Hollow Lantern 1.2

Tinesh's Hollow Lantern 1.2 for Skyrim Special Edition and Anniversary Edition: a fix release for the corset.

What changed

• Corset: the cups keep the round shape of the breasts instead of looking flat or square from the side. The
  leather over the tip of each breast was smoothed flat and sat slightly inside the breast; it now rounds over it.
• Corset: on large-breast presets the cups follow the breast sliders, so the breasts no longer push through the
  front of the cups.
• Boots: the leg sliders move the leather along the front and back seams more evenly. With all sliders at zero
  the boots are the same as in 1.1.

Only the corset and the boots' slider data changed: the other items and the recipes are the same as in 1.1. The body
presets are unchanged (still 1.0) and are attached here again for convenience.

Known issue

• Boots: the orange stitching, mostly along the back of the boots, can still look curved on some body presets.

Updating from 1.1

Install the new package over the old one (or replace it in your mod manager), then run Batch Build in
BodySlide again for the group Hollow Lantern (with Build Morphs ticked) so the corset and boots are rebuilt
for your preset. No new game is needed.

Downloads

Install one outfit package. All three contain the same plugin, meshes and BodySlide files; only the texture size
changes. The body presets are optional.

File	Contents
Hollow-Lantern-CBBE-3BA-2K-1.2.7z	Outfit, 2048 px textures
Hollow-Lantern-CBBE-3BA-4K-1.2.7z	Outfit, 4096 px textures
Hollow-Lantern-CBBE-3BA-8K-1.2.7z	Outfit, 8192 px textures
Hollow-Lantern-Body-Presets-CBBE-3BA-1.0.7z	Optional: five CBBE 3BA BodySlide presets (unchanged)

Installation

• Mod Organizer 2: Install a new mod from an archive and pick the package.
• Vortex: drag the package onto the Mods page (or use Install From File), then enable and deploy.
• Manual: extract the package into the game's Data folder.

Then, in BodySlide, pick the group Hollow Lantern and your CBBE 3BA preset, tick Build Morphs and run
Batch Build, and enable [Tinesh] Hollow Lantern.esp. The plugin is ESL-flagged and only adds new records, so its
place in the load order does not matter.

Requirements: Skyrim SE or AE (built and tested on 1.6.1170), CBBE 3BA and BodySlide. Recommended: RaceMenu
(heel height of the boots) and FSMP (tail physics).

Full changelog: CHANGELOG.md.

SHA-256

e1dc18f41c188fc2c11acc65ae0109a879f9b697c1f19bf3d6134de3da138a02  Hollow-Lantern-CBBE-3BA-2K-1.2.7z
7caa6c29f854c7272b3f1ce176a031f8da1cbbdb312c2d89e185ab0cf8c3e91f  Hollow-Lantern-CBBE-3BA-4K-1.2.7z
866faa11fa759e857fed038af8741fbed37b50514d566e020898f3b62adb318b  Hollow-Lantern-CBBE-3BA-8K-1.2.7z
61471e32f76c256057f74a642d3bebf71b02c3354d04d0e3a7ba45c05b0ded52  Hollow-Lantern-Body-Presets-CBBE-3BA-1.0.7z

Credits

Tinesh (design, meshes, textures, plugin and body presets). CBBE by Ousnius, Caliente and Jeir, and CBBE 3BA by Acro
(the body mesh and sliders the corset carries, and the CBBE feet the boots' ankle follows). Bethesda Game Studios
(vanilla effects and textures the items use).

Hollow Lantern 1.1

Tinesh's Hollow Lantern 1.1 for Skyrim Special Edition and Anniversary Edition: a fix release for the boots.

What changed

• Boots: the leg no longer pinches inwards above the ankle. The shaft now runs in one smooth line from the calf
  into the foot, where it used to bend sharply at the third row of eyelets from the bottom.
• Boots: the lacing runs in a straight line all the way down to the instep.
• Boots: the lower boot bends at the ankle, like the leg under it, so the lacing keeps its shape when crouching,
  sitting or walking.
• Boots: BodySlide sliders now reach the whole shaft down to the ankle, not only from the third row of eyelets
  up.
• Boots: the orange stitching along the front seam, above the lacing, runs straight instead of bending at the
  knee.

Only the boots changed: the other items, the recipes and the plugin's records are the same as in 1.0. The body
presets are unchanged (still 1.0) and are attached here again for convenience.

Updating from 1.0

Install the new package over the old one (or replace it in your mod manager), then run Batch Build in
BodySlide again for the group Hollow Lantern (with Build Morphs ticked) so the boots are rebuilt for your
preset. No new game is needed.

Downloads

Install one outfit package. All three contain the same plugin, meshes and BodySlide files; only the texture size
changes. The body presets are optional.

File	Contents
Hollow-Lantern-CBBE-3BA-2K-1.1.7z	Outfit, 2048 px textures
Hollow-Lantern-CBBE-3BA-4K-1.1.7z	Outfit, 4096 px textures
Hollow-Lantern-CBBE-3BA-8K-1.1.7z	Outfit, 8192 px textures
Hollow-Lantern-Body-Presets-CBBE-3BA-1.0.7z	Optional: five CBBE 3BA BodySlide presets (unchanged)

Installation

• Mod Organizer 2: Install a new mod from an archive and pick the package.
• Vortex: drag the package onto the Mods page (or use Install From File), then enable and deploy.
• Manual: extract the package into the game's Data folder.

