wadamesh beta_16
wadamesh beta_16 — Heltec V4 Expansion Kit support, European keyboards, and Wi-Fi updates (with rollback) are back.
Flash or update at https://flasher.wadamesh.com, or grab it on-device under Settings → About if you're on a normally-flashed board.
New
Heltec V4 Expansion Kit · thanks @samuelcoustet (#29)
If you've got the sensor expansion board on a Heltec V4, there's finally a proper home for it: a dedicated Sensors tab (temperature, humidity, pressure, GPS and battery, each with a small history chart), an environment readout on the Home screen, and an on-device mesh console for poking at the radio directly. None of it shows up on a bare V4 — it only appears when a sensor board is actually detected, so nothing changes for everyone else.
Worth being honest about this one: it was a real grind to land. It came in as a big pull request built against an old beta, so getting it in cleanly meant re-doing most of it by hand against current code and carefully gating every piece so it can't bloat or destabilise the T-Deck and Tanmatsu builds. The original work is @samuelcoustet's — thank you.
European keyboards · thanks @samuelcoustet (#29)
French, Dutch, German, Spanish and Italian layouts, both on-screen and on the T-Deck's physical keyboard. Choose one of those as your interface language and the matching layout is selected automatically.
Wi-Fi updates are back — and you can roll back
On a normally-flashed device (not installed through the Launcher), firmware updates over Wi-Fi return: Settings → About, no cable needed. New this round: Install a previous version — pick one of the last few betas and reinstall it over Wi-Fi, with an "are you sure?" first since it's a downgrade.
Fixed · thanks @tun0
- Closing a dialog no longer lets a scroll carry through to the page behind it (#50).
- The contact action sheet no longer overflows the screen in landscape (#49).
- The per-channel region field now shows your default region as the hint, instead of a generic placeholder (#48).
- The status-bar clock no longer overlaps the node name on the V4.
Everything from beta_15 is included. Thanks to @samuelcoustet and @tun0 for the contributions this round.
