Repository navigation
|
can you explain after install process for a newbie, blueprint example ? |
Replies: 14 comments 67 replies
|
Thanks for testing! Was it the ST7121 build from the install page? For the blueprint, the order matters:
The blueprint needs Home Assistant 2026.8 or later. If it still fails, could you share your HA version and the exact message (or a screenshot)? |
|
You are wellcome, great project! i want to contrubute it it is st7121 latest version i have managed to implement ha blueprint, some problems that i cant manage is weather setting ? |
|
Thanks, and good to know the ST7121 build runs on a real unit! For the weather: which weather integration do you use in Home Assistant (Met.no, OpenWeatherMap, Météo-France, another one…)? And what does the screen show: nothing, wrong values, or only part of it? |
|
nothing, i live in Turkiye , no choice :) |
|
where can i configure it ? |
|
No problem with Türkiye for the forecasts: the tablet takes them from any weather entity in Home Assistant, including the default one, Met.no (Home Assistant usually sets it up by itself). I checked that Met.no answers for Istanbul, with about 10 days of forecasts. Where to set it: Settings → Devices & services → Entities, search for "Tab5 ·". Three lists are about the weather:
The screen follows within 10 minutes.
To be honest, I have only used it with Météo-France and OpenWeatherMap so far, not with Met.no on a real installation, and Met.no gives about 10 days, so the last days of the 15-day pages will stay empty. If something stays blank, a screenshot of the attributes of the "Tab5 Météo" entity would help. |
|
Version 3.5.0 is out, partly thanks to your feedback: https://github.com/Axellum/M5-Tab5-ESPHome-LVGL/releases/tag/v3.5.0 The screen speaks Turkish. Once the tablet runs 3.5.0, pick Türkçe in its « Langue » select (Settings → Devices & services → ESPHome → your Tab5). It was translated by an AI and nobody who speaks Turkish has read it yet, so if a word sounds wrong or a text is cut, just tell me here. How to update (two separate steps):
With these files, the rain card uses Open-Meteo by itself when there is no Météo-France rain sensor, so you have nothing to choose for it (if you already picked Open-Meteo by hand, nothing changes). One correction to my last message: with Met.no, Home Assistant gives 6 days of forecast (today included) and 48 hours, not about 10. So the home page (today + 4 days) is full, and the two following pages of the 15-day forecast only show the 6th day; the other days stay greyed out (« -- »). That's what the Met.no integration exposes, not a problem with your setup. |
|
wow what a great news , you honored me much, i will try now |
|
thats work thanks , any further plan for design change ? custom design ? |
|
Glad it works, thanks for letting me know! About the design: I have about twenty theme proposals for the look of the screen, made by different AI models, that I still have to sort through to pick one. Nothing is decided yet, and there's no date. If you'd like other changes or additions, tell me what you have in mind and we can look at it together. |
|
I am using tab5 with original battery I have solar system at home , can we add Solar system implement? Another issue is hourly forecast icons are not suitable for ie night time cloudy icon is with sun 😁 and hourly forecast icons order reversed late hours icons order are beginning on left side |
|
Thanks for these three points! Battery: you're right, the firmware never turns battery charging on, and nothing shows whether it's charging. I'm preparing a fix that turns charging on at startup and shows the charging state and the battery level in Home Assistant. I don't have a battery in my tablet, so I can't test it myself: would you be OK to try it once it's ready? Night icons: good catch 😄 At night, Met.no reports "partly cloudy" without saying it's night, so the screen drew the sun. The fix is in the Home Assistant files of the Tab5, no new firmware needed; I'm preparing it too. Solar: what would you like to see for your solar system? For example the power produced right now, the energy of the day, a home battery, what goes to or comes from the grid… and where on the screen? In the meantime, the blueprint can already put a sensor, like the solar power, on a tile of a room. |
|
I can test it , I have a tab5 with battery , Sorry to bother you 😁 I think user can be able to choose forecast easily via blueprint implementation like room entities Order of hourly forecast reversed also 😊 or I see it like reversed solar system lots of parameters (for ie I have no battery ) must have ; produced and consumption grid power ; At the time of user controlled ; İnstant (grid or solar system ) |
|
Thanks for all the details, and sorry: in my last message I missed your point about the order of the hourly forecast. You were right, it was reversed. Everything you asked for is in a test version, 3.6.0-rc.1: https://github.com/Axellum/M5-Tab5-ESPHome-LVGL/releases/tag/v3.6.0-rc.1
How to install it. It is a test version, on the beta channel: a tablet installed from the stable channel isn't offered it.
