for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: dt-bindings: pwm: Avoid selecting schema on node name match pwm: img: Use only a single idiom to get a runtime PM reference pwm: vt8500: Implement .apply() callback pwm: img: Implement .apply() callback pwm: twl: Implement .apply() callback pwm: Restore initial state if a legacy callback fails pwm: Prevent a glitch for legacy drivers pwm: Move legacy driver handling into a dedicated function
Pull VFIO updates from Alex Williamson: - Fix sparse endian warnings in IGD code (Alex Williamson) - Balance kvzalloc with kvfree (Jiacheng Shi) * tag 'vfio-v5.17-rc1' of git://github.com/awilliam/linux-vfio: vfio/iommu_type1: replace kfree with kvfree vfio/pci: Resolve sparse endian warnings in IGD support
Pull ksmbd server fixes from Steve French: - authentication fix - RDMA (smbdirect) fixes (including fix for a memory corruption, and some performance improvements) - multiple improvements for multichannel - misc fixes, including crediting (flow control) improvements - cleanup fixes, including some kernel doc fixes * tag '5.17-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: (23 commits) ksmbd: fix guest connection failure with nautilus ksmbd: uninitialized variable in create_socket() ksmbd: smbd: fix missing client's memory region invalidation ksmbd: add smb-direct shutdown ksmbd: smbd: change the default maximum read/write, receive size ksmbd: smbd: create MR pool ksmbd: add reserved room in ipc request/response ksmbd: smbd: call rdma_accept() under CM handler ksmbd: limits exceeding the maximum allowable outstanding requests ksmbd: move credit charge deduction under processing request ksmbd: add support for smb2 max credit parameter ksmbd: set 445 port to smbdirect port by default ksmbd: register ksmbd ib client with ib_register_client() ksmbd: Fix smb2_get_name() kernel-doc comment ksmbd: Delete an invalid argument description in smb2_populate_readdir_entry() ksmbd: Fix smb2_set_info_file() kernel-doc comment ksmbd: Fix buffer_check_err() kernel-doc comment ksmbd: fix multi session connection failure ksmbd: set both ipv4 and ipv6 in FSCTL_QUERY_NETWORK_INTERFACE_INFO ksmbd: set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO ...
Pull ceph updates from Ilya Dryomov: "The highlight is the new mount "device" string syntax implemented by Venky Shankar. It solves some long-standing issues with using different auth entities and/or mounting different CephFS filesystems from the same cluster, remounting and also misleading /proc/mounts contents. The existing syntax of course remains to be maintained. On top of that, there is a couple of fixes for edge cases in quota and a new mount option for turning on unbuffered I/O mode globally instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)" * tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client: ceph: move CEPH_SUPER_MAGIC definition to magic.h ceph: remove redundant Lsx caps check ceph: add new "nopagecache" option ceph: don't check for quotas on MDS stray dirs ceph: drop send metrics debug message rbd: make const pointer spaces a static const array ceph: Fix incorrect statfs report for small quota ceph: mount syntax module parameter doc: document new CephFS mount device syntax ceph: record updated mon_addr on remount ceph: new device mount syntax libceph: rename parse_fsid() to ceph_parse_fsid() and export libceph: generalize addr/ip parsing based on delimiter
pull bot
pushed a commit
that referenced
this pull request
Dec 13, 2024
Deletion of the last rule referencing a given idletimer may happen at the same time as a read of its file in sysfs: | ====================================================== | WARNING: possible circular locking dependency detected | 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted | ------------------------------------------------------ | iptables/3303 is trying to acquire lock: | ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20 | | but task is already holding lock: | ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v] | | which lock already depends on the new lock. A simple reproducer is: | #!/bin/bash | | while true; do | iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | done & | while true; do | cat /sys/class/xt_idletimer/timers/testme >/dev/null | done Avoid this by freeing list_mutex right after deleting the element from the list, then continuing with the teardown. Fixes: 0902b46 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pull bot
pushed a commit
that referenced
this pull request
Dec 19, 2024
With CONFIG_PROVE_LOCKING, when creating a set of type bitmap:ip, adding it to a set of type list:set and populating it from iptables SET target triggers a kernel warning: | WARNING: possible recursive locking detected | 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted | -------------------------------------------- | ping/4018 is trying to acquire lock: | ffff8881094a6848 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set] | | but task is already holding lock: | ffff88811034c048 (&set->lock){+.-.}-{2:2}, at: ip_set_add+0x28c/0x360 [ip_set] This is a false alarm: ipset does not allow nested list:set type, so the loop in list_set_kadd() can never encounter the outer set itself. No other set type supports embedded sets, so this is the only case to consider. To avoid the false report, create a distinct lock class for list:set type ipset locks. Fixes: f830837 ("netfilter: ipset: list:set set type support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )