BrokkrSculpt open beta

Download

Windows (64-bit)	BrokkrSculpt-Windows-x86_64.zip
macOS (Apple silicon)	BrokkrSculpt-macOS-arm64.zip
Linux (64-bit)	BrokkrSculpt-Linux-x86_64.tar.gz

Those three links always point at the newest build. Everything in the
asset list below named update-… is for the built-in updater to
fetch; you never need to download one by hand.

An open beta, and unsigned. Both matter to what you are about to see.

The dialog your OS will show you

Nothing here is signed by Apple or Microsoft, because those cost money
this project does not have yet. Neither warning is about anything being
wrong with the download.

• macOS will say "BrokkrSculpt.app is damaged and can't be opened."
  It is not damaged; that is what Gatekeeper says about any unsigned app
  from the internet. Move it to Applications, then in Terminal run
  xattr -dr com.apple.quarantine /Applications/BrokkrSculpt.app and
  open it normally.

  Not Control+click then Open -- Sequoia removed that. The supported
  route is System Settings > Privacy & Security > Open Anyway after
  a failed launch, but it wants an admin password, only offers the
  button for about an hour afterwards, and an app with no signature at
  all may not appear there to be excused at all. The quarantine flag is
  the one path that does not depend on any of that, and it turns off
  nothing system wide.

• Windows will show "Windows protected your PC" from SmartScreen.
  Click More info, then Run anyway.

• Linux has nothing to say about it. Untar and run ./brokkrsculpt.

Known, and worth knowing before you file it

• macOS masking renders wrong. A masked body's tint spreads past the
  mask and shows a seam between bricks. The geometry is correct and
  everything else works; this is a difference in how the Metal backend
  reads a vertex attribute and it is being chased. Linux and Windows are
  unaffected.
• Windows and macOS have no stylus pressure and no SpaceMouse. Both
  are read straight from the Linux kernel today; the other two platforms
  fall back to full pressure and no puck.

Updates

This build can update itself. The tick is on the welcome screen and in
the Help menu, on by default, and turning it off stops the check as
well as the offer. Every update is signed and verified before anything
is written.

The swap has only been run for real on Linux. Windows and macOS
share the same verified download and the same checks; what is untested
there is the replacement itself. Both keep the previous build and leave
a RECOVER-BROKKRSCULPT.txt beside the application saying how to
restore it. BROKKR_NO_SELF_UPDATE=1 downloads and verifies but never
installs.

Reporting

Help > Report a bug sends straight from the app, anonymously unless you
have signed in.

What changed

The first public build

BrokkrSculpt is now downloadable for Linux, Windows and macOS. Nothing is
signed yet, so both Windows and macOS will warn you about the download — the
release notes quote each warning and say what to do about it.

The three are not equally finished, and
the README says specifically what is unproven on each.
Linux is where this is built and used every day. Windows and macOS compile from
the same commit and pass the same suite, but have had far less time in front of
real hardware.

Added

• Your own filaments in the exported 3MF. A new FILAMENT section in the
  properties panel shows what is loaded in each of the printer's slots, and
  Sync filaments from printer reads it straight off a Snapmaker U1 over the
  network — colour, material and vendor per tool head. Exporting a 3MF now
  declares those filaments, so the file opens in OrcaSlicer showing what is
  actually in your machine instead of four built-in colours nobody chose.

  A slot with nothing loaded is left alone rather than blanked, and the status
  line says which ones were skipped. The palette is kept in filaments.conf
  beside your printer settings and can be edited by hand.

• Paint, in filament slots. Brush 8 paints the surface under the
  stroke with one of your printer's slots — pick which on the swatch row that
  replaces the strength slider while the brush is live — and ctrl or
  alt drag erases. What you paint is a slot NUMBER, never a colour: the
  viewport shows it in whatever that slot's filament is today, the FILAMENT
  panel's show paint hides it without changing anything, and the exported
  3MF assigns each painted triangle to that slot, so OrcaSlicer opens it ready
  to print in those filaments. Paint is saved with the model, undone a stroke
  at a time, mirrored with the mirror planes, and stencilled by the surface
  patterns. It has no strength or falloff, because a slot has no half.