No hurry. When you have tried it, just tell me here what works and what doesn't. And thanks again: most of this version comes from your ideas. |
|
Bonjour Monsieur :) i have checked and tested ; tab5 battery sensor reads battery and ha reacts charging - not charging, suggestions;
|
|
Merhaba 🙂 and thank you for testing all of this so carefully, it helps a lot. What I'm working on, from your message. It will come as a new test version; I'll post the link here, with how to install it, when it's out.
Already there: 3.6.0. It came out this morning, after the rc.1 you tested. It brings a redrawn home screen (three aligned columns around the clock, buttons with icons only) and 21 themes, each light or dark, picked in Home Assistant (« Thème », « Clair ou sombre »). Your tablet should be offered it by its « Firmware » entity; as usual, replace the Home Assistant files with those of its The Home Assistant dashboard. If you'd like, could you also install the tablet's dashboard (it comes with 3.6.0)? It gathers every setting of the tablet, the battery switch included, with a Health view for when something goes wrong. It takes three steps: https://github.com/Axellum/M5-Tab5-ESPHome-LVGL/blob/main/docs/installation.md#step-7--a-home-assistant-dashboard-for-the-tablet-optional. Tell me if a step is unclear, or if something is missing or wrong in it. Battery icon. About the missing icon: it only appears once the switch « Tab5 Batterie montée » is on. It is on the device page of the tablet (Settings → Devices & services → ESPHome → your Tab5), in the Configuration card, and in the Settings view of the dashboard. It is off by default because, without a battery, the tablet can't tell by itself that there is none. When you have a moment, a screenshot of the history of « Tab5 Tension batterie » over a few hours with the battery in (while charging, once full, and after a while unplugged) would help me check that a battery never reads below 6 V. And does the level (« Tab5 Batterie », in %) look right to you? Shutters. Does yours report its position in Home Assistant (a % from 0 to 100)? It will help me check the popup. The 3 restarts. Thanks for mentioning it. If the Home Assistant files of the Tab5 are installed, Home Assistant should have created a notification called « Tab5 : journal du démarrage (…) » at that moment, with the reason of the restart and a few lines of addresses. Could you paste its text here? I still have the exact build of rc.1, so I can trace those lines back to the code. Without it I couldn't find the cause, so nothing changes there yet. If there is no such notification, the history of the « Tab5 Raison du redémarrage » entity around that time would already help. Local voice assistant. The tablet always talks to a Home Assistant voice pipeline (that's how ESPHome voice works), but every part of that pipeline can run at home:
Whisper, Speech-to-Phrase and Piper are Home Assistant add-ons. The local setup is described here: https://www.home-assistant.io/voice_control/voice_remote_local_assistant/ and Ollama here: https://www.home-assistant.io/integrations/ollama/. If your model runs in LM Studio or another OpenAI-compatible server instead, the HACS integration Home LLM (https://github.com/acon96/home-llm) can connect it. On the tablet, the « Domo » button uses your preferred pipeline and « Discu » the one picked in the list « Tab5 · pipeline de discussion · chat pipeline ». So you can keep the usual Assist for the house and put the local model in the discussion pipeline. On my side, I go through my own engine (vromvrom-engine, https://github.com/Axellum/vromvrom-engine) to have an LLM selector for the voice. But it's hard for me to advise you on it: I only manage it through AI, like many things these days. No hurry for any of this. Thanks again! |
|
Bonsoir Monsieur ! i have managed to update and tried lots of screens and themes, i am an ear nose throat specialist in türkiye , medical doctor surgeon , otolaryngologiest at state of government hospital Bucak burdur near near Antalya you may know :) Op Dr Huseyin YILDIZ, story begins with searching everything about m5stack staff so i see your project and here we are. thaks so much you accepting and listening what i say and value of my opinions , and honored me i made tab5 dashboard, i see only thing blinds automation doesnt appear and so on doesnt working, blinds ; i couldnt make it work , blinds pop ups window but function doesnt work thanks so much and apolagize for my english if i couldnt explain cleary |
|
