zeClock v0.4.0

Raspberry Pi Image

Pre-built image for Raspberry Pi 4/5 with zeClock pre-installed.

Flash to SD card

gunzip -c zeclock-rpi.img.gz | sudo dd of=/dev/sdX bs=4M status=progress

Or use Raspberry Pi Imager / balenaEtcher — both support .img.gz natively.

First boot

1. Insert SD card and power on
2. If WiFi is not pre-configured, connect to the zeClock-Setup AP
3. Configure WiFi via the captive portal
4. zeClock starts automatically once connected

See the README for full documentation.

What's Changed

• feat: show connected banner with URL/IP on HDMI console by @ojacques in #53
• feat: persist brightness to config, add restart button in web UI by @ojacques in #54

Full Changelog: v0.3.0...v0.4.0