Skip to content

Releases: Garvit-Agrawal7/pipemix

Release list

Pipemix

Pipemix Latest
Latest

Choose a tag to compare

View all tags
@Garvit-Agrawal7 Garvit-Agrawal7 released this 27 Sep 18:06
0.3.0
b026e8a
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

PipeMix 0.3.0

New: Windows support

  • Native Windows build using WASAPI, with the same GUI and CLI as Linux. It ships as a PyInstaller + Inno Setup installer.
  • With VB-CABLE: the full hub mode, including per-app routing. An app can play on several outputs at once.
  • Without VB-CABLE: mirror mode. One output becomes the Windows default and the others copy it. A banner says when you're in this mode, and the main output is marked PRIMARY.
  • The Apps tab shows when an app won't switch outputs until you restart it (for example, Apple Music).
  • When you stop sharing, Windows goes back to a sensible default output.

Linux

  • Lower delay: each output is now delayed only 30 ms plus the slowest device's latency (about 230 ms with Bluetooth), and all outputs stay in sync.
  • Fixed an echo: when an output disappeared, its audio could loop back into the hub.
  • Outputs that disconnect stay in the session and come back when they reconnect, so you don't have to tick them again.
  • Bluetooth outputs recover when their sink is recreated, for example after a codec switch or a WirePlumber restart.
  • Quick taps on toggles and presets are applied in order, and the last one wins.
Assets 4
Loading

Pipemix

Pipemix

Choose a tag to compare

View all tags
@Garvit-Agrawal7 Garvit-Agrawal7 released this 24 Sep 13:54
0.2.0
4f66489

PipeMix v0.2.0

New

  • Per-app multi-output: send a single app to any subset of your shared outputs, or pick "Enable all" to have it follow the session.
  • In-sync playback: each output gets its own delay based on its reported latency, so Bluetooth and wired devices play together. To fine-tune by ear, use PipeWire's latency offset.
  • Live updates: plugged-in USB/HDMI outputs and app streams now appear on their own. No more manual Refresh or 3 s polling.
  • Wired hotplug: a USB/HDMI output unplugged mid-session stays listed as reconnecting and rejoins when it's plugged back in, the same way Bluetooth devices do.

Fixes

  • The window no longer freezes during Bluetooth connects and disconnects.
  • Stopping sharing or quitting moves streams back to the original default output first, so audio doesn't cut out.
  • Outputs that rejoin the session show as ticked again.
  • A session that fails to start no longer leaves stray hub modules behind.
  • Volume changes are applied in order, and toggling an output makes far fewer pactl calls.
Loading