Repository navigation
EN Secure Boot
Aleps31 edited this page Nov 11, 2026
·
1 revision
Maginat starts with Secure Boot on: it uses shim and GRUB signed by Ubuntu 24.04 and a kernel signed with the Maginat key. Because the key is not in PC firmware, it must be enrolled once per computer. It stays in the firmware and also applies to the installed system.
- Boot the ISO. A message explains what is going on, then a blue screen (MokManager) appears: press a key within 10 seconds.
- Choose Enroll key from disk, select
maginat-sb.cer, then Continue, Yes, Reboot. - Boot the ISO again: it now starts normally.
- try Maginat in a virtual machine;
- turn Secure Boot off in the firmware settings.
If the PC uses Windows BitLocker or device encryption, changing Secure Boot settings can make Windows ask for the recovery key at its next start. Keep it at hand, or choose key enrollment (the first option) without touching the settings.
The kernel runs in lockdown mode. As a result:
- unsigned modules do not load (for example proprietary NVIDIA drivers or VirtualBox host modules);
- hibernation is not available.
A portable USB stick with Secure Boot also needs the key to be enrolled on each computer you use it on.