Hello Doctor, At last, I'm answering you more personally than through Claude. My name is Axel Duviella, I work as an eyewear salesman in a supermarket in the south of France, in Saint-Vincent-de-Tyrosse, a small town, almost a village :). My adventure with the Tab began with a wish to discover AI tools, to learn what they can do and how intelligent they are, so I could form my own opinion of what they will bring to our societies. I needed a project, so I took the opportunity to replace the weather screen I had made 5-6 years ago by copying, pasting and tweaking (a Nextion screen, already with ESPHome). LLMs surprised me so much that I'm trying to share my project, and also to show what can be done with AI without coding (my coding knowledge is very light). Anyway, my secret for speed: Claude Opus 5.5. For a few weeks now it has been doing almost everything for me (coding the Tab, Windows settings, managing my Home Assistant through the community MCP and Samba). I have a week of holidays right now and I've gone "ultra", so I hope to move forward! But above all, I now have precious feedback thanks to you, and I admit I'm a little proud to have a user (which motivated me) :). About your English: I go through translation, or even through Claude, which knows the project better than I do ^^. I don't speak English, so feel free to write in Turkish if that's easier for you. About the shutters: had you noticed that tapping the title of the tile reverses the direction? The icon on the left shows the state of the shutter, but only closed or open. The icons on the sides of the weather tiles are the icons of the devices you chose (I never tap the Home Assistant button, the house at the top right: the icons tell me what each button does without going through it). Originally (I should put it back), the left icon was the room's icon. — Technical part, prepared with Claude — Why your shutter stopped answering. Thanks to your message, we found the cause. « Sync Tab5 Volet Serre » and « Tab5 · volet à course simulée » only exist in the optional file What you can do right now:
You are already on 3.7.0-rc.2 (the shutter popup only exists there): remember to also take the Home Assistant files of the same release ( And could you tell me which motor it is (brand, integration in Home Assistant)? It will help me check the popup. |
|
Something want to say but didn’t know wether its counter side of you projects logic , in battery or usb power might be awake only we touch screen . IT awakes spontaneously when screen is closed . Always awake then |
|
Hello again 🙂 No, it isn't against the logic of the project at all, it's a good point, especially on battery. I'm preparing the option: the screen would turn off by itself after a few minutes without a touch, and only come back on with a touch. It will come in a next test version; before that, I need a few details from you. Today, nothing turns the screen off by itself. It only turns off by hand (the « Display Backlight » entity of the tablet) or through the automation « Allumage/Extinction Ecran Tab5 selon WiFi Portable »: after 15 min without presence, or when your phone leaves home, if you picked a sensor or a phone in « Tab5 · capteur de présence » or « Tab5 · téléphone ». And it comes back on:
My questions:
Restarts and battery. Since the screen also comes back on at each restart: if the tablet restarted again, the text of the notification « Tab5 : journal du démarrage (…) » in Home Assistant would help me a lot, or else the history of « Tab5 Raison du redémarrage ». And on battery, a screenshot of the history of « Tab5 Tension batterie » over a few hours would still help me check the battery icon. |
|
hello, i have managed to work blinds,they are sonnoff dual r3 , our blinds formely shows percantage of close, as you described it works now, but maybe theme or pop up screen might be like ha animation not a basic slider :) , also buttons can be like ha dashboard butons .people like that ! butons can have pop up screen like ha dashboard and can seen like ha as people might be see battery percantage , voltage and cpu usage no presence sensor tap to awake work or not , cant test because it opens after 1-2 seconds spontaneusly same situation ; battery or usb ; it doesnt go sleep by itself, when i push the power button it takes 10 or more seconds to wake and then ha alert ; these are normal alerts but no necessary to know at that time because it is loading :) #1 démarrage, raison : plantage (chien de garde) |
|
Hello Doctor, Great news for the shutters, thanks for trying! Since your Sonoff Dual R3 reports its position, the popup should show its slider. Your ideas are noted: a shutter popup closer to Home Assistant's (a shutter you drag, with its animation, rather than a plain slider), buttons that look like those of a Home Assistant dashboard and open their own window, and the battery level, the voltage and the processor load in the tablet's system menu. I can't tell yet what is possible on the tablet's screen, but I'll look into it. — Technical part, prepared with Claude — Screen auto-off. It came this morning with v3.7.0-rc.3. After the update (Home Assistant files first, then the firmware), pick a delay in « Tab5 Extinction auto de l'écran » (device page, or Settings view of the dashboard). It is « Jamais » (never) by default, so nothing changes until you pick one; then the screen turns off after that long without a touch. The screen that comes back on after 1-2 s. To find the cause, could you:
Tap-to-Wake lights the screen at a shock, and pressing the tablet's button may be enough. With rc.3, « Okay Nabu » also lights the screen: if a TV or a conversation sometimes triggers the wake word, turn « Tab5 Rallumer l'écran à Okay Nabu » off too. And how do you turn the screen off: with the power button, or from Home Assistant? The power button and the alert. Thanks for the log, it's exactly what I needed. It says the tablet restarted with the reason « plantage (chien de garde) » (a watchdog), but there is no crash report in it, and the next lines are normal at every start-up. So I think it's the button itself that restarts the tablet, and the tablet takes that for a crash. Does it restart (about 10 s, then the start-up screen) at every press of the button, short or long? And were the 3 restarts of the other day also a press on the button? I'll check with my own tablet whether the button gives the same reason, and if so, how to stop this alert for it without hiding a real crash. Battery and voltage. Until they reach the tablet's screen, they are in the Health view of the dashboard (« Battery », « Voltage », « Charging »), shown when « Tab5 Batterie montée » is on. No hurry, and thanks again for all these tests! |
|
Hi 👋 short report time It works ! Tab5 now sleeps after rc3 with a changeable delay time . So forget restart loops ; no more it makes delay after opening is only when power off via button , it is normal because it loads all of things . no problem then Tap to wake and voice awake works but I couldn’t manage to you voice assist screen and voice assist properly. Maybe my own clumsiness 😒 for ie at that screen I couldn’t manage to speech to text and get answer via text by assist That’s all for now. Willsuggest new opinions if you accept new post thinking….. 🤔 Taking refuge in your forgiveness 😔 |
|
Rc4 👍 working like a charm !!! Want 2 things ; updating firmware procedure might be a one click solution ;). For downloading home asistant zip and replacing files and then restarting that is it 😁😁 Grouping Switches blinds etc. in room section ; minimalist design and opinion for like macOS popup icons ; one click and opens mini popup or like a spring etc or a circular popup or something like this project; link is here ; https://github.com/lsmarsden/bubble-card-modules/tree/main/modules/sub_button_wheel settings details might be able to be English 😊 |
|
Great news, thanks for testing so fast! 🙂 USB: fixed, and your current graph confirms it: about +0.17 A on battery all night (1.2 W), so the « screen off on battery only » switch and the energy saving can work now. Sun share: the ring « share of your consumption covered by the sun » only appears when the tablet gets the home consumption. In the blueprint « Tab5 — emplacements », check that your consumption sensor is picked in « Énergie consommée par la maison · Home energy consumption », then wait for the next update (a few minutes). Battery: better than before, but not right yet. Your tablet used a steady 1.2 W all night, so the percentage should go down in a straight line (about 7–8 % per hour). It still has flat parts and drops (85 % from 21:00 to 2:00, then 58 % → 7 % in two hours). The curve I used is from another battery. Your night is actually the perfect measurement to fix it: with a constant load, I can match each voltage to the real remaining energy and build a curve for the Tab5's own battery. Could you send me the history of « Tab5 Tension batterie » for the same night? Best is the file: in Home Assistant, History → pick that entity, from yesterday 19:00 to the end → « Download data » (CSV). And roughly when did it switch off? Thanks again, this helps a lot! |
before update latest rc2 what you want from me, ps 1: and video feed pictures are occasional catched up by tab5 , some time work sometimes doesn't no pict , when I checked camera feed everything is fine at the same time, ps 2: I think power of our use covered by sun means measure at that current time;? so I can't see at night or evening ???? or I can't set it correctly. don't know ps 3: https://github.com/Axellum/M5-Tab5-ESPHome-LVGL/blob/main/docs/images/tab5_ui_tour_fr.webp how can I see light off button above home tab? and can we add close all blinds or open all blinds ( we should be able to add groups and edit what we want ) |
ps 4: between -/+ symbols we can add blinds etc, but if one them is not inside a room , when we tab on blinds doesn't pop up menu and can't see in te combined window , but already it can be adjusted only -/+ buttons not a pop up or circular pop up bubble even any of them hasn't got. 
