[New device support]: FRIENT - ZIGBEE 3.0 INTELLIGENT SMOKE DETECTOR (DIN EN 14604 AND DIN 14676)

[baretd]

Link

https://www.domadoo.fr/en/peripheriques/5409-frient-zigbee-30-intelligent-smoke-detector-5713594002330.html

Database entry

"nodes": [ { "definition": null, "failed": [], "friendlyName": "Coordinator", "ieeeAddr": "0x84fd27fffe0e43c2", "lastSeen": 1686389490903, "networkAddress": 0, "type": "Coordinator" }, { "definition": { "description": "Smart carbon monoxide sensor", "model": "HS1CA-M", "supports": "carbon_monoxide, battery_low, battery, linkquality", "vendor": "HEIMAN" }, "friendlyName": "0x086bd7fffeaeb2a3", "ieeeAddr": "0x086bd7fffeaeb2a3", "lastSeen": 1686388694274, "manufacturerName": "_TYZB01_wpmo3ja3", "modelID": "TS0212", "networkAddress": 63451, "type": "EndDevice" }, { "definition": null, "failed": [ "lqi" ], "friendlyName": "0x0015bc003100bdba", "ieeeAddr": "0x0015bc003100bdba", "lastSeen": 1686389035731, "networkAddress": 5489, "type": "Unknown" }, { "definition": null, "failed": [ "lqi" ], "friendlyName": "0x0015bc003100be8f", "ieeeAddr": "0x0015bc003100be8f", "lastSeen": 1686388947429, "networkAddress": 23945, "type": "Unknown" } ]

Comments

FRIENT - ZIGBEE 3.0 INTELLIGENT SMOKE DETECTOR (DIN EN 14604 AND DIN 14676)

External converter

No response

Supported color modes

No response

Color temperature range

No response

[FabriceC01]

+1 for this support.
Lot of thanks

[Iroamstaff]

I was planning to buy this detector, I hope it will be taken care of
thanks a lot

[sjorge]

The heat detector variant is currently already support so it should not to too hard to add a converter, but the posted database entry seems to be for a HEIMAN HS1CA-M.

[FabriceC01]

Hello,
For me the database.db contains for my Frient smoke detector but I'm afraid it's much too short :

{"id":15,"type":"Unknown","ieeeAddr":"0x0015bc003100c2b0","nwkAddr":5910,"epList":[],"endpoints":{},"interviewCompleted":false,"meta":{},"lastSeen":1686414832145,"defaultSendRequestWhen":"immediate"}

[sjorge]

The field needed to give it an attempt is modelId which is also not listed.

[olgru]

I've 6 of these devices installed and running in Home Assistant for a longer time now. Z2M shows them as
Zigbee Modell SMSZB-120
Zigbee Hersteller frient A/S
Beschreibung Smoke detector with siren
Develco
Modell
SMSZB-120

They worked - however I always get Z2M configuration errors when restarting Z2M - I can ignore them...

Of course - might be other devices with just the same packaging and optic...

[FabriceC01]

up

[cnaslain]

A couple of months ago, I setup 3 Frient SMSZB-120 (HW: 5.0.2) Smoke detectors at my home Raspberry Pi/HA/ConBee II USB dongle setup running with docker-compose:

uname -a
Linux raspberrypi4b.xxx.com 5.10.63-v7l+ #1488 SMP Thu Nov 18 16:15:28 GMT 2021 armv7l GNU/Linux

I use for this setup the koenkk/zigbee2mqtt:1.29.2 docker image. I don't remember having any trouble with pairing those devices. They were recognized as Develco SMSZB-120 with the doc link to https://www.zigbee2mqtt.io/devices/SMSZB-120.html#develco-smszb-120.

