IV Pole Cradle v3.0.0

The v3 form-fitting equipment cradle is the current recommended design, joined by every printable part in the OpenPoleMount system.

Print files attached:

• OpenPoleMount_IV-Pole_v3.stl — v3 cradle body (current design)
• OpenPoleMount_IV-Pole_v2.stl — v2 universal holder
• OpenPoleMount_IV-Pole_v1.stl — v1, best used as a pole-mounted accessory box
• OpenPoleMount_Pole_Mounting_Block_V1.stl — the shared mounting block
• OpenPoleMount_Pole_Mounting_Block_ThandleThumbscrew-V1.stl — block thumbscrew
• thumbscrew_v14_flat_Thandle.stl — T-handle thumbscrew used by all cradles

Print guides, assembly instructions, BOMs, and risk analyses: https://openpolemount.com — see the site changelog for details. Hardware license CERN-OHL-W-2.0; documentation CC-BY-SA-4.0.

IV Pole Cradle v2.0.0

IV Pole Cradle v2 — current recommended design

The v2 cradle is the recommended design for mounting the Curlin CMS6000 on a standard home IV pole. The pump seats fully and securely with the keypad and screen accessible.

Files in this release

File	Description
OpenPoleMount_IV-Pole_v2.stl	v2 cradle body — print 1x
thumbscrew_v14_flat_Thandle.stl	T-handle thumbscrew — print 1x
OpenPoleMount_IV-Pole_v1.stl	v1 (legacy) — best repurposed as a pole-mounted accessory box

Print settings

PLA, 1 mm walls minimum, 25% infill (non-concentric pattern). See the Print Guide for full details.

Safety

This is a reference design, not a medical device. Read the disclaimer before use.

v1.1.0 — IV Pole Mount v2

What's new in v1.1.0

• IV Pole Mount v2 (OpenPoleMount_IV-Pole_v2.stl) — revised exterior shape, same functional dimensions and specs as v1
• All three STL files attached for download

Files

File	Description
OpenPoleMount_IV-Pole_v1.stl	Original cradle body
OpenPoleMount_IV-Pole_v2.stl	Revised cradle body (new exterior shape)
thumbscrew_v14_flat_Thandle.stl	T-handle thumbscrew (use with either cradle)

Print Settings

Minimum specs for mechanical integrity:

• Material: PLA
• Walls: 6 perimeters
• Infill: 35% 3D honeycomb
• Top/Bottom: 2 mm

See the print guide for full details.

License

Hardware: CERN-OHL-W-2.0 — modifications must remain open source.

v1.0.0 — Curlin CMS6000 IV Pole Cradle

First Release

The first fully 3D-printable IV pole mounting cradle for the Curlin CMS6000 infusion pump.

Files

• — IV pole cradle for Curlin CMS6000
• — Thumbscrew for pole attachment (T-handle grip)

Print Settings

• Material: PETG (minimum) or ASA/ABS
• Infill: ≥40% for all load-bearing parts
• Supports: Required for cradle (not needed for thumbscrew)
• Full print guide: https://openpolemount.com/print-settings/

⚠️ Disclaimer

This is a reference design, not a medical device. See DISCLAIMER.md.

License

Hardware: CERN-OHL-W-2.0 | Documentation: CC-BY-SA-4.0