Releases · FoysalAhammad/WiFi-Repeater

Production-ready ESP32 NAT WiFi Repeater — pre-built firmware only. Flash it and go; no source code needed.

🔐 HTTP Basic Auth on the configuration panel (defaults admin / admin — change it)
🙈 Stored passwords are never echoed back to the browser; every field is HTML-escaped
📝 Input validation (SSID 1–32, password ≤ 63) and a POST form so credentials never land in URLs/logs
📊 GET /api/status JSON monitor — uptime, STA/RSSI, clients, NAPT, free heap, version
📶 Exponential back-off reconnect (5 → 10 → 20 → 30 s) + setAutoReconnect
🎚️ NAPT re-arms automatically after every uplink reconnect
🏷️ mDNS → open the panel at http://repeater.local
💡 Status LED: solid = uplink OK · slow blink = reconnecting · fast blink = needs config
🏭 Factory reset: hold BOOT 5 s, or serial reset
✅ Compiled with arduino-cli 1.5.2 + Arduino-ESP32 3.3.12 — 0 compiler warnings

Item	Value
Repeater AP	`ESP_Repeater`
AP password	`repeater123`
Panel URL	`http://192.168.4.1` — or `http://repeater.local`
Panel login	`admin` / `admin`
Serial console	115200 baud
Build FQBN	`esp32:esp32:esp32:PartitionScheme=huge_app,FlashMode=dio,FlashSize=4M`

File	Offset	Bytes	SHA-256 (first 16)
`WiFiRepeater-full.bin`	`0x0`	4194304	`b7ba0493eba96844`
`WiFiRepeater-app.bin`	`0x10000`	990944	`5563bff34c890211`
`WiFiRepeater-bootloader.bin`	`0x1000`	23488	`7c5e6c42dcd3b658`
`WiFiRepeater-partitions.bin`	`0x8000`	3072	`aaae2888c5a6a348`
`WiFiRepeater-ota.bin`	`0xE000`	8192	`f94c5d786a7a8fab`

# easiest: one file, one offset
esptool.py --chip esp32 --before default_reset --after hard_reset \
  write_flash 0x0 WiFiRepeater-full.bin

Or use the browser-based ESP Web Flasher — no install needed.

⚠️ Authorized testing only. Run this on networks you own or have written permission to test.

Navigation Menu