go2rtc 1.9.14 (Signed)

These .eap packages are signed with the Axis ACAP signing service and install
normally on AXIS OS 12.10 and later.

Upgrading from an earlier version

Because the signing vendor changed, installing over a previously installed
unsigned version can fail with "Couldn't install: app". The device log
shows:

Vendor ID in manifest does not match the vendor ID of the previous version

To upgrade: back up your app configuration, uninstall the existing app,
then install this signed version.

go2rtc 1.9.14-1 (AXIS OS 13 ready)

Packaging rebuild of go2rtc 1.9.14 prepared for AXIS OS 13 (no change to the go2rtc server itself).

What changed

• Rebuilt against ACAP Native SDK 12.10.0 / Ubuntu 24.04 (64-bit time_t, Y2038-safe).
• Manifest migrated to schema 2.0.0 with compatibleOsVersions (max 13); installs cleanly on OS 13 devices that reject incompatible apps.
• Build hardening: non-executable stack, -std=gnu11 to avoid C23 symbol traps.

Compatibility

• Live-validated running on AXIS OS 11.11.212 (P3265-LVE) and 12.10.73 (Q3538-LVE).
• Still installs on older firmware (OS 10/11/12); compatibleOsVersions is only enforced from OS 12.10 onward.
• Unsigned build. Unsigned apps still install below OS 13 and on current OS 13 devices; portal signing is planned.

Downloads

• go2rtc_1_9_14_aarch64.eap - ARTPEC-7/8/9 (64-bit), CV25
• go2rtc_1_9_14_armv7hf.eap - ARTPEC-6/7 (32-bit), older devices

go2rtc ACAP 1.9.14

ACAP packages bundling go2rtc v1.9.14.

Downloads

• go2rtc_1_9_14_aarch64.eap for ARTPEC-7/8/9 (64-bit), CV25
• go2rtc_1_9_14_armv7hf.eap for ARTPEC-6/7 (32-bit) and older devices

Install

Camera web UI > Apps > Add app > upload the .eap for your architecture, then open http://:1984/

Check your camera's architecture with Properties.System.Architecture in param.cgi.