Update README.md

[ChuckBuilds]

Summary by CodeRabbit

• Documentation
  • Updated setup instructions for the Waveshare 92×46 display to clarify configuration options with Adafruit LED bonnet boards, including soldering and DIP switch settings.

_{✏️ Tip: You can customize this high-level summary in your review settings.}

[coderabbitai]

Caution

Review failed

The pull request is closed.

📝 Walkthrough

Walkthrough

Documentation update to README.md clarifying Waveshare 92×46 display requirements. The change specifies that soldering the E addressable pad on the Adafruit RGB Bonnet to "8" or toggling the DIP switch on the Adafruit Triple LED Matrix Bonnet is required.

Changes

Cohort / File(s)	Summary
Documentation Update README.md	Updated Waveshare 92×46 display bullet point to clarify E pad soldering requirement on Adafruit RGB Bonnet or DIP switch toggle on Adafruit Triple LED Matrix Bonnet; removed redundant "no soldering required!" note

Estimated code review effort

🎯 1 (Trivial) | ⏱️ ~3 minutes

Poem

🐰 A bonnet, a pad, a switch to flip—
Documentation takes a helpful trip!
Clarity shines where confusion once dwelled,
Now Waveshare displays work perfectly well! ✨

---

📜 Recent review details

Configuration used: defaults

Review profile: CHILL

Plan: Pro

📥 Commits

Reviewing files that changed from the base of the PR and between 4a63ff8 and a34cce2.

📒 Files selected for processing (1)

• README.md

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

_{Comment @coderabbitai help to get the list of available commands and usage tips.}