Skip to content

prePrepare、prepare and commit

Jump to bottom
Agzs edited this page Oct 11, 2017 · 3 revisions

待完善。。。。。。

事件来源

在serve()函数中提到的NewPeerWithEngine() >> engFactory(peer)<=>GetEngine(peer)中，该函数位于engine.go中，for循环不断通过engine.consensusFan.GetOutChannel()从messageFan中获取msg，然后通过engine.consenter.RecvMsg(msg.Msg, msg.Sender)发送出去,该函数实际上由externalEventReceiver实现。

// RecvMsg is called by the stack when a new message is received
func (eer *externalEventReceiver) RecvMsg(ocMsg *pb.Message, senderHandle *pb.PeerID) error {
	eer.manager.Queue() <- batchMessageEvent{
		msg:    ocMsg,
		sender: senderHandle,
	}
	return nil
}

注意到，该函数是将batchMessageEvent发送到err.manager.Queue()中。

事件处理

  • 在obcBatch初始化时通过goroutine调用managerImpl.eventLoop()，最终会调用obcBatch.ProcessEvent()。
  • 在obcBatch.ProcessEvent()函数中，通过switch et := event.(type) 分支处理events：

1、batchMessageEvent

case batchMessageEvent:
		ocMsg := et
		return op.processMessage(ocMsg.msg, ocMsg.sender)

注意到，该分支会调用obcBatch.processMessage(batchMessageEvent.msg, batchMessageEvent.sender)

func (op *obcBatch) processMessage(ocMsg *pb.Message, senderHandle *pb.PeerID) events.Event {
	if ocMsg.Type == pb.Message_CHAIN_TRANSACTION {
		req := op.txToReq(ocMsg.Payload)
		return op.submitToLeader(req)
	}

	if ocMsg.Type != pb.Message_CONSENSUS {
		logger.Errorf("Unexpected message type: %s", ocMsg.Type)
		return nil
	}

	batchMsg := &BatchMessage{}
	...

	if req := batchMsg.GetRequest(); req != nil {
		...
		if (op.pbft.primary(op.pbft.view) == op.pbft.id) && op.pbft.activeView {
			return op.leaderProcReq(req)
		}
		op.startTimerIfOutstandingRequests()
		return nil
	} else if pbftMsg := batchMsg.GetPbftMessage(); pbftMsg != nil {
		senderID, err := getValidatorID(senderHandle) // who sent this?
		if err != nil {
			panic("Cannot map sender's PeerID to a valid replica ID")
		}
		msg := &Message{}
		err = proto.Unmarshal(pbftMsg, msg)
		if err != nil {
			logger.Errorf("Error unpacking payload from message: %s", err)
			return nil
		}
		return pbftMessageEvent{
			msg:    msg,
			sender: senderID,
		}
	}

	logger.Errorf("Unknown request: %+v", batchMsg)

	return nil
}

注意到：

  • 1.1 消息是Message_CHAIN_TRANSACTION，将消息的payload封装成Request，交由submitToLeader(req)处理，经过广播等操作， submitToLeader(req) >> leaderProcReq(req) >> sendBatch() 最终返回events.Event类型的RequestBatch，这个事件在pbft.ProcessEvent(event)中处理。
  • 1.2 消息是Message_CONSENSUS，进行分支：
    • 1.2.1 req，最终会调用leaderProcReq(req)，后期同Message_CHAIN_TRANSACTION
    • 1.2.2 pbftMsg，经过处理，最终返回pbftMessageEvent，这个事件在pbft.ProcessEvent(event)中处理。

2、default，会执行pbft.ProcessEvent(event)

