GeoDms 20.19.2

Pre-release. GeoDms 20.19.2 covers everything since 20.16.0 — 20.17.0 was published, 20.18.0 through 20.19.1 followed. Headlines of this release: three deadlocks that used to park a computation at 0% CPU with no error now report themselves, connect accepts its two geometries the other way round and gains matrix variants, a shapefile is written with closed rings, and the teardown and allocation fixes of 20.19.1. The .g (GLOBIO) flavour ships alongside .m, .c and .l.

Flavour	Asset
.m — Windows, MSBuild	GeoDms20.19.2.m-Setup-x64.exe
.c — Windows, CMake	GeoDms20.19.2.c-Setup-x64.exe
.g — Windows, GLOBIO compatibility	GeoDms20.19.2.g-Setup-x64.exe
.l — Linux, Ubuntu 24.04	GeoDms20.19.2.l-linux-x64.deb, .tar.gz (+ .sha256, .sha256.p7s)

Allocation

• A land use type that is no option no longer fails the allocation. Measuring the distance from optimum — which only builds the DiscrAlloc completed … status line — added the shadow price to an undefined suitability, where the bidding loop itself skips such a type before doing any arithmetic. On a model with null suitabilities that ended the whole run with numeric overflow in the shadow price arithmetic. The same addition used to wrap silently, so a type that was never an option compared as a better bid: the "at most N from optimum due to M better options" figures have been wrong for such models for as long as they have existed, and are now right.
• The Simulation-of-Simplicity perturbation range is checked once per run instead of at every use, and reported before the solve starts rather than partway through an allocation.
• discrete_alloc arithmetic audited (#1196). The claim aggregates were summed in UInt32: two land use types at the "no limit" maximum claim sum to exactly 2^32, read back as zero, and the run was rejected as infeasible — four cells are enough, no grid needed. Shadow prices now go through checked arithmetic naming the component that overflowed, and six discrete_alloc_*_pi64 names offer a 64-bit perturbation.

Robustness

• Three deadlocks no longer park silently (#1233). Each showed the same thing to the user: a computation at 0% CPU, no error, no log line. The one that bit hardest is in deterministic tile accumulation, where every data tile waits for the result tile counter to reach its own number — so a tile that unwinds (a read error, a cancellation, a failed allocation) advances nothing and every later tile waits for it forever, taking the parallel_tileloop and its Join with it. Failure is now published and the waiters are woken. The lock inventory and the ceilings that make such orderings checkable are documented alongside (#1227, #1233).
• GDALAllRegister is serialized (#1234). GeoDmsRun died with 0xC0000374 (heap corruption) or 0xC0000005, with no [E] line and part of the tif set already written, when ten gdalwrite.grid items with an aggregating IntegrityCheck were pulled by one ExplicitSuppliers trigger. The fallback registration for an extension with no known driver was the one path not taken under the GDAL section lock, and GDALAllRegister is not thread-safe.
• A derived values unit stays alive (#1237). The single-argument area / arc_length / mls_length derives its result unit from the geometry's coordinate unit, but a data item holds its values unit only weakly, so that parentless unit was freed while still referenced.
• A process no longer aborts at exit with a corrupted heap. Reporting the final allocator summary allocates, and allocating can post to the main-thread operation queue — which, by the time a static destructor of the same library runs, has itself been destroyed, so the post freed an already-freed buffer. The damage surfaced much later as an abort during process exit, with a stack naming an unrelated allocation. It cost roughly one run in ten on a loaded machine and nothing at all on an idle one; on Linux it aborted the GUI, on Windows the heap may absorb it silently. The summary now comes from an explicit terminate step while the process is still whole.
• #1191 — what aborts the process is named, and the cancellation paths no longer abort it. #1206 — GDAL cleanup ordering at process shutdown. #1225 — a GUI closed with work abandoned no longer ends in uncaught DmsException: Cannot find Domain unit ..
• #1226 / #1227 — the export dialog no longer hangs on a cold item: GetName() hands out a lock on the token registry, and holding it across a walk that parses an expression made the main thread wait for itself. That self-deadlock is now reported rather than parked on.

