Repository navigation
Motor Control Library 1.9.0
·
5 commits
to main
since this release
Motor Control Library Release Notes
Motor control library provides implementation of motor control algorithm to various control methods, control types and different motors.
What's Included?
Below table provides details of the different control type, controlled entity, feedback type and start up method supported by the motor control library.
Control Methods
| Control Type | Controlled Entity | Feedback Type | Start up Method |
|---|---|---|---|
| Open Loop | Voltage | N.A. | N.A. |
| FOC in RFO | Current | Sensorless | Rotor Pre-Alignment |
| FOC in RFO | Current | Sensorless | Six Pulse Injection |
| FOC in RFO | Current | Sensorless | High Frequency Injection |
| FOC in RFO | Current | Sensorless | Dyno Mode |
| FOC in RFO* | Current | Encoder | Rotor Pre-Alignment |
| FOC in RFO | Current | Hall Sensor | N.A. |
| TBC in BC | Current | Hall Sensor | N.A. |
| TBC in TC | Current | Hall Sensor | N.A. |
| FOC in SFO | Torque | Sensorless | Rotor Pre-Alignment |
| FOC in SFO | Torque | Sensorless | Six Pulse Injection |
| FOC in SFO | Torque | Sensorless | High Frequency Injection |
| FOC in SFO | Torque | Sensorless | Dyno Mode |
| FOC in RFO or SFO | Speed | Sensorless | Rotor Pre-Alignment |
| FOC in RFO or SFO | Speed | Sensorless | Six Pulse Injection |
| FOC in RFO or SFO | Speed | Sensorless | High Frequency Injection |
| FOC in RFO or SFO | Speed | Sensorless | Open-Loop Volt/Hz |
| FOC in RFO* | Speed | Encoder | Rotor Pre-Alignment |
| FOC in RFO | Speed | Hall Sensor | N.A. |
| TBC in BC | Speed | Hall Sensor | N.A. |
| TBC in TC | Speed | Hall Sensor | N.A. |
*Encoder interface feedback type is only supported for PSOCC3 device.
What Changed?
v1.9.0
- Support for PSOCC3 and the Motor Control Driver Interface has been added.
Supported Software and Tools
This version of the motor control library was validated for compatibility with the following Software and Tools:
| Software and Tools | Version |
|---|---|
| ModusToolbox™ Software Environment | 3.3.0 |
| GCC Compiler | 11.3.1 |
| IAR Compiler | 9.50.2 |
| Motor Control Kit | KIT_XMC7200_DC_V1 & KIT_PSC3M5_CC2 |
| MCU | PSOCC3 & XMC7000 |
Minimum required ModusToolbox™ Software Environment: v3.3
Known Limitation
- Motor control library has external dependencies, it is advisable to use code example “ MOTOR DEMO ” as a starting point for developing motor control applications.
More information
Use the following links for more information, as needed:
© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2024.