Repository navigation
1.0 AmigaPCI Hardware Guide
Jason Neus edited this page Nov 4, 2026
·
15 revisions
Add some comments here.
TBD
TBD
TBD
TBD
TBD
An Amiga OCS or ECS chipset is necessary for the AmigaPCI to function. The required chips are listed in Table 1.3.1.
| Common Name | Designation/Part Number | Postion | Package | Notes |
|---|---|---|---|---|
| Fat Agnus | See Table 2 | U202 | PLCC-84 | |
| Paula | MOS 8364 | U500 | DIP-48 | |
| Denise | MOS 8362 or CSG 8373 | U300 | DIP-48 | Deniser |
| CIA | MOS 8520A, 8520A-1, 8520R2, or 8520PD | U203 and U204 | DIP-40 | These are all interchangeable. |
| Kickstart | Burn your own A1200 27C4096 | U210 (LOW), U211 (HIGH) | DIP-40 | Do not use Commodore Kickstart ROMs. |
Note
Commodore IC's may be marked "MOS" or "CSG", or possibly neither in the case of contract runs. These are interchangeable by part number.
| Agnus | Commodore Part Number | Status |
|---|---|---|
| 8372A | ALL | Tested and working |
| 8375 | 390544-01 | Tested and working |
| 8375 | 390544-02 | Tested and working |
| 8375 | 318069-10 | Tested and working |
| 8375 | 318069-11 | Tested and working |
| 8375 | 390554-01 | Unknown |
| 8375 | 390554-02 | Unknown |
| 8375 | 318069-12 | Unknown |
| 8375 | 318069-13 | Unknown |
Kickstart ROMs for the Amiga 1200 should be burned to 100ns or faster 27C4096 EPROMs for use by the AmigaPCI.
Warning
Original Amiga Kickstart Mask ROMs and EPROMs, which are based on the 27C400, are not supported.