|
|
Thanks a lot for the two files and the photos, that's exactly what I needed! For the battery, there's nothing more to do on your side. Battery. Your two nights match within 5 minutes over the whole discharge: unplugged around 20:20 at 8.35 V, cut off by the battery's protection around 9:40, so about 13 h 20 min at 1.2 W. From that I built a curve for the Tab5's own battery. It's in a new test build, 3.9.0-rc.3 (beta channel, firmware only, nothing to change in Home Assistant). The percentage should now go down roughly evenly. One known flaw: around 8.0 V the voltage is very flat, so the level can still jump by about 20 % at once. Sun share (ps 2). You're right, there are two rings:
Cameras (ps 1). To find the cause, could you send me the All off / all closed (ps 3).
Garden shutter (ps 4). Good catch. I think this shutter comes from the blueprint and not from a room tile, and the Shutters popup only shows room tiles. I'll look at how to give it its own popup or the wheel, and put it in the shared window. Thanks again! |
|
Garden shutter (ps 4), follow-up. Confirmed: "Bahçe panjur" is in the blueprint's « Tuile − / + · − / + tile » section, but it isn't a tile of any room. The tile is what gives a shutter its popup, its wheel and its place in the Shutters popup, so without one the tablet could only move it with − / +. Right now, with nothing to update: add it as a tile of a room (a « Bahçe » room, or the living room / Mutfak if there's a free slot). Touching the value between − and + will then open its popup, its tile will have the wheel, and it will show in the Shutters popup on that room's page. In the next pre-release: touching the value of a shutter (or a valve) from that list that has no tile opens a wheel with Open / Stop / Close, plus Position (25 / 50 / 75 %) when it can be set to a position (#475). It needs both the new firmware and the new blueprint. With an older blueprint, Position works but Open / Stop / Close do nothing. |
|
Hello @husyildiz , a quick hardware question from another Tab5 user, if you have a minute. Your unit is the only ST7121 I know of that runs this firmware. What does the "Tab5 C6 Version" sensor show on your tablet? (Axel's ST7123 unit shows 1.4.1. I'd like to know whether newer units ship a newer C6 firmware.) If it's easy to check: which ESP32-P4 chip revision does it report? It appears in the serial boot log as chip revision: vX.Y, or with esptool flash-id as Chip is ESP32-P4 (revision vX.Y). We are about to buy units that will probably be ST7121, and these two values decide how we build and update the firmware. Thank you! |
|
i am at work , i check my ha via dns , tells tab5 offline , i think it drains its battery so quick , will check it, i remember it , it must be 1.4.1 ? not sure |
|
Thank you, look forward to your confirmation. |
c6 version 1.4.1 |
|
Hello! 🙂 I'm fine, thank you for asking, that's kind of you. Don't worry about what's happening in France: students are demonstrating, it's their right to shout, and it's almost a tradition here. My father and I did the same when we were teenagers 😄 — Technical part, prepared with Claude — Charge limit at 80 %. Thanks, I think you found a real bug. Every 10 minutes, the tablet turns the charger off for a few seconds to read the real battery voltage. In 80 % mode, it then takes that short pause for a stop and waits until the battery is down to 70 % before charging again. So the battery stays at the level it had: between 70 and 80 % the charger stays off, and below 70 % it only runs a few seconds every 10 minutes. In 100 % mode, charging starts again right after the check. I'll fix it. Until then, keep « Tab5 Limite de charge » at « 100 % ». I found it by reading the code; I don't have a battery to try it. If you remember the level it stopped at, tell me, it will help me check. Cameras. The Cameras popup doesn't show a video: it shows a still picture from Home Assistant, one at a time, refreshed while the popup is open. What do you see: an empty or black frame, or a picture that only changes now and then? And which version does the « Firmware » entity show? If the frame stays empty, a log like the one you sent last time would help. Thanks again! |
I am very happy to hear that you're good 👍 Black screen and it says last shown time only
|
|
Thanks for the photos, they help a lot! 🙂 Cameras. On your photos, « Son çevrimiçi: 00:53 » is the tablet's « Offline since 00:53 ». It shows this when Home Assistant reports a camera as unavailable, with the time it went offline; the tablet then doesn't even ask for its picture. Your two cameras show the same minute, so I think Home Assistant has seen both of them as unavailable since 00:53 last night, and the problem is between Home Assistant and the cameras, not on the tablet. Could you check in Home Assistant whether « Tapo_C520WS_7FA5 Canlı görüntü » and « Tapo C520WS ön bahçe Canlı görüntü » are « Unavailable »?