在该函数中通过switch et := e.(type)进行分支操作：

2.1 pbftMessageEvent

它会执行next, err := instance.recvMsg(msg.msg, msg.sender)，该函数如下：

func (instance *pbftCore) recvMsg(msg *Message, senderID uint64) (interface{}, error) {
	if reqBatch := msg.GetRequestBatch(); reqBatch != nil {
		return reqBatch, nil
	} else if preprep := msg.GetPrePrepare(); preprep != nil {
		if senderID != preprep.ReplicaId {
			return nil, fmt.Errorf("Sender ID included in pre-prepare message (%v) doesn't match ID corresponding to the receiving stream (%v)", preprep.ReplicaId, senderID)
		}
		return preprep, nil
	} else if prep := msg.GetPrepare(); prep != nil {
		if senderID != prep.ReplicaId {
			return nil, fmt.Errorf("Sender ID included in prepare message (%v) doesn't match ID corresponding to the receiving stream (%v)", prep.ReplicaId, senderID)
		}
		return prep, nil
	} else if commit := msg.GetCommit(); commit != nil {
		if senderID != commit.ReplicaId {
			return nil, fmt.Errorf("Sender ID included in commit message (%v) doesn't match ID corresponding to the receiving stream (%v)", commit.ReplicaId, senderID)
		}
		return commit, nil
	} else if chkpt := msg.GetCheckpoint(); chkpt != nil {
		if senderID != chkpt.ReplicaId {
			return nil, fmt.Errorf("Sender ID included in checkpoint message (%v) doesn't match ID corresponding to the receiving stream (%v)", chkpt.ReplicaId, senderID)
		}
		return chkpt, nil
	} else if vc := msg.GetViewChange(); vc != nil {
		if senderID != vc.ReplicaId {
			return nil, fmt.Errorf("Sender ID included in view-change message (%v) doesn't match ID corresponding to the receiving stream (%v)", vc.ReplicaId, senderID)
		}
		return vc, nil
	} else if nv := msg.GetNewView(); nv != nil {
		if senderID != nv.ReplicaId {
			return nil, fmt.Errorf("Sender ID included in new-view message (%v) doesn't match ID corresponding to the receiving stream (%v)", nv.ReplicaId, senderID)
		}
		return nv, nil
	} else if fr := msg.GetFetchRequestBatch(); fr != nil {
		if senderID != fr.ReplicaId {
			return nil, fmt.Errorf("Sender ID included in fetch-request-batch message (%v) doesn't match ID corresponding to the receiving stream (%v)", fr.ReplicaId, senderID)
		}
		return fr, nil
	} else if reqBatch := msg.GetReturnRequestBatch(); reqBatch != nil {
		// it's ok for sender ID and replica ID to differ; we're sending the original request message
		return returnRequestBatchEvent(reqBatch), nil
	}
	return nil, fmt.Errorf("Invalid message: %v", msg)
}

从代码可以看出，该函数返回各种类型的时间，供pbft.ProcessEvent(event)处理。

2.2、RequestBatch

它会执行recvRequestBatch(reqBatch)，进一步调用sendPrePrepare(reqBatch, digest)

func (instance *pbftCore) sendPrePrepare(reqBatch *RequestBatch, digest string) {
	...
	logger.Debugf("Primary %d broadcasting pre-prepare for view=%d/seqNo=%d and digest %s", instance.id, instance.view, n, digest)
	instance.seqNo = n
	preprep := &PrePrepare{
		View:           instance.view,
		SequenceNumber: n,
		BatchDigest:    digest,
		RequestBatch:   reqBatch,
		ReplicaId:      instance.id,
	}
	cert := instance.getCert(instance.view, n)
	cert.prePrepare = preprep
	cert.digest = digest
	instance.persistQSet()
	instance.innerBroadcast(&Message{Payload: &Message_PrePrepare{PrePrepare: preprep}})
	instance.maybeSendCommit(digest, instance.view, n)
}

注意到：

  • 1） 初始化PrePrepare，赋值给cert的成员变量prePrepare(指针赋值)，同时作为innerBroadcast()的参数，广播出去。
  • 2）innerBroadcast()会随机模拟byzantine fault节点，正常节点会进一步调用instance.consumer.broadcast(msgRaw) (该函数由obcBatch实现)，最终调用broadcaster.send()实现广播。
  • 3）调用instance.maybeSendCommit(digest, instance.view, n)，因为if条件不成立，没有进行实质性操作。

