Skip to content

Releases: Draganito/splitgrade-controller-sensecap

Release list

v0.2.1 — automated dose metering

v0.2.1 — automated dose metering Latest
Latest

Choose a tag to compare

View all tags
@Draganito Draganito released this 09 Sep 18:57
v0.2.1
572eac7

Sender firmware: READ REF now drives the head (same path as MEAS BLK/LIT), 3 s LED warm-up, 20-sample trimmed mean. RP2040 bridge is unchanged from 0.2.0.

  1. ESP32-S3 (CH340 port, usually /dev/ttyUSB0):
sudo apt install esptool
esptool --chip esp32s3 --port /dev/ttyUSB0 --baud 921600 write_flash 0x0 \
  splitgrade-sensecap-sender-0.2.1.bin
  1. RP2040 (optional, for TSL2591/AS7343): hold the internal BOOT button, plug the RP2040 USB-C, copy the .uf2 onto the RPI-RP2 disk.

Full steps: FLASH.md

Flash the LED head separately: https://github.com/Draganito/darkroom-enlarger-head/releases

Assets 4
Loading

v0.2.0 — SenseCAP sender + RP2040 bridge

v0.2.0 — SenseCAP sender + RP2040 bridge

Choose a tag to compare

View all tags
@Draganito Draganito released this 04 Sep 08:53
v0.2.0
515326b

Two files for the SenseCAP Indicator D1. No PlatformIO.

  1. ESP32-S3 (CH340 port, usually /dev/ttyUSB0):
sudo apt install esptool
esptool --chip esp32s3 --port /dev/ttyUSB0 --baud 921600 write_flash 0x0 \
  splitgrade-sensecap-sender-0.2.0.bin
  1. RP2040 (optional, for TSL2591/AS7343): hold the internal BOOT button, plug the RP2040 USB-C, copy the .uf2 onto the RPI-RP2 disk.

Full steps and LED count (99 vs 109): FLASH.md

Flash the LED head separately: https://github.com/Draganito/darkroom-enlarger-head/releases

Loading