Skip to content

2. Target SIM Setup & Quick Tile Cycle Guide

Jump to bottom
DK edited this page Aug 17, 2026 · 1 revision

Target SIM Setup

If you are using a dual-SIM device, you must configure which SIM card NetToggle should target when applying network mode changes.

Locate the Target SIM block (positioned just below the Execution Mode toggles on the main dashboard) and select one of the following configurations:

  • Auto: The app will automatically detect your primary active data SIM and apply the network mode changes to it. (Highly recommended for most users).
  • SIM 1: Bypasses automatic detection and forces all network mode commands specifically to the physical SIM card located in Slot 1.
  • SIM 2: Bypasses automatic detection and forces all network mode commands specifically to the physical SIM card located in Slot 2.

Configuring Your Cycle Modes

The Quick Tile Cycle allows you to select network modes sequentially as per your choice.

  1. Open NetToggle and locate the Quick Tile Cycle card. You will see a grid of available network options (e.g., Pref 5G, 4G Only, 2G Only).
  2. Tap the specific modes you want to include in your cycle. Active modes will highlight with a colored background.
  3. Verify the Cycle Order: Look at the dynamic text badge at the bottom of the card (for example, Cycle: 5G Only → 4G Only). This badge displays the exact sequential order the Quick Settings tile will follow every time you tap it.

Clone this wiki locally