Repository navigation
Releases: Diegoeyza/HunterPie_Analytics
Release list
HunterPie Analytics 1.0.9 (HP timeline fix)
HunterPie Analytics 1.0.9
A focused fix for consecutive hunts of the same monster. In 1.0.8, a later solo run could be merged into an earlier one when its damage total landed within 1% inside the wide cross-source window. The mod's HP samples were then shifted minutes into the quest, producing an HP line that started late and ran past the quest end.
Fixed
- Cross-source matching now requires the quest end timestamps to agree (within 120 s) before using the wide start window; the start window was also reduced from 600 s to 180 s.
- Consecutive hunts now stay separate, and their HP/DPS timelines line up again.
After updating
Run HunterPieAnalytics-Setup-1.0.9.exe, then click Full recheck once in the app. That re-imports the existing dumps with the fixed matcher and repairs affected hunts (it also recreates any consecutive runs that were previously swallowed).
The HuntDumper mod is unchanged at 0.11.0, so no in-game mod reinstall is needed if you already have it. If you only use the mod, HuntDumper-0.11.0.zip is unchanged.
Windows SmartScreen / antivirus: the installer is not code signed, so Windows may show "Windows protected your PC" (More info → Run anyway), and some AV tools may flag the PyInstaller bundle. Verify downloads with
SHA256SUMS.txt.
| File | What it's for |
|---|---|
HunterPieAnalytics-Setup-1.0.9.exe |
Start here. Dashboard + HunterPie companion + HuntDumper 0.11.0. |
HuntDumper-0.11.0.zip |
Just the REFramework mod (unchanged from 1.0.8). |
SHA256SUMS.txt |
Checksums for both files. |
Nexus Mods page: https://www.nexusmods.com/monsterhunterwilds/mods/5158
Full Changelog: v1.0.8...v1.0.9
HunterPie Analytics 1.0.8 (HuntDumper 0.11.0)
HunterPie Analytics 1.0.8 + HuntDumper 0.11.0
This release adds the Survival tab: per-hunter HP/DPS curves and a time-in-danger summary, captured by HuntDumper 0.11.0. The in-game mod also detects quest outcomes (clear / fail / time-up), records party HP and buffs, and the dashboard now warns you when an app update requires reinstalling the mod.
Highlights
- Survival tab — party HP + DPS on one timeline, min/avg HP, time below 50%/25%, time at full HP. Requires HuntDumper 0.11+.
- Quest results — cleared vs failed (including time-up) is detected from the quest state, not just carts.
- Unified Buffs — companion and mod buff data in one list, with companion data taking priority.
- Mod update notice — after an app update, the header shows a
Mod vX → reinstallpill and a one-time toast with install instructions. - Cross-source timeline fixes — HP and DPS now share one origin even when the companion and mod started at different times.
- Local time — hunt dates/times display in your timezone (stored as UTC internally).
- SOS party HP fix — players in non-contiguous game slots (e.g. slot 6) no longer lose their HP series.
Upgrading
Run HunterPieAnalytics-Setup-1.0.8.exe. It installs in place, keeps your database outside the install folder, and bundles HuntDumper 0.11.0.
If you only use the in-game mod, download HuntDumper-0.11.0.zip and replace reframework\autorun\hunt_dumper.lua.
Windows SmartScreen / antivirus: the installer is not code signed, so Windows may show "Windows protected your PC" (More info → Run anyway), and some AV tools may flag the PyInstaller bundle. Verify downloads with
SHA256SUMS.txt.
| File | What it's for |
|---|---|
HunterPieAnalytics-Setup-1.0.8.exe |
Start here. Dashboard + HunterPie companion + HuntDumper 0.11.0. |
HuntDumper-0.11.0.zip |
Just the REFramework mod (Vortex/game-folder layout). |
SHA256SUMS.txt |
Checksums for both files. |
Full Changelog: v1.0.7...v1.0.8
Nexus Mods page: https://www.nexusmods.com/monsterhunterwilds/mods/5158
v1.0.7
Which file do I need?
| File | What it's for |
|---|---|
HunterPieAnalytics-Setup-*.exe |
Start here. One-click install (per-user, no admin): the dashboard, the HunterPie companion, and the REFramework mod. |
HuntDumper-*.zip |
Just the in-game REFramework mod. Extract into the game folder (Vortex-ready). |
SHA256SUMS.txt |
Checksums for the two files above. |
Players: run HunterPieAnalytics-Setup-*.exe.
In-game mod only: HuntDumper-*.zip →
<game>\reframework\autorun\hunt_dumper.lua.
Windows SmartScreen / antivirus: the installer is not code
signed, so Windows may show "Windows protected your PC"
(More info → Run anyway), and some AV tools may flag the
PyInstaller bundle. Verify downloads withSHA256SUMS.txt.
Full Changelog: v1.0.6...v1.0.7
v1.0.6
Which file do I need?
| File | What it's for |
|---|---|
HunterPieAnalytics-Setup-*.exe |
Start here. One-click install (per-user, no admin): the dashboard, the HunterPie companion, and the REFramework mod. |
HuntDumper-*.zip |
Just the in-game REFramework mod. Extract into the game folder (Vortex-ready). |
SHA256SUMS.txt |
Checksums for the two files above. |
Players: run HunterPieAnalytics-Setup-*.exe.
