Gledopto GL-FL-004TZ - not supported

[volker73]

Am unfortunately a beginner in this area, although already have a few ZigBee devices in operation and all work with On / Off, color change etc..

I have now bought a LED floodlight "Gledopto GL-FL-004TZ", for which there is also a device sheet on your site.
There are apparently also several who have this spotlight successfully in operation.

The teach-in (connect) was no problem, it was also recognized.
I tried to switch the light on and off in different ways (JSON {"state: "on"}) but without success.

It appears constantly the message:
"Device with modelID 'GL-FL-004P' is not supported."

After the factory setting, there is a green light in the center of the emitter, but have not found any posts as to what this means.

I have also found the "Support new device" page. But this is beyond my capabilities!

I have a "RED MATIC 7.1.2" running on a RaspberryMatic.
I use "Z-Stack/ ZigBee Shepard"

What am I doing wrong?

kind regards
Volker

[Koenkk]

You are probably using an old z2m version, this device is supported in zigbee2mqtt 1.27.0

[volker73]

Hello, thanks for the answer. As mentioned, I am a beginner. I use RED NODE and the ZigBee Node - node-red-contrib-zigbee 0.20.0 Which Node should I use? - node-red-contrib-zigbee2mqtt 2.6.3 for example? There are are lot of dependencies which I have to install before Or am I on the wrong track? *Volker* Am Do., 25. Aug. 2022 um 17:30 Uhr schrieb Koen Kanters < ***@***.***>:

…

You are probably using an old z2m version, this device is supported in zigbee2mqtt 1.27.0 — Reply to this email directly, view it on GitHub <#13680 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASHBXCPJK7CMJVLPZ6OLTYTV26GSZANCNFSM57SGB4IQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Koenkk]

node-red-contrib-zigbee is a different project, it does not use Zigbee2MQTT. I suggest to create an issue in this repo: https://github.com/hobbyquaker/node-red-contrib-zigbee and ask if he can update the zigbee-herdsman-converters dependency.

[volker73]

Thank you for your help, sorry I was not at home during the weekend. I received you mail and your solution. I have opened a new issue one the page you told me. Volker Am Fr., 26. Aug. 2022 um 16:56 Uhr schrieb Koen Kanters < ***@***.***>:

…

node-red-contrib-zigbee is a different project, it does not use Zigbee2MQTT. I suggest to create an issue in this repo: https://github.com/hobbyquaker/node-red-contrib-zigbee and ask if he can update the zigbee-herdsman-converters dependency. — Reply to this email directly, view it on GitHub <#13680 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASHBXCPSZS6J75FATJUK3Z3V3DLJHANCNFSM57SGB4IQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>