VectorLabel v1.15.0 (open alpha)

Install: download VectorLabel-Installer-1.15.0.pkg below and open it — or use Check for Updates… in the running app. The apps and installer are Developer ID-signed and notarized by Apple.

What changed in 1.15.0

Added

• The Engine now keeps Auto Print running. If Auto Print isn't running — it crashed,
  was quit, or never started — the Engine relaunches it within about 20 seconds, so
  Vectorworks exports can't silently go unnoticed while nothing is watching the export
  folder. This also means "Launch at login" on the Engine now effectively covers
  Auto Print too. (If Auto Print keeps dying instantly, the Engine stops retrying after
  3 attempts in 5 minutes and notes it in the log instead of retrying forever.)
• Groundwork for Brady i3300 support. Not yet a working driver — this lands the
  supply-side foundation so the driver can follow without further catalog work:
  • A full "Brady i3300" supply catalog (B30/B33 series), covering paper, nylon, vinyl
    cloth, self-laminating vinyl wraps (Standard + High Strength adhesive), harsh-
    environment and all-weather polyester, FreezerBondz, PermaSleeve heat-shrink sleeves,
    raised panel, vinyl tape (All-Weather + Repositionable), magnetic tape, and ToughWash
    — around 150 real part numbers, sourced from Brady's own product pages.
  • Supplies can now record how many labels are arranged side-by-side on the physical
    roll ("Quantity per Row" in Brady's terms) — needed because some small B33 labels
    ship several-across on one roll width, and this can differ between two SKUs of the
    identical label size.

Fixed

• The first-launch setup no longer duplicates starter templates on every update.
  Choosing "Install & Replace" for a starter template could silently create a second
  copy ("Sample 1_5x1_5-2", "-3", "-4"...) instead of overwriting the existing one — a
  side effect of the Engine no longer pre-loading the template list at launch (fixed
  last release to stop it stalling on Documents-folder permission). Existing
  duplicates from before this fix aren't merged automatically; remove the extras you
  don't want from the Template Designer's Open dialog or Finder.

Changed

• Dimension fields in the Designer's properties panel now show their unit in the
  header, e.g. "Width (in)" / "Width (mm)" — matching the existing "(px)" convention
  for pixel-based fields. Applies to every position/size field (X, Y, Width, Height,
  Corner radius, Diameter, Radius, table Column width / Row height) and updates live
  when you switch units.

---

Open alpha: the Brady M611 is hardware-validated; the Brady M610 cut behavior and the Brother P-touch drivers are not yet hardware-confirmed. User Guide · FAQ