What happened?
I've bought a Tuya Fingerbot and it got recognized only as a switch. Not all parameters are here, only state,
power_on_behavior and linkquality
I've also tried with z2m Edge 1.32.1-dev commit: ba0cc61
Details:
Device type
EndDevice
Zigbee Model
TS0001
Zigbee Manufacturer
_TZ3210_j4pdtz9v
Description
1 gang switch
Support status
Supported
IEEE Address
0xa4c138314067ddc3
Network address
0x6041
Manufacturer
TuYa
Model
TS0001
What did you expect to happen?
It should be recognized as TS0001_fingerbot with other options like switch mode, upper and lower position.
How to reproduce it (minimal and precise)
Include a Tuya Fingerbot plus _TZ3210_j4pdtz9v in z2m
Zigbee2MQTT version
1.32.2-1
Adapter firmware version
20220219
Adapter
sonoff ZigBee 3.0 cc2652p
Debug log
No response
What happened?
I've bought a Tuya Fingerbot and it got recognized only as a switch. Not all parameters are here, only state,
power_on_behavior and linkquality
I've also tried with z2m Edge 1.32.1-dev commit: ba0cc61
Details:
Device type
EndDevice
Zigbee Model
TS0001
Zigbee Manufacturer
_TZ3210_j4pdtz9v
Description
1 gang switch
Support status
Supported
IEEE Address
0xa4c138314067ddc3
Network address
0x6041
Manufacturer
TuYa
Model
TS0001
What did you expect to happen?
It should be recognized as TS0001_fingerbot with other options like switch mode, upper and lower position.
How to reproduce it (minimal and precise)
Include a Tuya Fingerbot plus _TZ3210_j4pdtz9v in z2m
Zigbee2MQTT version
1.32.2-1
Adapter firmware version
20220219
Adapter
sonoff ZigBee 3.0 cc2652p
Debug log
No response