  Paint travels with the material: through the transform gizmo, a turn, a
  resample, a merge, a split, a duplicate and under the Move brush. A cut
  face is unpainted, because it is new surface; paint it if you want it in
  another filament. The edge of a painted region is cut through the
  triangles it crosses rather than stepping a whole triangle at a time, in
  the viewport and in the exported file alike, so a curve painted across a
  form comes out as a curve.

Fixed

• Windows said "no tablet found" to everyone. The PEN panel and the bug
  report read a device list that only the Linux scanner ever filled, so on
  Windows the line was a default rather than a finding, whether or not a pen
  was reporting. Windows now enumerates its HID devices at startup, names the
  pen with its pressure range, tilt and eraser, and listens for a pen whichever
  of the two top-level usages its driver presents. `brokkrsculpt.exe --tablets

  tablets.txt` lists every HID device and says why each is or is not a
  stylus, including the mouse-mode case, which is the one to check first: a
  tablet whose driver has Windows Ink switched off is a mouse to every
  application. A tablet plugged in after launch is not seen until a relaunch.

• Vendor forks and every packaging format are found, not just OrcaSlicer.
  Snapmaker ships its own OrcaSlicer fork, BambuStudio is the same lineage again,
  and any of them can arrive as a native package, an AppImage, a flatpak or a
  snap. Rather than a list of names times a list of install locations — a table
  that is wrong the day somebody forks again — a preset directory is now
  recognised by its shape, and the slicer's config file is read by its own name
  instead of always OrcaSlicer.conf. Where several are installed, the one you
  used most recently wins.

  If yours still is not found, put datadir = /path/to/it in slicer.conf
  beside your other settings and it is used before anything is probed.

• Opening an exported 3MF no longer changes your printer in OrcaSlicer. The
  file named no machine, so Orca invented a printer, a process and four filaments
  all called (yourfile.3mf) — and wrote that invented printer into its own
  settings, so the machine you had selected was displaced by opening a model. An
  export now names the presets your slicer already has.

  Your printer's address and credentials are deliberately left out of the
  file. A machine preset holds print_host, printhost_apikey and
  printhost_password; an exported model is something you hand to other people,
  so those keys are stripped on the way in. Binding matches on the preset name,
  which is not a secret.

  If your presets cannot be read, the export still works and the status line says
  so rather than leaving you to find out in the slicer.

• An exported 3MF now sits on the bed instead of half under it. A 3MF opened
  as a project is placed exactly where the file says, unlike an STL, which the
  slicer drops onto the bed for you — and the file said the origin, so the model
  arrived on the plate's front-left corner with half of it below the bed. It now
  carries a transform that rests it on the bed and, when your OrcaSlicer machine
  preset can be read, centres it on your actual plate. Only 3MF was affected;
  STL and OBJ never carried a transform and are unchanged.

• "Check printer" reads the config file it tells you to write. It looked for
  printer while every other setting in the application is a .conf file, so a
  perfectly good printer.conf was ignored and the application reported no
  printer at all. Both names are read now, and a missing file names the .conf
  one.

• Sign in to TinkerAtlas, optionally. It exists for one reason: an
  anonymous bug report cannot be answered. Signed out, a report carries no
  account and no credential; signed in, it goes under your name — and the line
  above the Send button says which before you press it.

• A bug button in the corner of the viewport, so reporting something does
  not require finding a menu.

• Updates, checked and applied. The application asks GitHub which build is
  published, and can download and install it for you. Three things are worth
  knowing before you decide whether you want that.

  It is on by default and there is a tick to turn it off — on the welcome
  screen, and in the Help menu so it stays reachable once you have turned the
  welcome screen off. Turning it off stops the check as well as the offer;
  nothing phones home to display nothing.

  Every update is signed, and the signature is checked before anything is
  written. What is signed is a manifest carrying the length and the SHA-256 of
  each download, so the bytes are bound to the release they claim to belong...