Thanks again! |
No they are working at the same time of reach from tablet . Doesn't write any logs about screens shot of video sources as before it writes at the same time .
|
|
Thanks for the two photos! 🙂 Look at your Home Assistant dashboard: under each camera, on the right, it says « Kullanım dışı ». That's how Home Assistant says « Unavailable » in Turkish. So Home Assistant itself sees the two camera entities as unavailable, even though the picture shows on that dashboard: the card there probably gets its video another way. The tablet asks Home Assistant for the camera entity's picture, and it doesn't ask at all for a camera that Home Assistant reports as unavailable. That's also why there's no camera line in the log anymore: before, the cameras were available and the tablet asked for their pictures. So the thing to fix is the two camera entities in Home Assistant, unavailable since 00:53. The integration that created them (Settings → Devices & services) should say why; reloading it may be enough. As soon as they are available again, the tablet shows their pictures, nothing to change on it. Thanks again! |
|
Hi! A question before I start, your opinion matters. You told me the French sensors in Home Assistant were complicated. Another user (on the HA forum) tells me the same. So I'm thinking of switching the names to English, and moving the « Tab5 · … » settings into the Tab5 integration, so they show in your Home Assistant's language (FR, EN, DE, NL, ES, IT, TR). To keep it simple on your side: after the update, Home Assistant would show a repair « Migrate the Tab5 entities », one click, and everything is renamed while keeping your settings. Nothing to redo by hand. Two questions:
No rush, I'd rather do it once and do it well. Thanks! |
Emnglish is fine and enough Doesn't matter which one is French but when we try to find a setting with entity is very difficult, i prefer all settings, automation and entities English 🙃 |
|
Hi Doctor 🙂 Back to the weather warnings for Türkiye. When you set up the Tab5, I told you to pick « Aucune » (none) for the warnings, because none of the sources I use covers Türkiye. I've been working on something for that, and I'd be glad if you could test it, knowing that it is a test, still being improved, not a finished thing. — Technical part, prepared with Claude — What it is. The official warnings of Türkiye are the MGM's (MeteoUYARI). The MGM publishes no open feed of them, and its terms ask for written permission before they are passed on, which I don't have. So Vigie (the small server that collects warnings for the Tab5 and Home Assistant) now computes a pre-alert of its own: from the ECMWF forecast (open data), it gives each of the 81 provinces a level for today and the next few days (none, watch, strong, severe), for rain, wind, snow, heat and cold, with thresholds learned for each province. It is not an official warning, and it is not as good as one. I measured it against the orange warnings the press reported: in 2026 it reached "strong" on the day for 63 % of the warned provinces (71 % the day before), it says "strong" on about 4 % of the days of a province, and it missed every wind warning of the test. So please keep following the MGM: this is to see how it behaves where you live, not something to rely on. How to try it (Home Assistant).
A sensor "Pre-alert (experimental, unofficial)" appears. Its state is today's level; its attributes give each day, the values (rain in mm, gusts in km/h…), the province's thresholds and the forecast run it comes from. The same integration also shows the earthquakes near you (USGS and EMSC, a separate sensor). The Tab5 screen doesn't show the pre-alert yet: first I'd like to know whether it is useful at all. You can also just open it in a browser, for Bucak: https://vigie.auxfilsdesidees.fr/v1/experimental/prealert?lat=37.46&lon=30.59 What would help me. When the MGM puts Burdur (or a province you know) in yellow or orange, did the pre-alert say something the day before, or the same day? And the other way round: does it say "strong" on days when nothing happens? Thanks in advance, and no pressure at all. |
Thanks for testing! Was it the ST7121 build from the install page?
For the blueprint, the order matters:
tab5_home_assistant.zipfrom the latest release, unzip it into HA'sconfig/folder, addpackages: !include_dir_named packagesunderhomeassistant:inconfiguration.yaml, restart HA.The blueprint needs Home Assistant 2026.8 or later. If it still fails, could you share your HA version and the exact message (or a screenshot)?