This week, I've just tried to add a new Frient SMSZB-120 (HW: 5.0.2) Smoke detector with the latest docker image (koenkk/zigbee2mqtt:1.31.2) on another Raspberry Pi/HA/ConBee II USB dongle setup, separate apartment:

uname -a
Linux raspberrypizzz 5.15.61-v8+ #1579 SMP PREEMPT Fri Aug 26 11:16:44 BST 2022 aarch64 GNU/Linux

... but I failed with the following error:

Zigbee2MQTT:info  2023-06-27 19:15:43: smoke_detector (0x0015...180ed): Not supported (EndDevice)

• I tried to do a reset on the device before pairing; same result.
  I tried the same old koenkk/zigbee2mqtt:1.29.2 docker image; same result. I think the Zigbee connection is fine, cos in the device state, I can see

{
    "linkquality": 255
}

• Set back the latest docker version then remove and redo the pairing process:

pi@raspberrypimontcalm:~/domo $ docker-compose logs zigbee2mqtt | grep 0x0015...180ed
...
domo-zigbee2mqtt-1  | Zigbee2MQTT:info  2023-06-28 19:34:49: Device '0x0015...180ed' joined
domo-zigbee2mqtt-1  | Zigbee2MQTT:info  2023-06-28 19:34:49: Starting interview of '0x0015...180ed'
domo-zigbee2mqtt-1  | Zigbee2MQTT:error 2023-06-28 19:36:50: Failed to interview '0x0015...180ed', device has not successfully been paired

• I flashed the ConBee II USB dongle with the latest firmware (26780700) and reset the device, restart the zigbee2mqtt container with the latest version and retry to join... Same behavior :-(

• I compared the content of /app/node_modules/zigbee-herdsman-converters/devices/develco.js for image: koenkk/zigbee2mqtt:1.29.2 and image: koenkk/zigbee2mqtt:1.31.2 and only some white-spaces differs so I guess the two images have the same behavior for this smoke sensor.

• I've added the new device to my other (old) home domotic system: No problem to join it! The firmware versions are different, the 3 previous devices has these firmware: 262149, and the new one has the 262151 version (newer!); the latest available is 262152. I'm gonna try to update the new device firmware to the latest version and see if this makes any changes...

• New try with an upgrade of the raspberry pi. This time, I lost the /dev/serial/by-id folder and zigbee2mqtt no longer starts! I finally fix this by manually applying the https://github.com/systemd/systemd/pull/25246/files fix + reboot. Now zigbee2mqtt starts again but the device is not recognized.

uname -a
Linux raspberrypimontcalm 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023 aarch64 GNU/Linux

• At my other (old) home setup I was using an USB Hub to connect my USB dongles: An Anker Data Hub 4 Ports USB 3.0 (ref https://www.amazon.fr/gp/product/B00Y25XFGK/) so I move it to the apartment and retry connecting the EnOcean/Zigbee USB dongles to the USB hub and not directly to the raspberry pi: hooray!!! If finally works !!!

I have no explanation why my other zigbee device (zlinky) does work without the hub and why the smoke detector does not. But at least, I have a workaround: The USB Hub :-)

PS: Looking for an explanation... Read the Intel article (https://www.usb.org/sites/default/files/327216.pdf) about USB 3.0 known issue interference with 2.4GHz wireless devices. But in my setup, the ConBeeII dongle key was on a 1m USB cable, quite far from the raspberry pi.

[github-actions]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days

[Rappelkiste98]

The unit is recognised as "Develco SMSZB-120", but there seems to be an error configuring it. The parameters temperature, reliability & fault cannot be used. The following error is displayed:

Failed to configure 'Rauchmelder 2', attempt 3 (Error: Bind 0x0015bc003101c521/35 genBasic from '0x00212effff08285a/1' failed (Error: status: 140) at DeconzAdapter.bind (/app/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:766:19) at Endpoint.bind (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:643:13) at Object.bind (/app/node_modules/zigbee-herdsman-converters/src/lib/reporting.ts:43:9) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/devices/develco.ts:470:13) at Configure.configure (/app/lib/extension/configure.ts:117:13))

[cespar]

I have the same error, is there a way to fix it?

[jsa91]

Successfully paired SMSZB-120 with SONOFF zbdongle-E. Firmware 7.3.1.0, build 176. No reported errors.