Skip to content

EAGLE Not Closing

Jump to bottom
Dave Williams | DitroniX | G8PUO edited this page Jul 22, 2026 · 2 revisions

Hang-up, or delay close noticeable when firewall blocking

This will save any possible hang-ups when closing the EAGLE application, especially with firewall blocking in place.

Should you have a previous subscription, with a previous install, you need to make a small change too.

  1. Rename/remove the subscription.v1 file, found in \AppData\Roaming\Eagle

For the norm, this delayed close is not a problem.

TIP: If you have clicked the 'close', this sometimes sets off the 'close process'. This can take up to 2 minutes.

If you then start editing during this period, such as schematic or board for example, EAGLE can suddenly close whilst you are in the project.

Best let EAGLE close first, then re-open, or remember to save your project on route.

Further Information

Additional information, and other technical details on this project, maybe found in the related repository pages.

Repository Folders

  • Code (Code examples for Raspberry Pi, Arduino IDE, PlatformIO, Python etc.)
  • Datasheets and Information (Component Datasheets, Schematics, Board Layouts, Photos, Technical Documentation)
  • Certification (Related Repository Project or Part, Certification Information)

Repository Tabs

  • Wiki (Related Repository Wiki pages and Technical User Information)
  • Discussions (Related Repository User Discussion Forum)
  • Issues (Related Repository Technical Issues and Fixes)

We value our Customers, Users of our designs and STEM Communities, all over the World . Should you have any other questions, or feedback to share to others, please feel free to:

Dave Williams, Maidstone, UK.

Electronics Engineer | Software Developer | R&D Support | RF Engineering | Product Certification and Testing | STEM Ambassador

STEM

Supporting STEM Learning

Life is one long exciting learning curve, help others by setting the seed to knowledge.

DitroniX Supporting STEM

Clone this wiki locally