Rad Pro 3.0: Feedback for Bosean FS-600/FS-1000/FS-5000

[Gissio]

I introduced several updates to the code for Bosean devices. Could you verify everything works correctly?

Also, is the alert LED operating as expected? It should display green pulses when no alert is active, and alternate between solid orange and green pulses when a warning is active, or solid red and green pulses when an alarm is active.

When connecting your powered-off device to a USB port, do you get to see the battery indicator for five seconds?

Additionally, after installing 3.0, can you confirm it can be updated using the Rad Pro web installer?

[Noahtheg]

When plugging in USB there's a vibration and green led pulse but no battery indicator screen

Here's what the warning alarm looks like on fs 5000

https://youtube.com/shorts/Dcbe8XofRwE?si=n9NZ_0D0EwIJocQA

[Gissio]

Thanks for your video. The system clock is ticking 50% too slow. Will be fixed in the next release!

Did you run into issue #282?

[Gissio]

One more thing: could you re-download https://github.com/Gissio/radpro/releases/tag/3.0rc1 and try again?

[Gissio]

Noahtheg: I mean, what happens when the device is powered off and you connect it to USB?

[Hantervit]

Hello. I can’t flash my Bosean-FS5000. I downloaded the firmware, unpacked the archive and launched .bat file. The terminal asks to enter the language, while the script does not offer a choice, as it was on version 2.2beta2. After entering the characters RU, a mistake appears that the facel of the firmware was not found.

[Hantervit]

I checked the EN file the previous one, I thought the error only in the version of the RU. But he also does not work for me. I remember a message about the 2.2beta5 version when someone had Bosean after firmware on the screensaver, red LED burned and vibration worked. I had exactly the same. In this case, the firmware 2.2beta2 worked fine for me.

[Hantervit]

Maybe this information will help. In version 2.2beta2, when turned on, there was an inscription that the control amount of the firmware is incorrect, but Bosean worked. Starting with the 2.2beta5 version Bosean version no longer works.

[Gissio]

I didn't sign the firmware so the checksum error is expected. The important thing is this didn't fix the problem, and helped me pinpoint the error. Thanks a lot!

[Gissio]

Can you try what I posted in #282, and continue the conversation there?

[Hantervit]

Well, I shot the video and laid it there.

[Ilja-code-art]

I tested Rad Pro web installer
Erasing flash memory (100%)...

Flashing firmware (100%)...

Restarting device...

Syncing date and time...
All looks ok but the time was not set the same as my pc...

[Gissio]

I’m glad it works! Could you share the time displayed on your PC and the counter? Is the date correct? This could be related to a daylight saving time issue.

With the counter powered off, what happens when you connect it to USB?

Additionally, should Lithuanian be added to the list of translations?

[Ilja-code-art]

I’m glad it works! Could you share the time displayed on your PC and the counter? Is the date correct? This could be related to a daylight saving time issue. >
All now ok is with the time after the second time to try. I just restarted a PC...

With the counter powered off, what happens when you connect it to USB?>
Vibrate one time and led blinks one time green - NO the battery indicator for five seconds!

Additionally, should Lithuanian be added to the list of translations? Its depends. I can help with the Translate. by the way I am only one in Lithuania who uses this device and this firmware.

Also, is the alert LED operating as expected? It should display green pulses when no alert is active, - YES
and alternate between solid orange and green pulses when a warning is active, - YES
or solid red and green pulses when an alarm is active. - YES

[Ilja-code-art]

Random generator-> ASCII, Alphanumeric, Hexadecimal, Decimal, Binary -> Can they generate little bit faster?

[Gissio]

According to the manual, you can generate bits faster by using a radioactive source!

[Ilja-code-art]

Cool. Will try!

[NuclearPhoenixx]

Does the web installer work only after installing 3.0 and onward?

[Gissio]

That is correct!

It should make things much easier.

[NuclearPhoenixx]

Yes, that's a very nice feature!

[Ilja-code-art]

That is correct!

It should make things much easier.

It should say to what version now the update is going...
example: The version found on the device 3.0. The latest is: 3.0.1 Update to the latest?

[Gissio]

Great idea!

[Ilja-code-art]

With the 3.0.1 there is the battery indicator for five seconds! But the screen is very dark!!!

[Ilja-code-art]

yes. In the dark not really I can see it but the indicator appears for 5 seconds

[Gissio]

I believe I understand the issue. Could you lower the brightness? If my intuition is correct, this should result in the brightness increasing.

[Ilja-code-art]

no not increasing but decreasing. With the High is visible some thing. With Very low - not really visible the battery indicator...

