0.4.5

MyHOME Integration Release v0.4.5

Installation

HACS (recommended)

1. Add this repository as a custom repository in HACS
2. Install the MyHOME integration
3. Restart Home Assistant

Manual installation

1. Download myhome.zip from the assets below
2. Extract it into custom_components/myhome/ in your Home Assistant
   configuration directory (the archive holds the integration's files
   themselves, with no top-level folder)
3. Restart Home Assistant

Changelog

Fixed

• A command written into a session the gateway had quietly closed is sent again. A MyHOMEServer1 drops a command session that has had nothing to send for about half a minute, without telling anyone; the next write into that socket succeeds locally while the frame never reaches the bus, and only the acknowledgement that never comes says so. Since 0.4.3 such a frame was neither sent again nor treated as lost — it was reported to the caller as delivered — so a light stayed off while Home Assistant showed it switching, and a shutter that never moved ran a phantom estimate to 35 %. Every transport failure is retried on a fresh session again, whatever the write itself returned, and a command counts as delivered only once the gateway has answered it (a refusal included), timed from the write that was answered. A command no attempt was answered for is dropped, so a cover cancels its estimate instead of timing a run that never started. The retry can put a second copy of a command on the bus, which for these commands changes nothing — on twice is on, up twice is up — and is the cheaper mistake by a wide margin.
• An idle command session is given back before the gateway takes it. Home Assistant held it for 60 seconds against the gateway's ~30, so in a quiet house the connection was usually already dead when the next command was written into it. It is now closed after 20 seconds of silence and re-opened on demand.