PoeControl 0.1.40

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core; companion - a surface for Bitfocus Companion
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.36

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.34

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.32

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.31

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.30

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.29

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.28

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.26

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.

PoeControl 0.1.25

Pick the file for your app and board, poecontrol-<app>-<board>-*.uf2:

• app: osc - a DMX Core 100 or any OSC server; symetrix - a Symetrix DSP; qsys - a Q-SYS Core
• board: w5500 - WIZnet W5500-EVB-Pico2; w6300 - Waveshare RP2350-POE-ETH

To update: copy that file onto the POECONTROL drive. The device installs it, restarts, and goes back to the firmware it had if the new one does not start properly; status.txt says how it went. Settings are kept when the app is the same.

First install on a board without the partition table: hold BOOTSEL while plugging it into USB, copy poecontrol-partition-table.uf2 onto the RP2350 drive, and when the drive comes back, copy the .uf2 for your app and board.