GitHub - MorseMicro/morse_driver

Name		Name	Last commit message	Last commit date
dot11ah		dot11ah
mmrc-submodule @ 24f6c69		mmrc-submodule @ 24f6c69
mmrc		mmrc
.gitignore		.gitignore
.gitmodules		.gitmodules
Kconfig		Kconfig
LICENSE		LICENSE
Makefile		Makefile
README		README
apf.c		apf.c
apf.h		apf.h
beacon.c		beacon.c
beacon.h		beacon.h
bss_stats.c		bss_stats.c
bss_stats.h		bss_stats.h
bus.h		bus.h
bus_test.c		bus_test.c
cac.c		cac.c
cac.h		cac.h
capabilities.h		capabilities.h
chip_if.h		chip_if.h
command.c		command.c
command.h		command.h
compat.h		compat.h
coredump.c		coredump.c
coredump.h		coredump.h
crc16_xmodem.c		crc16_xmodem.c
crc16_xmodem.h		crc16_xmodem.h
debug.c		debug.c
debug.h		debug.h
event.c		event.c
firmware.c		firmware.c
firmware.h		firmware.h
hw.c		hw.c
hw.h		hw.h
hw_beacon.c		hw_beacon.c
hw_beacon.h		hw_beacon.h
hw_scan.c		hw_scan.c
hw_scan.h		hw_scan.h
hw_trace.c		hw_trace.c
hw_trace.h		hw_trace.h
init.c		init.c
ipmon.h		ipmon.h
led.c		led.c
led.h		led.h
mac.c		mac.c
mac.h		mac.h
mac_config.h		mac_config.h
mbssid.c		mbssid.c
mbssid.h		mbssid.h
mem_access.c		mem_access.c
mem_access.h		mem_access.h
mesh.c		mesh.c
mesh.h		mesh.h
minstrel_rc.c		minstrel_rc.c
minstrel_rc.h		minstrel_rc.h
misc.h		misc.h
mm6108.c		mm6108.c
mm8108.c		mm8108.c
mmrc_debugfs.c		mmrc_debugfs.c
monitor.c		monitor.c
monitor.h		monitor.h
morse.h		morse.h
morse_commands.h		morse_commands.h
morse_rate_code.h		morse_rate_code.h
ndpprobe.c		ndpprobe.c
ocs.c		ocs.c
ocs.h		ocs.h
of.c		of.c
of.h		of.h
offload.c		offload.c
offload.h		offload.h
operations.h		operations.h
page_slicing.c		page_slicing.c
page_slicing.h		page_slicing.h
pager_hw.c		pager_hw.c
pager_hw.h		pager_hw.h
pageset.c		pageset.c
pageset.h		pageset.h
peer.c		peer.c
peer.h		peer.h
ps.c		ps.c
ps.h		ps.h
pv1.c		pv1.c
pv1.h		pv1.h
raw.c		raw.c
raw.h		raw.h
rc.c		rc.c
rc.h		rc.h
s1g_ies.h		s1g_ies.h
s1g_radiotap.h		s1g_radiotap.h
scan_result_cache.c		scan_result_cache.c
scan_result_cache.h		scan_result_cache.h
sdio.c		sdio.c
skb_header.h		skb_header.h
skbq.c		skbq.c
skbq.h		skbq.h
spi.c		spi.c
sysfs.c		sysfs.c
sysfs.h		sysfs.h

Repository files navigation

Cross-compile driver 
--------------------

To cross-compile, you will need a compiled kernel to build against.

To compile the driver, make sure your cross-compiler is in your PATH.

Then build the driver:

(Update ARCH, CROSS_COMPILE and KERNEL_SRC as appropriate)

    make MORSE_TRACE_PATH=`pwd` ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- KERNEL_SRC=~/linux CONFIG_WLAN_VENDOR_MORSE=m CONFIG_MORSE_SDIO=y CONFIG_MORSE_USER_ACCESS=y