[Gissio]

It was an integer overflow problem.

Please retry the update with the web installer. Note that the new firmware will still display as Rad Pro 3.0.1, so don't be concerned by the unchanged version label.

I've also implemented a power optimization that may cause the device to freeze at the splash screen.

Please confirm if the following work:

• The device boots successfully.
• The display brightness appears correct for all brightness levels.
• When connecting a powered-off device to USB, the battery indicator displays for five seconds.

[Ilja-code-art]

The device boots successfully. - YES
The display brightness appears correct for all brightness levels. - YES
When connecting a powered-off device to USB, the battery indicator displays for five seconds. - NO cant be visible in the day light. only in the dark

[Ilja-code-art]

the battery indicator displays for five seconds and only in the dark it can be visible

[Gissio]

Please make a short video of the following:

1. Connect a powered-off device to a USB power source. You mentioned that the battery indicator is dimly visible for 5 seconds.
2. Power on the device.
3. Power off the device.
4. Press any key. Observe whether the battery indicator appears and if it is dimly lit or correctly illuminated.

[Ilja-code-art]

Ok. I will make a video when it will be dark...

1. Connect a powered-off device to a USB power source. You mentioned that the battery indicator is dimly visible for 5 seconds. - dimly visible...
2. Press any key. Observe whether the battery indicator appears and if it is dimly lit or correctly illuminated. - dimly visible

[Ilja-code-art]

https://github.com/Gissio/radpro/blob/main/docs/devices/Bosean_FS-5000/install.md

Just experimenting...

[Ilja-code-art]

web update and the time synchronization:
20:15 PC
FS-5000 03:03
2025-01-01 UTC+03:00

I erased all memory with STM32 USB programmer. Then uploaded radpro-bosean-fs5000-en-3.0.1 file on the device. Then time was set to 00. After that I did the web update. And see up what time results I get...

[Ilja-code-art]

Edit:
updater wia web with Factory reset: function - Time synchronization ok!!!!

[Gissio]

I don't follow you. When does it work and when not? What you mentioned earlier seems to indicate that the time zone is set to UTC-03:00, not UTC+03:00. Perhaps the sign is wrong?

Got it! Sometimes it works, but sometimes you get the previous error and then the time is not synchronized.

[Ilja-code-art]

I will make more experiments then I will say how is real situation....
By the way. You need to get this device, Then it will be easer to test...

[Ilja-code-art]

Sometimes it works, but sometimes you get the previous error and then the time is not synchronized. - No error!!! Just time is not synchronized!

[Ilja-code-art]

Slow baud rate: - web installer - not showing.

[Gissio]

I think I found the reason for the dim battery indicator during power-off.

Could you please retry the web installer and check if the battery indicator now displays correctly when an unpowered device is connected to USB?

Note that the firmware version will still appear as Rad Pro 3.0.1, so don't be concerned by the unchanged version label.

[Ilja-code-art]

Nothing. The same... I will make a photo and upload here. My phone is not possible to film this in a dark...

[Gissio]

The browser may be caching an older version of the firmware. Could you please try running the web installer again?

Do not worry about the photo.

[Ilja-code-art]

Ok. Now I will try.
Rad Pro 3.0.1-test - On the web.
By the way there is no problem and bin file burn to the device with a programmer ;)

[Ilja-code-art]

https://www.swisstransfer.com/d/9d36434d-40e5-48e3-b513-cdf5568c57dc Please download a video!!!
one video is powered by programmer other - by battery :) By the way this is bin file that I downloaded...
On the boot it suck's... But icon is clear...

[Ilja-code-art]

After the web update: the same:

https://www.swisstransfer.com/d/bda0985c-3ba1-4382-987d-edd92ace2bba

[Gissio]

Nice! So it looks like everything is sorted out now.

[Ilja-code-art]

please update the web

[Gissio]

Using Google Chrome:

1. Open the Rad Pro web installer.
2. Press Ctrl+Shift+I to open Chrome DevTools.
3. Open the Network tab.
4. Tick the Disable cache checkbox.
5. Reload the page.
6. Follow the web installer's steps.

This will force Chrome to download the latest firmware.

[Ilja-code-art]

Using Google - not wallowed.
Web update works fine.. U faster update the then I checked... This was so complicated :D I think that web update old file but this was the latest :)

All is working fine!!! :)

[Gissio]

Could someone try flashing this binary with an ST-LINK and see if it boots?

radpro-bosean-fs5000-3.0.2-test4.bin.zip

If successful, please reinstall using the RadPro Installer and confirm if it works as expected.