Repository navigation
EN Download
Aleps31 edited this page Nov 11, 2026
·
1 revision
| Minimum | Recommended | |
|---|---|---|
| Processor | x86-64-v2 (about 2009 or newer) | any recent PC |
| RAM | 2 GB | 4 GB |
| Disk to install on | 20 GB | 40 GB or more |
| USB stick | 4 GB | – |
It works with both BIOS and UEFI (also with Secure Boot, see Secure Boot).
From the Releases page download:
| File | What it is for |
|---|---|
maginat-0.1.3.iso |
live session and installer (about 1.4 GB) |
SHA256SUMS |
checksums to verify the ISO |
maginat-0.1.3-sources.tar |
sources of new or changed packages and the kernel configuration |
maginat-sviluppo-0.1.3.tar.xz |
development tools, downloaded by the Store: you do not need to download it by hand and it must not be renamed |
Put maginat-0.1.3.iso and SHA256SUMS in the same folder and run:
sha256sum -c SHA256SUMS
It must print OK. If it prints FAILED, download the file again.
You need a tool that writes the ISO as it is (not one that just copies the file):
- Linux:
sudo dd if=maginat-0.1.3.iso of=/dev/sdX bs=4M status=progress conv=fsync(replacesdXwith your stick, checking withlsblk: picking the wrong disk erases its data) - Windows and macOS: balenaEtcher; with Rufus choose DD Image mode
The USB stick is erased.
Boot from the stick (usually F12, F10, Esc or F2 at power-on, depending on the PC). The user is utente and the password is maginat: it is only needed to unlock the screen. The language (Italian, English, Spanish) is chosen on the first screen.
Boot menu:
- Maginat 0.1.3: normal start
-
With persistence: keeps your files on the stick (
sudo maginat-persistenza) - Safe graphics: for screens that stay black
- Compatibility: extra options for old or unusual hardware
- Firmware settings: opens the UEFI setup (UEFI only)
With Secure Boot on, the first time you must enroll the key: see Secure Boot.