Polygons

• A ring's role is read relative to the first ring, not to the compass (#1212). The GEOS and CGAL readers judged each ring absolutely — shell iff clockwise — so a feature whose rings are uniformly counter-clockwise, which is what a source listing coordinates in latitude/longitude order gives you, lost its shell and promoted the lake behind it. Nothing was rejected and nothing was empty: ordinary-looking geometry with the wrong area. A configuration's areas may change on upgrade; the older numbers were the wrong ones. What that means in practice is measured on a real model in #1230: in the RSopen regression, 105,051 BAG building footprints stored counter-clockwise — none of which has a hole, so nothing was left to promote — were read as empty and are now read correctly, while 232 CBS land-use polygons whose rings are only partly flipped were read 2,298 ha too large and now match their stored area. Both directions occur, so an area can grow or shrink; a feature that is only partly flipped still needs fix_winding_order.
• Nesting-based winding-order operators (#302) on GEOS: fix_winding_order, fix_polygon, has_correct_winding, geos_polygons_by_nesting. #1219 — points2polygon no longer requires a closed ring the readers close themselves. #917 — Minkowski sums take the kernel as an argument, deprecating 48 bp_* names.

Storages and export

• A shapefile is written with closed rings. Both writers stored a polygon's rings exactly as the value held them, but a GeoDMS polygon need not repeat a ring's first point at the end and the ESRI specification requires that it does. The result violated the format, and gdal.vect — which a .shp StorageName selects since 17.0.0, so the engine's own default reader for the file it just wrote — refuses such a file with "Non closed ring detected".
• gdalwrite.vect recognises a geometry by its composition, not by the name geometry (#1232). A geometry column called anything else was measured against the driver's creation field types — and no OGR field type corresponds to fpoint, dpoint or spoint — so the write was refused with "driver ESRI Shapefile does not support writing of values", and the layer was created without a geometry field.
• A layer's companion columns come into play at write time (#1229).
• Writing vector layers (#711). gdalwrite.vect created a field for every storable attribute and left the rest <null> when only one column was of interest. A column of interest now pulls in the other columns of its layer for exactly as long as the outside interest lasts. A unit that both declares a SpatialReference and has a calculation rule no longer loses that CRS, so a shapefile gets its .prj again.
• Missing VAT when exporting to dbf or gpkg (#973) — four separate defects, among them a native shapefile branch that compared against the wrong driver name and had been dead since 2023, with the resulting storage failure reported to the user as "Export ready".
• A unit carrying an attribute of another domain exports as a table again (#1145).

.mmd dictionaries

• Unit paths are absolute, in declarations and checks alike (#1195). A domain configured as ../RegioUnit went into the dictionary verbatim, so a reader merging that store elsewhere resolved the dots against its structure: Unknown identifier '../RegioUnit'. The store could then not be read at all.
• A differing dictionary root name is provenance, not a warning (#1194), and a check that cannot be built now names itself (#1197).

IntegrityChecks and fences

• A check now guards an item read from a storage (#1209) — such an item has no calculation rule, so consumers were handed an unguarded source reference and the check ran only after data preparation.
• A check on an ExplicitSuppliers item guards the item that declares it (#1218). Selecting either item in the TreeView previously ran no check at all.
• A phase runs when a member is reached (#1167), collecting a phase member is re-entrant (#1201), indirect expressions behind a fence are rejected (#1199), and the phase scan honours the static argument policy (#1224).

