Available Instruction Set

Base Instruction Set

The DRISC-V Architecture uses RV32I as its base, meaning it operates with 32-bit instructions and 32-bit memory addresses. It includes 32 general-purpose registers available for most operations.

The following table lists the registers available in the processor. While each register has a recommended role defined by the non-ISA ABI (Application Binary Interface) specification—and these roles are enforced in real-world applications—beginners don’t need to worry about them too much at this stage. This guide introduces them gradually, with deeper explanations provided in later pages.

RV32I Registers

Register	ABI Name	Description
x0	zero	Constant value 0
x1	ra	Return address
x2	sp	Stack pointer
x3	gp	Global pointer
x4	tp	Thread pointer
x5	t0	Temporary register
x6	t1	Temporary register
x7	t2	Temporary register
x8	s0/fp	Saved register / frame pointer
x9	s1	Saved register
x10	a0	Function argument / return value
x11	a1	Function argument / return value
x12	a2	Function argument
x13	a3	Function argument
x14	a4	Function argument
x15	a5	Function argument
x16	a6	Function argument
x17	a7	Function argument
x18	s2	Saved register
x19	s3	Saved register
x20	s4	Saved register
x21	s5	Saved register
x22	s6	Saved register
x23	s7	Saved register
x24	s8	Saved register
x25	s9	Saved register
x26	s10	Saved register
x27	s11	Saved register
x28	t3	Temporary register
x29	t4	Temporary register
x30	t5	Temporary register
x31	t6	Temporary register

The following table shows every available instruction in the DRISC-V Architecture. Although only 5 bits are shown here, RV32I opcodes use 7 bits in total. The first 2 bits ([1:0]) are always 11, indicating a 32-bit instruction. While the instruction set may seem minimal, each opcode supports multiple variants and parameters that expand its functionality.

Note: An opcode (operation code) is the portion of a machine instruction that specifies the operation to be performed.

DRISC-V Opcodes

Bits [6:2]	000--	001--	010--	011--	100--	101--	110--	111--
---00	LOAD	OP-IMM	STORE	OP			BRANCH	SYSTEM
---01		AUIPC		LUI				JALR
---10
---11								JAL

The instructions are described in more detail in later pages of this wiki. For now, here's a brief overview of their functionality:

---

Load and Store

These instructions handle data exchange between system memory (RAM) and the processor’s internal registers. Since RISC-V is a register-register architecture, Load and Store are the only instructions that interact with memory directly. All other instructions operate solely on internal registers.

---

OP and OP-IMM

Short for Operation and Operation-Immediate, these instructions perform arithmetic and logic operations in the ALU (Arithmetic and Logic Unit). The immediate variants allow embedded constants to be used instead of registers. For example, you can add a register value to a 12-bit immediate encoded directly in the instruction. Immediate sizes vary across the instructions, but ALU operations typically use 12-bit immediates.

---

JAL and JALR

These are unconditional jump instructions. When executed, they change the program counter(PC) to a target address and save the return address in a register.

• JAL (Jump and Link) uses a 20-bit immediate added to the current address.
• JALR (Jump and Link Register) adds a register value to a 12-bit immediate, allowing jumps to absolute memory positions.

---

Branch

Branch instructions perform conditional jumps based on comparisons between two registers. If the condition is met, a small immediate is added to the current address to determine the jump target. Unlike JAL and JALR, Branch instructions do not save the return address.

---

LUI and AUIPC

These instructions load 20-bit constants into registers.

• LUI (Load Upper Immediate) places the value in the upper 20 bits of a register.
• AUIPC (Add Upper Immediate to PC) adds the immediate to the current program counter.
  These are often used in combination with OP-IMM to construct full 32-bit constants.

---

System

System instructions provide access to privileged operations and special architectural features. These include environment calls, CSR (Control and Status Register) access, and other control mechanisms. More details are available in later pages of this wiki.

ISA Extensions

The DRISC architecture provides 4 ISA extensions: U, Zmmul, Zicsr and the Zicntr.

Zmmul

The Zmmul extension enables multiplication operations in the ALU (Arithmetic and Logic Unit). Its name may seem complex, but it simply refers to a subset of the broader M extension, which also includes division and modulo operations.

Division was intentionally excluded from this project to keep the implementation manageable. Division circuits are significantly more complex than multiplication, and while the internal logic of mathematical operations is abstracted in simulations, it was decided to omit division for now. However, it may be added in future versions.

All multiplication operations are handled through the OP instruction format and support 32-bit operands. The result of a multiplication can be accessed either as the lower 32 bits or the upper 32 bits of the full 64-bit result.

Currently, the implementation does not include any optimization for consecutive instructions that retrieve both the upper and lower parts of the result. This choice simplifies the design and keeps the architecture clean for educational and prototyping purposes.

Zicsr Extension Overview

The Zicsr extension introduces support for Control and Status Registers (CSRs) in RISC-V, along with a set of system-level instructions that enable their manipulation. These instructions facilitate operations such as system calls, environment breaks, and other privileged tasks.

CSRs provide essential information about the processor’s current state. This includes details such as the processor’s version, supported instruction sets, privilege levels, and interrupt configurations. Their implementation may vary depending on the processor design and the supported extensions.

Note: Not all CSRs defined in the RISC-V specification are required to be implemented. Additionally, some implemented CSRs may not support all specified bits. Certain CSRs are introduced through other extensions, which will be discussed in later sections.

Machine-Level CSRs and Counters

Register	Description	Notes
mvendorid	Identifies the vendor	Fixed value: 0x00af001d
marchid	Identifies the architecture	Fixed value: 0x00000000
mimpid	Implementation ID	Unique per architecture revision
mhartid	Hardware thread ID	Fixed value: 0x00000000 (single-core)
mstatus	Processor status flags	Implements: Previous Privilege (PP), Interrupt Enable (IE), Previous IE (PIE)
misa	ISA extensions supported	Extensions: E, I, M (no division), U; disabling not supported
mie	Interrupt enable bits	Supports machine-level software, timer, and external interrupts
mtvec	Trap-handler base address	Default: 0x80000001 → base 0x80000000, vectored mode
mstatush	Upper bits of mstatus	Only relevant bit: user-mode endianness (fixed to 0)
mscratch	Temporary storage for trap handling	Used during trap execution
mepc	Exception program counter	Stores last accessed address before a trap
mcause	Trap cause	Includes interrupts and exceptions (e.g., misaligned address, illegal instruction)
mtval	Trap value	Contains the instruction or address that caused the trap
mip	Pending interrupt flags	Controlled by external devices; mirrors mie bits
cycle	Cycle counter	Increments every clock cycle; each pipeline stage takes 2 cycles
time	Time counter	Triggers a memory load when read
instret	Instruction retirement counter	Increments per instruction (every 2 cycles); does not increment during exceptions
cycleh	Upper 32 bits of cycle
timeh	Upper 32 bits of time
instreth	Upper 32 bits of instret