2.3、PrePrepare

它会执行recvPrePrepare(prePrepare)

func (instance *pbftCore) recvPrePrepare(preprep *PrePrepare) error {
    ...
    if ... {
		logger.Debugf("Backup %d broadcasting prepare for view=%d/seqNo=%d", instance.id, preprep.View, preprep.SequenceNumber)
		prep := &Prepare{
			View:           preprep.View,
			SequenceNumber: preprep.SequenceNumber,
			BatchDigest:    preprep.BatchDigest,
			ReplicaId:      instance.id,
		}
		cert.sentPrepare = true
		instance.persistQSet()
		instance.recvPrepare(prep)
		return instance.innerBroadcast(&Message{Payload: &Message_Prepare{Prepare: prep}})
	}

	return nil
}

从函数可看出：

  • 1）初始化Prepare，并作为recvPrepare()和innerBroadcast()的参数。
  • 2）recvPrepare()对prepare进行验证，调用instance.maybeSendCommit(prep.BatchDigest, prep.View, prep.SequenceNumber)，在Prepare中介绍。
  • 3）innerBroadcast()同2.1（2）

2.4、Prepare

它会执行instance.recvPrepare(prepare),调用instance.maybeSendCommit(prep.BatchDigest, prep.View, prep.SequenceNumber)

func (instance *pbftCore) maybeSendCommit(digest string, v uint64, n uint64) error {
	cert := instance.getCert(v, n)
	if instance.prepared(digest, v, n) && !cert.sentCommit {
		logger.Debugf("Replica %d broadcasting commit for view=%d/seqNo=%d",
			instance.id, v, n)
		commit := &Commit{
			View:           v,
			SequenceNumber: n,
			BatchDigest:    digest,
			ReplicaId:      instance.id,
		}
		cert.sentCommit = true
		instance.recvCommit(commit)
		return instance.innerBroadcast(&Message{&Message_Commit{commit}})
	}
	return nil
}

注意到，在RequestBatch虽然有被调用，但是因为条件不成立，所以无法进入if分支。在接收到prePrepare和prepare后，条件成立，进入if分支。

  • 1）初始化commit，且仅同一个prepare只初始化一次。
  • 2）调用instance.recvCommit(commit)，在Commit中讲解。
  • 3）innerBroadcast()同2.1（2）

2.5、Commit

它会执行instance.recvCommit(commit)，进一步调用instance.committed(commit.BatchDigest, commit.View, commit.SequenceNumber)

func (instance *pbftCore) committed(digest string, v uint64, n uint64) bool {
	if !instance.prepared(digest, v, n) {
		return false
	}

	quorum := 0
	cert := instance.certStore[msgID{v, n}]
	if cert == nil {
		return false
	}

	for _, p := range cert.commit {
		if p.View == v && p.SequenceNumber == n {
			quorum++
		}
	}

	logger.Debugf("Replica %d commit count for view=%d/seqNo=%d: %d",
		instance.id, v, n, quorum)

	return quorum >= instance.intersectionQuorum()
}

func (instance *pbftCore) intersectionQuorum() int {
	return (instance.N + instance.f + 2) / 2
}

从代码可以看出，通过cert中保存的commit判定最终是否committed。cert的结构如下：

ype msgCert struct {
	digest      string
	prePrepare  *PrePrepare
	sentPrepare bool
	prepare     []*Prepare
	sentCommit  bool
	commit      []*Commit
}

committed的后续操作尚未研究

Home

文档说明

fabric-ca整体结构

fabric v1.0整体结构

fabric v0.6整体结构

fabric协议规范

代码注释

fabric-ca/api/client.go

fabric v0.6

fabric v0.6 startup

fabric v0.6 实际入口serve()函数

接口与实现

prePrepare、prepare-and-commit

PBFT共识模块

Event

拜占庭共识

go笔记

Go & JSON

Comma-ok断言

go项目包管理

Environment

golang 安装使用 protobuf

Clone this wiki locally