zeClock v0.3.0

Raspberry Pi Image

Pre-built image for Raspberry Pi 4/5 with zeClock pre-installed.

Flash to SD card

gunzip -c zeclock-rpi.img.gz | sudo dd of=/dev/sdX bs=4M status=progress

Or use Raspberry Pi Imager / balenaEtcher — both support .img.gz natively.

First boot

1. Insert SD card and power on
2. If WiFi is not pre-configured, connect to the zeClock-Setup AP
3. Configure WiFi via the captive portal
4. zeClock starts automatically once connected

See the README for full documentation.

What's Changed

• fix(rpi): copy bundled GIFs to /data on every boot if missing by @ojacques in #48
• fix(rpi): protect /boot/firmware against SD card corruption by @ojacques in #49
• ci: switch image compression from xz to gzip by @ojacques in #50
• feat(brightness): log brightness transitions with trigger source by @ojacques in #51
• fix: prevent fsck from deleting WiFi config, enable web UI, fix multiline text by @ojacques in #52

Full Changelog: v0.2.0...v0.3.0