Then, in BodySlide, pick the group Hollow Lantern and your CBBE 3BA preset, tick Build Morphs and run
Batch Build, and enable [Tinesh] Hollow Lantern.esp. The plugin is ESL-flagged and only adds new records, so its
place in the load order does not matter.

Requirements: Skyrim SE or AE (built and tested on 1.6.1170), CBBE 3BA and BodySlide. Recommended: RaceMenu
(heel height of the boots) and FSMP (tail physics).

Full changelog: CHANGELOG.md.

SHA-256

0776e6bbeb698d03b6ac0223718bcb785484f0effb8de84c9e320ba6434c55c8  Hollow-Lantern-CBBE-3BA-2K-1.1.7z
9c29b6d4a9b3c86ec07b533306d39b0353a4c37e245a31830a5a7520e9d69a98  Hollow-Lantern-CBBE-3BA-4K-1.1.7z
eb04ac6f217ad348e89036fbe34e4c18d78e820eb251637fcba78b05fd34932b  Hollow-Lantern-CBBE-3BA-8K-1.1.7z
61471e32f76c256057f74a642d3bebf71b02c3354d04d0e3a7ba45c05b0ded52  Hollow-Lantern-Body-Presets-CBBE-3BA-1.0.7z

Credits

Tinesh (design, meshes, textures, plugin and body presets). CBBE by Ousnius, Caliente and Jeir, and CBBE 3BA by Acro
(the body mesh and sliders the corset carries, and the CBBE feet the boots' ankle follows). Bethesda Game Studios
(vanilla effects and textures the items use).

Hollow Lantern 1.0

First release of Tinesh's Hollow Lantern for Skyrim Special Edition and Anniversary Edition: an original
Halloween outfit for CBBE 3BA with BodySlide support, a leather masquerade mask, an SMP tail, two enchanted lantern
axes and a carried jack-o'-lantern, plus an optional pack of five body presets.

Downloads

Install one outfit package. All three contain the same plugin, meshes and BodySlide files; only the texture size
changes. The body presets are optional.

File	Contents
Hollow-Lantern-CBBE-3BA-2K-1.0.7z	Outfit, 2048 px textures
Hollow-Lantern-CBBE-3BA-4K-1.0.7z	Outfit, 4096 px textures
Hollow-Lantern-CBBE-3BA-8K-1.0.7z	Outfit, 8192 px textures
Hollow-Lantern-Body-Presets-CBBE-3BA-1.0.7z	Optional: five CBBE 3BA BodySlide presets

Installation

• Mod Organizer 2: Install a new mod from an archive and pick the package.
• Vortex: drag the package onto the Mods page (or use Install From File), then enable and deploy.
• Manual: extract the package into the game's Data folder.

Then, in BodySlide, pick the group Hollow Lantern and your CBBE 3BA preset, tick Build Morphs and run
Batch Build, and enable [Tinesh] Hollow Lantern.esp. The plugin is ESL-flagged and only adds new records, so its
place in the load order does not matter. The body presets have no plugin: install them and pick a preset in BodySlide.

Requirements: Skyrim SE or AE (built and tested on 1.6.1170), CBBE 3BA and BodySlide. Recommended: RaceMenu
(heel height of the boots) and FSMP (tail physics).

Getting the items

Every item is made at any blacksmith forge, with no perk needed. Console: help "hollow lantern" 4, then
player.additem <ID> 1.

Contents

• Corset with attached briefs, shorts, over-knee boots with a Louis heel, opera gloves, choker with a pumpkin charm,
  horns, masquerade mask and a tail with SMP physics.
• Hollow Lantern War Axe (14 damage) and Battleaxe (24 damage) with the Hollow Lantern Ember enchantment: fire
  damage on hit, a burn that does not stack, soul trap, and fear on wounded targets.
• Hollow Lantern: a carved jack-o'-lantern hanging from a cord-wrapped handle, carried like a torch, with a warm light
  that never burns out. Crafting menus cannot list light sources, so the forge makes it as an item that turns into the
  carried light as soon as it reaches your inventory.
• Full changelog: CHANGELOG.md.

SHA-256

0b275814303b05c77089c4f48d6248c8daf9f3e8ea5211ca7ef8b75c906b2b00  Hollow-Lantern-CBBE-3BA-2K-1.0.7z
e8184e3aaa06ddf71fee326df3a0cb7c1eee0671dd2e7a24cbcb165d284c7c12  Hollow-Lantern-CBBE-3BA-4K-1.0.7z
635738e143c1a7b4d2542b3650097790a504245cba16ba771fadc55f9403876f  Hollow-Lantern-CBBE-3BA-8K-1.0.7z
61471e32f76c256057f74a642d3bebf71b02c3354d04d0e3a7ba45c05b0ded52  Hollow-Lantern-Body-Presets-CBBE-3BA-1.0.7z

Credits

Tinesh (design, meshes, textures, plugin and body presets). CBBE by Ousnius, Caliente and Jeir, and CBBE 3BA by Acro
(the body mesh and sliders the corset carries). Bethesda Game Studios (vanilla effects and textures the items use).