In-game mod only: HuntDumper-*.zip →
<game>\reframework\autorun\hunt_dumper.lua.
Windows SmartScreen / antivirus: the installer is not code
signed, so Windows may show "Windows protected your PC"
(More info → Run anyway), and some AV tools may flag the
PyInstaller bundle. Verify downloads withSHA256SUMS.txt.
Full Changelog: v1.0.5...v1.0.6
v1.0.5
Which file do I need?
| File | What it's for |
|---|---|
HunterPieAnalytics-Setup-*.exe |
Start here. One-click install (per-user, no admin): the dashboard, the HunterPie companion, and the REFramework mod. |
HuntDumper-*.zip |
Just the in-game REFramework mod. Extract into the game folder (Vortex-ready). |
SHA256SUMS.txt |
Checksums for the two files above. |
Players: run HunterPieAnalytics-Setup-*.exe.
In-game mod only: HuntDumper-*.zip →
<game>\reframework\autorun\hunt_dumper.lua.
Windows SmartScreen / antivirus: the installer is not code
signed, so Windows may show "Windows protected your PC"
(More info → Run anyway), and some AV tools may flag the
PyInstaller bundle. Verify downloads withSHA256SUMS.txt.
Full Changelog: v1.0.4...v1.0.5
v1.0.4
Which file do I need?
| File | What it's for |
|---|---|
HunterPieAnalytics-Setup-*.exe |
Start here. One-click install (per-user, no admin): the dashboard, the HunterPie companion, and the REFramework mod. |
HuntDumper-*.zip |
Just the in-game REFramework mod. Extract into the game folder (Vortex-ready). |
SHA256SUMS.txt |
Checksums for the two files above. |
Players: run HunterPieAnalytics-Setup-*.exe.
In-game mod only: HuntDumper-*.zip →
<game>\reframework\autorun\hunt_dumper.lua.
Windows SmartScreen / antivirus: the installer is not code
signed, so Windows may show "Windows protected your PC"
(More info → Run anyway), and some AV tools may flag the
PyInstaller bundle. Verify downloads withSHA256SUMS.txt.
Full Changelog: v1.0.3...v1.0.4
v1.0.3
Which file do I need?
| File | What it's for |
|---|---|
HunterPieAnalytics-Setup-*.exe |
Start here. One-click install (per-user, no admin): the dashboard, the HunterPie companion, and the REFramework mod. |
HuntDumper-*.zip |
Just the in-game REFramework mod. Extract into the game folder (Vortex-ready). |
SHA256SUMS.txt |
Checksums for the two files above. |
Players: run HunterPieAnalytics-Setup-*.exe.
In-game mod only: HuntDumper-*.zip →
<game>\reframework\autorun\hunt_dumper.lua.
Windows SmartScreen / antivirus: the installer is not code
signed, so Windows may show "Windows protected your PC"
(More info → Run anyway), and some AV tools may flag the
PyInstaller bundle. Verify downloads withSHA256SUMS.txt.
Full Changelog: v1.0.2...v1.0.3
v1.0.2
Windows SmartScreen / antivirus: the direct-download installer
and.exeare not code signed, so Windows may show
"Windows protected your PC" (More info → Run anyway), and some
antivirus tools may flag the PyInstaller bundle. The Microsoft
Store build is re-signed by Microsoft and shows no warning.
Verify downloads withSHA256SUMS.txt.
Install (players): run HunterPieAnalytics-Setup-*.exe
(per-user, no admin) or use the Store build. The in-game mod is
HuntDumper-*.zip (REFramework) — extract it into the game folder.
Full Changelog: v1.0.1...v1.0.2
v1.0.1
Windows SmartScreen / antivirus: the direct-download installer
and.exeare not code signed, so Windows may show
"Windows protected your PC" (More info → Run anyway), and some
antivirus tools may flag the PyInstaller bundle. The Microsoft
Store build is re-signed by Microsoft and shows no warning.
Verify downloads withSHA256SUMS.txt.
Install (players): run HunterPieAnalytics-Setup-*.exe
(per-user, no admin) or use the Store build. The in-game mod is
HuntDumper-*.zip (REFramework) — extract it into the game folder.
Full Changelog: v1.0.0...v1.0.1
v1.0.0
Windows SmartScreen / antivirus: the direct-download installer
and.exeare not code signed, so Windows may show
"Windows protected your PC" (More info → Run anyway), and some
antivirus tools may flag the PyInstaller bundle. The Microsoft
Store build is re-signed by Microsoft and shows no warning.
Verify downloads withSHA256SUMS.txt.
Install (players): run HunterPieAnalytics-Setup-*.exe
(per-user, no admin) or use the Store build. The in-game mod is
HuntDumper-*.zip (REFramework) — extract it into the game folder.
What's Changed
- Feat/ship ready by @Diegoeyza in #4
- feat: ship-ready desktop app, installers, Nexus bundle, and Windows fixes by @Diegoeyza in #5
New Contributors
- @Diegoeyza made their first contribution in #4
Full Changelog: v2.0...v1.0.0