Charts and views

• A new chart no longer waits for its own classification (#1221), position axes fit their data instead of forcing zero into view (#1222), row-number axes are labelled from the domain's Label attribute (#1207) and tick labels take the thousand separator (#1223).
• Each chart kind has its own icon (#1211), the View and Window menus and window titles are drawn from the TreeView's icon set (#1220), and tree icons say what an item is (#319) rather than which views can be opened on it.
• The active TreeView item is visible again (#1235). Selecting an item changed nothing on screen — no colour, no focus caret, not even the 2px border the delegate believed it was drawing, because the base style re-ran initStyleOption on its own copy and painted the background back over it.
• Every DataView caption leads with the kind of view, and a missing SpatialReference is named (#1238). A map view whose world coordinate unit declares neither a SpatialReference nor a Label produced a caption starting with a bare ", Active layer: ...", which read as a formatting glitch rather than as the fact that no coordinate system was configured.
• Editing a calculated class break, colour or label copies the values first (#634); a classification can be copied from one map view and applied in another (#734); the EventLog filter panel is no longer squeezed (#1213); the legend-width menu items name the keys that actually work (#1217). The main window's placement is recorded while it is up, so a session ending in a crash no longer restores a placement from days ago.

Networks

• connect accepts its two geometries the other way round (#1228). connect, connect_eq, connect_ne, connect_info(_eq/_ne) and dist_info took the arcs first and gave every point its nearest arc. Passing the points first turns them into a choice set: every arc gets the nearest of them, measured to the nearest location on that arc. A reversed connect_info names its relation member point_rel rather than arc_rel, and it is the key of the arc whose null value waives an eq/ne comparison — the mirror of the forward rule. The filtered search now also reports when it found nothing, and the reversed search is capped at maxSqrDist instead of being cancelled.
• connect_matrix / dist_matrix (#1236) — where connect_info gives each feature its nearest point, these give every point within a maximum distance, as a sparse matrix: a fresh domain of (feature, point) pairs carrying arc_rel, point_rel and dist, plus CutPoint / InArc / InSegm / SegmID for the connect_matrix half. Both have _eq and _ne variants.
• Bi-criteria (pareto) impedance_matrix (#856) — a second Dijkstra engine keeping the pareto-optimal set over two impedances instead of collapsing them into one weighted cost.
• od:StartPoint_rel is written (#1210) — the member was created, allocated and committed but never filled, so requesting it yielded uninitialised memory. NYI since 2022.

Configuration language and diagnostics

• The engine no longer reports case mix-ups about its own names (#1161). The regression battery emitted 2747 case warnings over 233 configurations with not one clean; ten of every eleven were the engine disagreeing with itself. unit, value, item, param, attr and nrofrows are now canonically lower case, chosen by census over 1146 .dms files. Battery: 2747 → 40 lines.
• union_data warns when its arguments do not match the parts of its result domain (#990), the legacy brace range spelling is caught on either bound (#1165), and select_spec / collect_spec (#337) take their four choices as a ;-separated word list.
• table_spec and stable sort_index helpers (#421); editor navigation into a template instantiation (#471); a worker thread's internal error names the item it was working on (#1202); a configuration can decide whether its hidden items are shown (#694).
• Source Description covers what a storage feeds (#975), and the CalcCache machinery is retired (#1189) — a configuration still spelling %calcCacheDir% now gets an unknown-placeholder error.

Packaging and build

• The .g (GLOBIO) flavour, built from the same solution with a committed GeoDmsGlobio switch against the older GDAL/GEOS stack, with its own output tree and vcpkg manifest. Install it only where that stack is required; .m remains the ordinary Windows build.
• The VS Code extension ships with the setup, and the editor language definitions are generated from the operator registry: 23 names that no longer resolved to anything registered were removed.
• The .g flavour is gated like the others (#1231) — batch\TestGlobioReleaseUnit.bat and TestGlobioDebugUnit.bat run the unit suite, the testcases battery and the shipped-content test against bin_GLOBIO\, and the setup script installs only when all three pass.
• A GUI test script no longer aborts on a byte outside ASCII, reports a script error as exit 1, and dispatches SaveValueInfo on Linux too (#1239).
• Multi-version Python bindings (#1105), and #1186 — the .c setup now ships the MSVC runtime instead of borrowing whatever redistributable happened to be in System32.
• Every text blob in the repository is stored with LF. Source only; nothing about the shipped binaries changes.